LCI Solera Classic Awning Manuals

ĔđĊėĆ®đĆĘĘĎĈĜēĎēČ ̵ More information https://www.caravansplus.com.au Rev: 02.03.20 Page 2 CCD-0001361 Introduction The Solera Classic Awning is designed for use on most recreational vehicle units and is available in a variety of sizes to fit even the largest unit. Additional information about this product can be obtained from www.lci1.com/support or by downloading the free myLCI app. The app is available on iTunes for iPhone and iPad and also on Google Play™ for Android™ users. iTunes, iPhone, and iPad are registered trademarks of Apple Inc. Google Play™ and Android™ are trademarks of Google Inc. For information on the assembly or individual components of this product, please visit: https://support.lci1.com/solera-classic-awning . NOTE: Images used in this document are for reference only when assembling, installing and/or operating this product. Actual appearance of provided and/or purchased parts and assemblies may differ. Table of Contents Introduction 2 Safety 3 Operation 3 Extending the Awning 3 Optional Car Port Position 4 Retracting the Awning 4 Fabric Replacement 4 Fabric Removal 4 Installing Replacement Fabric 6 Maintenance - Solera Awnings 9 Fabric Care 9 More information https://www.caravansplus.com.au Rev: 02.03.20 Page 3 CCD-0001361 The “WARNING” symbol above is a sign that a procedure has a safety risk involved and may cause death or serious personal injury if not performed safely and within the parameters set forth in this manual. Failure to follow the instructions provided in this manual may result in death, serious injury, unit damage, or voiding of the component warranty. The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury and/or product or property damage if not safely adhered to and within the parameters set forth in this manual. Moving parts can pinch, crush or cut. Keep clear and use caution. Safety Read and understand all instructions before installing or operating this product. Adhere to all safety labels. This manual provides general instructions. Many variables can change the circumstances of the instructions, i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This manual cannot begin to plot out instructions for every possibility, but provides the general instructions, as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the provided instructions may result in death, serious personal injury, severe product and/or property damage, including voiding of the LCI limited warranty. Operation Extending the Awning 1. Make sure the black locking knobs on the mount/rafter arm upper channel (channel #3) (Fig. 1) are loosened and pinch the travel locks together to release the outer arm from the mount/rafter arm. 2. Flip the cam lock down to the roll out position. 3. Using the pull rod, start pulling the awning outward until full extension is complete. 4. Slide the mount/rafter arms all the way to the top of the outer arm and make sure they lock into place. Fig. 1 Channel 1 Channel 2 Locking Knob Channel 4 Channel 3 More information https://www.caravansplus.com.au