laerdal Upright Resuscitator Manuals

Intended Use Laerdal Upright Resuscitator (”Upright”) is a self-inflating, manual, reusable resuscitator intended for newborns and infants up to 10 kg body mass who require respiratory support. Upright can provide supplemental oxygen only when used with the accessory Oxygen Kit. Upright may be reused provided reprocessing procedures (page 2) are followed between each patient use. It must be cleaned and disinfected before first use. Using Upright Orientation: Upright is operated as a normal resuscitator, with the bag having a vertical stance over the mask. Newborn Mask - Snap design: The mask fits with standard 15 mm inner-diameter conical connectors, as defined by ISO 5356-1. Check fit before use with other devices. When used with Upright, the mask attaches with a snap fit when pressed completely into place. User Guide Cat. no Description 856156 856157 8561733 846131 856155 Regulatory 0434 REF 15 mm Dead space -18 °C to 50 °C -40 °C to 60 °C <2.5 cm H2O at 5 LPM <0.5 cm H2O at 5 LPM >150 ml 4 ml (water volume) Approximately o 72 mm x 85 mm x 217 mm Approximately 20-08250 Rev B User Guide Laerdal Upright Resuscitator REUSABLE - AUTOCLAVABLE Pressure release valve: Upright has a pressure release valve (“pop-off”) which limits the airway pressure to 30-45 cmH2O. A hissing sound can be heard when the valve opens. If higher airway pressure is needed, press downwards on the valve with the index finger while squeezing the bag. Vomitus: If the patient valve becomes contaminated with vomitus, clear the valve by shaking Upright and forcefully squeezing the bag to expel the vomitus. If it does not clear, disassemble the patient valve (see page 2), rinse it in water and then reassemble it. If any components are loose, tighten or reassemble the device and test in accordance with page 2. Warnings Upright should only be used by persons who have received sufficient training in its use. Incorrect operation of the Upright can be hazardous. Do not use the Upright if you have any reason to be concerned about its functionality. For proper function, ensure that Upright components are not mixed and confused with similar-looking non-Laerdal components. All Upright components are marked LAERDAL, as shown on page 2. Cat. no. 8560533 QTY 1 each Accessories and Spare parts Important Product Information Newborn Mask - Snap design – Size 0* Newborn Mask - Snap design – Size 1* * 10 pcs Oxygen kit (Complete) includes Oxygen Adaptor, Valve, Reservoir Bag and Tubing Oxygen Reservoir Bag and Tubing Upright Valves and Membranes kit* (Lip Valve, Inlet Valve Disc Membrane) * 10 pcs Upright Oxygen kit (Complete) This product is in compliance with the essential requirements of Council Directive 93/42/EEC as ammended by Council Directive 2007/47/EC. Technical Information Meets ISO 10651-4:2002/EN ISO 10651-4:2009, Lung ventilators – Particular requirements for operator–powered resuscitators. Patient port on Newborn Mask Snap design fit standard 15/22 mm connector. Operating temperature Storage temperature Expiratory resistance Tidal volume Inspiratory resistance External dimensions (with Newborn Mask size 1) Mass (with Newborn Mask size 1) 190 grams Hard plastic components: Polysulfone (PSU) Soft plastic components: Silicone rubber Spring: Stainless stee Not made with natural rubber latex. Page 1 Manufacturer Information Global Warranty: See www.laerdal.com Manufactured in China for: Laerdal Medical AS, Tanke Svilandsgate 30 P.O. Box 377, 4002 Stavanger, Norway Tel : +47 51 51 17 00 Fax: +47 51 52 35 57 Email: [email protected] Pending US and international design registration. Laerdal® is a trademark or registered trademark of Laerdal Medical AS. © 2015 Laerdal Medical AS, All rights reserved. Includes Newborn Mask (Snap design) Size 0 and Size 1 Materials