LEGRAND tynetec ZXT823 Manuals

Tynetec, a business unit of Legrand Electric Ltd Cowley Road, Blyth Riverside Business Park, Blyth, Northumberland, NE24 5TF. Tel: +44 (0) 1670 352371 www.tynetec.co.uk Trusted Technology Caring for People Bogus Caller Alarm 869MHz Caring for People _________________________________________________________________________ ________________________________________________________________ Doc No. FM0837 V1.01 Page 1 • Manually activated fixed trigger device • Used to support the care of clients in their home • Compatible with Reach IP & Carer Response • Single gang momentary action push button • Supplied with single gang surface backbox • Discreet – looks like a light switch • 5 Year Lithium battery (typical) • Low battery warning • Operating Temperature: +5oC to +40oC • Telecare Transceiver: 869.2125MHz Class 1.5 • Digital Heartbeat • Weight: 200 grams • Dimensions: 87mm x 87mm x 40mm (HxWxD) • Product Code: ZXT823 Positioning The bogus caller alarm button should be wall mounted in the hallway alongside the front door or anywhere it can be pressed discreetly if the resident feels threatened or uneasy with a visitor. Alarm Condition The bogus caller button will initiate a silent dial alarm call on the Reach IP unit with speech opened in “listen mode” only. This allows the ARC operator to listen-in and assess the situation before taking appropriate action. A standard trigger alarm will be initiated on a Carer Response. Low Battery Condition A low battery condition will be reported automatically to the Alarm Receiving Centre (ARC). The bogus caller alarm should be replaced as soon as possible within 30 days. The bogus caller alarm can be returned to Tynetec for battery replacement. Out of Range Notification The Reach IP can monitor all radio peripheral devices to determine whether they have been damaged or removed from an installation. Should the Reach IP be unable to detect a device’s heartbeat it will automatically generate a “radio out of range” notification. Firstly, investigate if there’s a genuine reason for the alert, if not, arrange for the peripheral device to be replaced immediately. The “Radio out of range timer” can be set from 30 hours to 99999 hours in Pulse CMP. “Radio supervision” can be disabled by unchecking the tick box associated with each peripheral device in Pulse CMP. Maintenance Test the bogus caller alarm once every month. Clean with a damp cloth, do not use solvents or cleaners on the switch plate. Disposal Waste electrical products should not be disposed of with normal household waste. The bogus caller alarm is ideally suited for disposal within the waste electronic and electrical equipment (WEEE) recycling scheme. Please recycle where facilities exist. Check with your local authority or contact your supplier for recycling/disposal advice. Warning The bogus caller alarm contains a Lithium battery. If tampered with the battery may be damaged and create a fire hazard. No attempt should be made to remove or replace the battery. Do not incinerate.