LAMBORGHINI URUS Manuals

LAMBORGHINI URUS INSTALLATION MANUAL For: • cable loom • Electronics • Bridge plug • Installation manual • side cutter • small screwdriver • ratch with 13‘ nut Package contents Requested Tools 2 To be able to take the benefits of all technical advantages of your newly purchased additional electronics, please consider the following advices. Do not use the additional electronics before you have read and understood the „Important infromation“. The installation confirms the buyer has read, understood and accepted the „Important information“. Important! In order to ensure maximum performance, at least 98 RON must be fueled. Hinweis / Note 3 5 min 1. Wait 5 minutes after locking!!! 2. Do not open any doors during this time. 3. During this time all sensors of the vehicle switch off. 4. After the 5 minutes you can begin with the installation. Notes to be observed during the installation! When installing the wiring harness and the electronics, pay attention to the following: • Do not mount near moving parts • Protect from vibration and water • Do not attach the electronics to hot parts. Preparation for installation LOCK 1. Switch off your vehicle! 2. Open the hood. 3. Lock all doors and close your vehicle. Do not perform the installation when the ignition is on! PREPARATION 4 Preparation • Loosen the both clips to remove the engine cover.