-
connecting your business
1
-
2 Operation of Web-based Management
8
-
2.1 Connecting network devices
10
-
The logical port number for this row.
13
-
Disabled: All power savings mechanisms disabled.
14
-
3.1.3 Traffic Overview
15
-
3.1.4 Detailed Statistics
16
-
3.1.5 QoS Statistics
18
-
Show the transmit power of SFP module.
21
-
Rate Limiter ID:
23
-
1. Click Configuration, ACL, then Configuration
24
-
IPv4: The ACE will match all IPv4 frames.
25
-
Specify the source MAC filter for this ACE.
26
-
Figure 3-2.4: The ACL Status
27
-
Hash Code Contributors
29
-
3-3.2.3 Port Status
32
-
3. Click “Refresh“ to refresh the LACP Statistics.
33
-
Figure 3-4.6: The STP Bridges status
41
-
The switch port number of the logical STP port.
42
-
Enable the fast leave on the port.
45
-
5. Click Apply to save the setting
47
-
The VLAN ID of the entry.
48
-
Save – Click to save changes.
53
-
Working Querier Version currently.
56
-
Navigating the MLD Group Table
57
-
1. Click Configuration, MVR, Configuration
59
-
3.7.2 Groups Information
60
-
Figure 3-7.3: The MVR Statistics Information
61
-
1. Click LLDP configuration
62
-
LLDP Port Configuration
63
-
Fast start repeat count
66
-
Trailing street suffix - Example: SW.
68
-
3.8.4 LLDP-MED Neighbors
71
-
LLDP-MED Generic Endpoint (Class I):
72
-
3.8.6 Port Statistics
75
-
MAC Table Learning
78
-
MAC Table Columns
79
-
Adding a New VLAN:
81
-
Ethertype for Custom S-ports:
82
-
To configure Private VLAN in the web interface:
88
-
Indicates the MAC address.
91
-
Forced: Force join to Voice VLAN.
96
-
1. Click GVRP configure.
100
-
Controls the default DEI for untagged frames.
103
-
LANCOM GS-2310P/GS-2326(P) User Manual
105
-
Figure 3-14.5: The Port Tag Remarking
110
-
3.14.6 Port DSCP
111
-
Maximum number of support ed DSCP values are 64.
113
-
and DPL value
116
-
Any: The QCE will match all frame type.
117
-
Key configuration are described as below:
118
-
Port: The logical port number for this row.
123
-
Failure Log: Failure loggings counter.
124
-
Select All: Select all hours and weekdays.
125
-
Whether a loop is currently detected on the port.
130
-
The field describe the Trap Event definition.
135
-
2. Select the mode to enable or disable
137
-
4 System Configuration
138
-
4.3.2 Privilege Level
145
-
4. Click Apply.
149
-
The ID (>= 1) of the system log entry.
151
-
Figure 4-6.5: The SNMP Views Configuration
156
-
Mode of IP Source Guard Configuration:
161
-
The logical port for the settings.
162
-
Source MAC address.
163
-
Mode of ARP Inspection Configuration:
164
-
Adding new entry:
165
-
5.3 DHCP Snooping
166
-
Rx and Tx Lease Query:
168
-
Transmit to Server:
170
-
Drop Agent Option:
171
-
Valid values are in the range [1; 255].
174
-
• Single 802.1X
177
-
5.5.2 Switch Status
178
-
• Multi 802.1X
180
-
Clear all entries.
181
-
Figure 5-5.3.3: The RADIUS Configuration
182
-
RADIUS Authentication Server Configuration
183
-
5.7.2 Switch Status
189
-
Time of Addition:
191
-
To upgrade the firmware via the web interface:
197
-
Activate Alternate Image:
198
-
Figure 6-4.1: Export Configuration
201
-
The IP Address of the device to ping.
203
-
The destination IPv6 Address
204
-
Port: Port number.
205
-
A. Glossary of Web-based Management
206
