Lenovo ThinkSystem SN550 7X16 Manuals

Lenovo ThinkSystem SN550 Compute Node Type 7X16 Quick Start PN: SP47A10544 Printed in China In the box  SN550 Compute Node  Printed documentation If any item is missing or damaged, contact your place of purchase. Ensure that you retain your proof of purchase. They might be required to receive warranty service. First glance Front view: Two 2.5-inch hot-swap HDD or SSD compute node model USB 3.0 connector Power button/LED (green) KVM connector Identification LED Drive activity LED (green) Fault LED (yellow) Drive status LED (yellow) USB management button Setting up the system 1. Install the required compute node components. 2. Install the compute node into the chassis. 3. Make sure the chassis is connected to power. 4. Connect the management controller to the network. 5. Power on the compute node. 6. Configure the system. For detailed information about installing hardware options and configuring the system, see the following website: http://thinksystem.lenovofiles.com/help/topic/7X16/introduction.html