LEGRAND Wattstopper Manuals

Wattstopper ® DLM - Ultrasonic Ceiling Mount Occupancy Sensor DLM - Ultrasons Montage au Plafond Détecteur de Présence DLM - Sensor de Ocupación Ultrasónico y Montaje en Techo Installation Instructions • Instructions d’Installation • Instrucciones de Instalación No: 24618 – 09/17 rev. 2 Catalog Number • Numéro de Catalogue • Número de Catálogo: Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China This unit is pre-set for Plug n’ Go™ operation, adjustment is optional. For full operational details, adjustment and more features of the product, see the DLM System Installation Guide provided with Wattstopper room controllers, and also available at www.legrand.us/wattstopper. Installation shall be in accordance with all applicable regulations, local and NEC codes. Wire connections shall be rated suitable for the wire size (lead and building wiring) employed. For Class 2 DLM devices and device wiring: To be connected to a Class 2 power source only. Do not reclassify and install as Class 1, or Power and Lighting Wiring. Cet appareil est préréglé pour un fonctionnement Plug n’ GoMC et son réglage est optionnel. Pour connaître tous les détails opérationnels, les réglages et les fonctions supplémentaires du produit, consulter le guide d’installation du système DLM fourni avec Wattstopper contrôleurs de pièce et aussi disponible au www.legrand.us/ wattstopper. L’installation doit être effectuée conformément à tous les règlements ainsi qu’aux codes locaux et de la NEC en vigueur. Les raccordements de fils doivent être classés comme pouvant convenir au calibre du fil (fil de sortie et de bâtiment) utilisé. Pour les dispositifs DLM de classe 2 et le câblage du dispositif: Doit être connecté à une source d’alimentation de classe 2 seulement. Ne pas reclasser et installer en tant que classe 1 ou en tant que fil d’alimentation ou d’éclairage. Esta unidad está preconfigurada para el funcionamiento Plug n’ Go™; el ajuste es opcional. Para obtener detalles de funcionamiento, ajustes y más funciones del producto, consulte la Guía de instalación del sistema DLM que se proporciona con los controladores de habitación Wattstopper; también está disponible en www.legrand.us/wattstopper. La instalación debe realizarse conforme con todas las reglamentaciones aplicables, las normas locales y los Códigos NEC. Las conexiones de los conductores serán aptas para el tamaño de conductor utilizado (cableado de conducción y de construcción). Para dispositivos DLM y cableado de dispositivos Clase 2: Para conexión únicamente a fuente de alimentación Clase 2. No reclasifique ni instale como Clase 1, ni con circuitos de alimentación e iluminación. SPECIFICATIONS Voltage.......................................................................................24VDC Current Consumption................................................................... 20mA Power Supply..........................................Wattstopper Room Controller Connection to the DLM Local Network.............................2 RJ-45 ports DLM Local Network characteristics when using LMRC‑11x/2xx room controllers: Low voltage power provided over Cat 5e cable (LMRJ); max current 800mA. Supports up to 64 load addresses, 48 communicating devices, including up to 4 LMRC‑10x series and/or LMPL‑101 controllers. Free topology up to 1,000’ max. Environment.......................................................... For Indoor Use Only Operating Temperature..........................32° to 131°F (0° to 55°C) Storage Temperature........................... 23° to 176°F (-5° to 80°C) Relative Humidity............................... 5 to 95% (non condensing) Patent Pending CARACTÉRISTIQUES Tension :.....................................................................................24 VCC Consommation de courant :......................................................... 20 mA Alimentation électrique :......................Contrôleur de pièce Wattstopper Raccordement au réseau DLM local :...............................2 ports RJ-45 Caractéristiques du réseau DLM local.................................................... Alimentation basse tension via un câble de catégorie 5 (LMRJ). Prise en charge de 24 périphériques de communication comprenant 4 LMRC‑10x ou LMPL-101 max sur chaque réseau DLM local. Une topologie libre supportant jusqu’à 305 m (1 000 pi) le câble basse tension. Environnement..................Pour une utilisation en intérieur uniquement Température de fonctionnement............... 0 à 55 °C (32 à 131 °F) Température de stockage......................... -5 à 80 °C (23 à 176 °F) Humidité relative.............................5 à 95 % (sans condensation) Brevets en attente ESPECIFICACIONES Voltaje:.......................................................................................24 VCC Consumo de corriente:................................................................ 20 mA Suministro de energía:......... Controladores de habitación Wattstopper Conexión a la red local DLM........................................2 puertos RJ-45 Características de red local DLM: El bajo voltaje se suministra por un cable Cat 5e (LMRJ); corriente máxima de 800 mA. Admite hasta 64 direcciones de carga, 48 dispositivos de comunicación, lo que incluye hasta 4 controladores de la serie LMRC-10x y LMPL-101. Topología libre de hasta 1000 pies de cable de bajo voltaje. Entorno........................................................Solo para uso en interiores Temperatura de funcionamiento..............0° a 55°C (32° a 131°F) Temperatura de almacenamiento.......... -5° a 80°C (23° a 176°F) Humedad relativa.............................5 a 95 % (sin condensación) Patente en trámite

Wattstopper ® 360° Dual Technology • Line Voltage Occupancy Sensor (version 3) with Light Level feature Double technologie à 360° • Détecteur de mouvement de tension de ligne (v3) avec les fonctionnalités de niveau de luminosité Doble tecnología de 360° • Sensor de ocupación de voltaje de línea (v3) con nivel de luz Installation Instructions • Instructions d’Installation • Instrucciones de Instalación No: 24038 – 02/17 rev. 2 Catalog Number • Numéro de Catalogue • Número de Catálogo: DT-355 Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China DT-355-U is BAA and TAA compliant (Product produced in the U.S.) UNIT DESCRIPTION The Wattstopper DT-355 360° Dual Technology occupancy sensors combine advanced passive infrared (PIR) and ultrasonic technologies into one unit. The combination of these technologies helps to eliminate false triggering problems even in difficult applications. The DT-355 turns lighting systems on and off based on occupancy and ambient light levels. The light level feature can be used to keep lights from turning on if the ambient light level is sufficient. The DT-355 offers numerous operating modes that can be combined to create the ideal custom control. The sensors can be configured to turn lighting on, and hold it on as long as either or both technologies detect occupancy. After no movement is detected for the user- specified time the lights are switched off. A “walk-through” mode can turn lights off after only 3 minutes, if no activity is detected after 30 seconds of an occupancy detection. The DT-355 operates on 120VAC, 230VAC (1Ø), 277VAC, or 347VAC line voltage. PLACEMENT GUIDELINES Depending upon obstacles such as furniture or room layout, the area of coverage may be less or more than the sensing distances shown in the coverage pattern. This must be considered when planning the number of sensors and their placement. It is also recommended to place the sensor at least 4 to 6 feet away from air supply vents. Mount the sensor to the ceiling. The DT-355 is designed for a ceiling heights of about 8-12 feet. Mounting above or below this range will significantly affect the coverage patterns. As a general rule, each occupant should be able to clearly view the sensor. Masking the PIR Lens: Opaque adhesive tape is supplied so that sections of the PIR lens can be masked. This restricts the sensor’s view and allows you to eliminate PIR coverage in unwanted areas such as hallways outside of the desired coverage area. Since masking removes bands of coverage, remember to take this into account when troubleshooting coverage problems. The Ultrasonic coverage cannot be masked, but you can adjust its sensitivity to reduce the coverage area. SPECIFICATIONS Voltages ....................................................................120//230/277/347VAC, 50/60Hz Load Requirements @120VAC ..........................................................0-800W Ballast/Tungsten/LED @230VAC (Single Phase) ................................................0-1200W Ballast/LED @277VAC ........................................................................0-1200W Ballast/LED @347VAC ........................................................................0-1500W Ballast/LED Operating Temperature ...................................................... 32° to 131°F (0° to 55°C) Terminal Torque Rating ........................................... 4.428 inch pound-force (0.5Nm) Ballast Operating Temperature ........................................... 32° to 131°F (0° to 55°C) Light Level One-Step Adjustment ..........................................................10FC–300FC Time Delay Adjustment ..................................................... 30 seconds to 30 minutes Walk-Through Mode ............................................3 minutes if no activity after 30 sec Test Mode ......................................................................5 sec. upon DIP switch reset PIR Coverage (Typical) ................................................................................. 1300 ft2 Sensitivity Adjustment .............................................High or Low (DIP switch setting) Ultrasonic Coverage (Typical) ....................................................................... 1300 ft2 Sensitivity Adjustment .............................................................. Min. to Max. (trimpot) Frequency ........................................................................................................40kHz 36' 36' 20% Ultrasonic Overlap Ultrasonic Coverage 36 ft (10.97m) PIR Coverage 36 ft (10.97m) Sensor 20% Ultrasonic Overlap If the space is larger than 30’ x 30’ it will be necessary to use more than one sensor to ensure complete coverage.

Wattstopper ® Low Voltage Outdoor Motion Sensor Installation Instructions • Instructions d’Installation • Instrucciones de Instalación No: 24260 – 09/16 rev. 1 Catalog Number • Numéro de Catalogue • Número de Catálogo: EW-205-24 Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China SPECIFICATIONS Voltage: EW-205-24 ............................................................................. +24VDC Current Consumption ....................................................................7mA Power Supply ........................Wattstopper Power Pack or DM-105 module B Series power packs supply power for up to 11 sensors. BZ Series power packs supply power for up to 15 sensors. DM-105 HID Bi-Level control module supplies power for up to two sensors. DM-115-WP Outdoor HID Bi-Level control module supplies power for up to two sensors. Coverage ..............................................................................................270° Time Delay Adjustment ........................................................12sec.–16min. Light Level Adjustment ......................................................... 0.5FC–200FC Operating Temperature ...................................-40° to 130°F (-40° to 55°C) Mountable Locations .............................. Pole, wall, ceiling or under eaves IEC-IP-55 Raintight Rated U.S.Patents: 4,787,722; 5,640,113 UNIT DESCRIPTION The EW-205 sensor is an outdoor passive infrared (PIR) motion sensor rated for wet conditions. It installs onto a standard round outdoor junction box using the supplied junction box cover plate. The EW-205 sensor uses advanced PIR technology and a superior lens design to detect motion. PIR sensing is passive, and detects the difference between infrared energy in motion and the background space. The EW-205 sensor provides a +24VDC control output upon motion detection. This output can be connected to a WattStopper power pack for on/off lighting control, or to a WattStopper DM-105 or DM-115-WP Outdoor HID Bi-Level control module for high/low control. COVERAGE PATTERN Coverage is shown as tested in a controlled setting with the unit mounted at 8 ft at a 10° tilt from the horizontal surface. The actual outside coverage pattern may vary substantially at the specific installation site and is dependent on several factors including weather conditions, external light sources, mounting height and sensor tilt. ����� ����� � ������ ������� ������ ���� ����������� ����������� ����� �������� ���� Box Contents • One (1) EW-205-24 • Accessory bag: Cover plate for 4” round outdoor junction box, with two cover plate attachment hole plugs, cover plate gasket, cover plate screws & screw covers (4 ea), lens mask, wire nuts (3) • Installation instructions Please read all of the installation instructions before installing this product. Coverage adjustment: The front of the sensor housing can be moved up and down for easy coverage adjustment.

1 No: IS-00708 Rev. B Wattstopper ® Architectural Dimming Equinox 73 LCD Touchscreen French Description Spanish Description Installation Instructions • Instructions d’Installation • Instrucciones de Instalación No: IS-00708 – rev. B EQ73-LCAP • Les Numéros de Catalogue • Los Números de Catálogo: Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China FEATURES AND OPERATION OVERVIEW OVERVIEW Legrand’s Equinox 73-LCAP active matrix LCD touchscreen continues Legrand’s commitment to LCD in-wall control centers. The Equinox 73-LCAP LCD interface is a dedicated system portal to whole system control. The 7” touchscreen displays media rich widgets in a dashboard layout. Each widget’s content has been carefully designed to provide the ultimate user experience. Legrand’s Equinox 73-LCAP system uses self discovering technology, eliminating countless hours of tedious programming. Navigate and control, with real time feedback, lighting, shades, timers, scenes, and more through a single layer navigation experience. • Widescreen orientation only • Equinox platform provides built-in widgets using Legrand proprietary auto discovery methods for fast automatic screen design • Equinox 73-LCAP fully incorporates Legrand’s consistent user experience interface, eliminating learning curves normally associated with switching between interface devices • Powered over PoE*/PoE+ Ethernet - *PoE optional Ethernet 4 Port PoE Injector part number DA2400 or COM-POE-SWITCH • Communicates over Ethernet Bus (InFusion controller and Equinox should be connected to the same local network) • Firmware upgradeable from Design Center over Ethernet • Built-in ambient light sensor for “active,” AUTO mode screen brightness and off when dark option when “inactive” • Inactive mode dims or turns screen off in 1 minute if no activity • Built-in proximity activation, 6” maximum, sets screen to active brightness when approached • Dual operation mechanical buttons, bottom left and right; - Left navigates to default widget - Right may be programmed with a task from Design Center • Equinox 73-LCAP uses the same widgets as Android tablets and phones, and iPads®, iPhones, and iPods • Three types of users are supported on the system. Using a variety of users you can limit what is available to specific individuals as well as limit permissions. - Administrators - All permissions and visibility into the system. Only one system-wide administrator can be assigned whose password is set up at system startup. The admin password can be created or changed from within EQ view. It is not dependent on the first time initialization screen. - Managed Users - A password protected user who can have a wide variety of permissions granted to them, including the creation of other users. There is no limit to the number of managed users. - Guest Users - Recommended to be the default user on all screens in public areas, guest users cannot make any changes to the system and have no permissions to set. They cannot be password protected. • Top of screen displays: - Administrator/user details - Access help topics - Manage settings including appearance, access/permissions, areas and rooms, devices, events, groups, repair, schedules, scenes, and systems • Main screen automatically displays widgets (order may be changed in user/settings directly from the app) including shades, lighting, home, scenes, and divide/combine • Raise/lower dimmable loads with graphical icons and text track color load status Project

Wattstopper ® DLM Wireless IR Shade Configuration Tool Outil de commande IR sans fil DLM pour stores Herramienta de puesta en servicio inalámbrica por infrarrojos DLM para stores Quick Start Guide • Guide de démarrage rapide • Guía de inicio rápido No: 29434 – 04/21 rev. 2 Catalog Number • Numéro de Catalogue • Número de Catálogo: LMSH-CR Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China BATTERIES The LMSH-CR operates on three standard 1.5V AAA Alkaline batteries or three rechargeable AAA NiMH batteries. The battery status displays in the upper right corner of the display. Three bars next to BAT= indicates a full battery charge. A warning appears on the display when the battery level falls below a minimum acceptable level. To conserve battery power, the LMSH-CR automatically shuts off 10 minutes after the last key press. DESCRIPTION AND OPERATION The LMSH-CR Shade Configuration Tool is a handheld tool for setup and testing of Legrand Shading Digital Lighting Management (DLM) based shading devices. It provides wireless access to shade motors, switches, and shade controllers for setup and parameter changes outside of the automatic Plug and Go (PnG) process for initial shade room setup. The LMSH-CR displays menus and prompts to lead you through each process. The navigation pad provides a familiar way to navigate through the customization fields. The LMSH-CR allows modification of the system without requiring ladders or tools and can be done simply with a touch of a few buttons. Upon initial shade room start-up, PnG will automatically configure all connected shade motors to all installed switches for default operation depending on the type of shade fabric and the type of installed switches. During testing, the factory will assign a value in the shade motor indicating the opacity of the installed shade fabric. This will be used to determine the shade button assignments. The PnG will also set a default shade upper and lower limit which can be adjusted using the Pull and Save (PnS) procedure (see installation instructions). Lastly, all shades are assigned to all shade switch button upon start-up. By using the Push n’ Learn (PnL) process (see installation instructions), installer can assign individual buttons to control one or more specific shades. The functions setup by the PnS and PnL processes can also be done using the LMSH-CR. The LMSH-CR’s IR transceiver allows bidirectional communication between DLM-based shade devices and the LMSH-CR. Simple menu screens allow you to view the current status of the system and make changes. The LMSH-CR can change motor parameters like roll direction, shade speed, and any of the shade upper and lower limits. It can also change shade groupings, switch assignments, and shade switch functionality. For a detailed explanation of all the screens in the LMSH-CR, see the LMSH-CR User Guide, which can be downloaded from the Legrand Commercial Shading website. The LMSH-CR has a micro-USB port (found in the battery compartment when you remove the battery cover). This port is used to update the firmware in the LMSH-CR, when updates are made available. Details on updating can be found in the LMSH-CR User Guide. NAVIGATION You navigate from one field to another using  (up) or  (down) arrow keys. The active field is indicated by flashing (alternates between yellow text on black background and black text on yellow background). Once active, use the Select button to move to a menu or function within the active field. Value fields are used to adjust parameter settings. They are shown in “less-than/greater- than” symbols: . Once active, change them using  (left) and (right) arrow keys. The  left key decrements and the  right key increments a value. Selections wrap-around if you continue to press the key beyond maximum or minimum values. Moving away from the value field (using / keys) overwrites the original value. The (Home) button takes you to the main menu. The (Back) button can be thought of as an undo function. It takes you back one screen. Changes that were in process prior to pressing the button are lost. Home Menu The Home (or Main) menu displays after the powerup process completes. It contains information on the battery status and six menu choices. Press up/down buttons to locate the desired function then press Select. Shade Config (PnS) MCA Config Button Config Utilities Home/ Main Menu Up Select Down Right/Next Left Back Power On/Off IR Window BAT= More

Wattstopper ® Wireless DLM Border Router Installation Instructions • Instructions d’Installation • Instrucciones de Instalación No: 26814 – 04/20 rev. r6 Catalog Number • Numéro de Catalogue • Número de Catálogo: LMBR-650 Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China Not included: • LMRJ cable connection between power adapter cable and LMPB-100 • CAT5e network cable for connection to LAN, DLM Management software, and other BACnet devices If the site will only have a single LMBR-650, it should be mounted as described below. If there are multiple LMBR-650s, one of them will be designated as the Primary LMBR and all others will be Secondary LMBRs. It is Wattstopper best practice that the Primary LMBR be used only for communication with other LMBRs and not have any wireless devices assigned to its network. Therefore, the Primary LMBR will often be mounted in a network enclosure and will only communicate via ethernet cable and not with its wireless radio. A single (or secondary) LMBR-650 is intended to be mounted in a central location for optimal communication with wireless devices. It is rated for installation in plenum or non-plenum ceiling spaces. The LMBR-650 should be mounted to a vertical surface, using the included T-shaped bracket, for optimum efficiency of wireless transmission/reception. For projects designed by Wattstopper services, check the drawing for optimal border router placement. Wattstopper recommends a minimum of 10’ between the LMBR-650 and another LMBR- 650 or any wireless bridges or wireless room controllers. 1. Using T-shaped mounting bracket, locate a suitable vertical surface to mount the T-shaped bracket with the two screw holes facing down (T upside down orientation as shown). Use provided self tapping screws to mount the T-adapter. 2. Once T-adapter is secure, locate the mounting holes on back side of border router and T-shaped adapter. With the border router network connections facing upward align the border router over the mounting pegs and slide down to lock into place. NOTE: A single LMBR-650 or a secondary LMBR-650 in a multi-LMBR network should not be installed in an enclosure. A primary LMBR-650 can be installed in a network enclosure, since it will communicate via ethernet cable. SPECIFICATIONS Power Either.....................IRB powered using dedicated LMPB-100 ..............(included) with DC barrel-to-RJ-45 connector cable Or................optional 120VAC plug-in power supply (NB-PS) Current Consumption.......................................... 65mA @24VDC Wireless.....................................................IEEE 802.15.4, 2.4gHZ .......IPv6 Mesh (6LoWPAN / 802.15.4 / 2.4GHz), range 100 ft. .....................................................Available Channels: 13-24 ....................Built-in Antennas: Two IPv6 Mesh with diversity ..................................................... Bandwidth: up to 156kbps Wireless Encryption AES-128 bit symmetric key Connections......... RJ45 10/100 Ethernet, 1 DC Barrel Connector Storage....................................................... Internal MicroSD Card Time ..................... Real-time clock with supercap 14 day back-up Device Capacity................... up to 50 REED/Routing devices and ....................................................................250 total devices 1 Primary LMBR-650 can support up to 10 Secondary LMBR-650’s LEDs......................................................power and network status Environment....................................................For indoor use only Operating Temp.....................................32 to 131F(0 to 55C) Storage Temp ..................................... 23 to 176F(-5 to 80C) Relative Humidity ........................... 5–95% Non-condensing Compliance/Regulatory UL 2043 Plenum Rated, UL/C-UL (E101196), FCC, RoHS DESCRIPTION The wireless border router manages the formation and configuration of the 6LoWPAN wireless network and provides network connectivity via wired Ethernet to a local area network (LAN). Wireless REED (powered)/ Routing devices connect to the border router to establish mesh routing paths. The border router also provides key information about the health of the mesh network in the form of signal quality, device status, network status, and other real-time network information such as energy monitoring. The border router allows cloud connectivity, which can be used to update firmware in all connected wireless devices, as well the LMBR-650 itself. MOUNTING AND INSTALLATION Each border router ships with the following components: • LMBR-650 border router • LMPB-100 Power Supply • DC power adapter cable, DC barrel to RJ45 jack • T-shaped mounting bracket • Self tapping screws x 3 • Cable tie