LCN Benchmark III 9140 Manuals

Installation Instructions 740158-00 Benchmark® III Swing Operator Models: 9130, 9140, & 9150 121 West Railroad Avenue Princeton, IL 61356-0100 800-526-2400 FAX: 800-248-1460 www.lcn.ingersollrand.com 740158-00(1) © 2008 Ingersoll-Rand Company Limited

*740158* 740158 General The Benchmark is an automatic electromechanical swinging door operator for use on hinged, center pivoted and offset pivoted doors. When activated, the Benchmark drives the door to full open position, then electrical power is turned off and the door is closed by spring force. The activating circuit opens the door from any position in the closing swing. During a power failure, the Benchmark acts as a manual door closer (Size 3). Door opening and closing cycles, including opening speed, back check speed, hold open time delay, closing speed, and latch position, are adjustable. Warning Always disconnect main power to the operator prior to servicing or cleaning. Caution This operator is for indoor use only. Do not mount any accessories directly to the operator. Replacement Parts & System Components Part 27” Header Full Length Header Single Full Length Header Double Premium Control Box 9130-3462SC 9140-3462SC 9130-3462SC 9140-3462SC 9150-3462SC Gear Box 9130-3454S 9140-3554S 9130-3454 9140-3454 9150-3454S End Caps 9130-334 9140-334 9150-334 Part Pull Standard Push Extended Reveal Push Finish Arm Assembly 9130-3077T 9140-3077 9150-3077 9140-3077L 9150-3077L US28 DC13 Table of Contents General......................................................................................................................................................................................................1 Replacement Parts & System Components..............................................................................................................................................1 Replacement Parts & System Components (Cont.)..................................................................................................................................2 1 Pre-Installation Site & Product Check....................................................................................................................................................3 2 Operator Installation...............................................................................................................................................................................4 3 Wiring.....................................................................................................................................................................................................7 4 Arm & Cover Installation.........................................................................................................................................................................7 5 Operational Check..................................................................................................................................................................................9 6 Operator Adjustment.............................................................................................................................................................................10 7 Release for Service..............................................................................................................................................................................11 8 Benchmark III Software........................................................................................................................................................................11 Swing Operator Models 9130, 9140 & 9150 Benchmark III Installation Instructions