Kyocera TASKalfa 250ci Manuals

SERVICE MANUAL Published in July 2010 842H7116 2H7SM066 Rev. 6 TASKalfa 250ci/300ci/ 400ci/500ci

Technical Reference PRESCRIBE Commands

Command Reference PRESCRIBE Commands

Network FAX Driver Operation Guide

ID Register OPERATION GUIDE

Operation Guide KM-NET for Accounting

KYOCERA COMMAND CENTER Operation Guide

Operation Guide KM-NET for Direct Printing

Create a new KPrint port KPrint Installation 1-1 KPrint Installation KPrint installs a client port monitor that enables Windows TCP/IP printing to any network card connected to a printing system. KPrint supports Raw mode, LPR, IPP, Email, and Network FAX printing. KPrint Setup It is strongly recommended that you exit all Windows programs before running this setup program. 1 In Windows, click Start > Run. Type the file path: 1 :\Network\KPrint\KPInst.exe Click OK. 2 In the Welcome to KPrint Setup page, click Next to continue with the Setup program, or click Cancel to quit setup. 2 3 The KPrint Setup page displays a default Destination Folder. Click Next to accept the folder and continue the setup, or Browse to select another location for the KPrint utility files. 3 4 The next KPrint Setup page displays a default Program Folder name where the setup program will add program icons. (You can type a new folder name, or one from the Existing Folders list.) Click Next. 4 5 The last KPrint Setup page displays a KPrint is successfully installed message. You can: 5 • Select Yes to add a new KPrint port using the KPrint Add Port Wizard. Click Finish. (The selections for adding a new port appear in step 6 on page 1-2.) • Select No to close the KPrint Setup Wizard without adding a new port. Click Finish. Create a new KPrint port More commonly, KPrint ports will be created using the Add Printer Wizard. 1 Click Start in the Windows taskbar, and click Printers and Faxes to open the Printers and Faxes window. 1 2 Click Add a printer in the Printer Tasks group box on the left. 2 Note: The Add Printer Wizard can also be launched by clicking Add printer in the File menu of the Printers and Faxes window. 3 The Add Printer Wizard page appears. In the Welcome page, click Next and follow the instructions. 3 4 Select Local printer attached to this computer. Click Next. 4 5 Select Create a new port, scroll down to KPrint Port. Click Next. 5

Scan to SMB(PC) Set up Guide