LG-Ericsson iPECS LDP-9030D Manuals

Your Communications Solution LDP-9030D Button Layout 11. Speaker 10. Volume Call Forwarding Ericsson-LG iPECS LDP-9030D Handset User Guide 1. LCD Screen: phone interface for status, dialing directories, and message information. 2. Soft Buttons: these buttons are interactive and have a changing function based on the phone’s status 3. Flex Buttons: a line or feature can be assigned to these buttons. 4. Page: scroll through the soft button functions on the LCD screen 5. Transfer: transfer the current active call or access the PGM (program) menu while the phone is idle. 6. Speed: assign or use assigned speed dial numbers. 7. DND (Do-Not-Disturb): blocks incoming calls. You can also activate Do-Not-Disturb while the phone is ringing. 8. Call back: initiate a call back request to a busy station. Once that station becomes idle, the initiating station is signaled. 9. Mute: mute the call so that the caller cannot hear your voice. 10. Volume control: adjust the Ring, Headset, Handset, and Speaker volume. 11. Speakerphone: toggle the speakerphone On and Off during a call. The button will automatically illuminate when the phone is in menu mode. 12. Hold/Save: place a call on hold or use to save information when programming. 5. 6. 7. 8. 9. Button Guide } 3. Flexible (‘Flex’) buttons 1. LCD Screen 12. Hold/Save 2. Soft Buttons 4. 4. Dealing with calls Answering an Incoming Call Lift the handset and press the flashing flex button (as needed) Making an External Call Press a free Loop/Line flex button or the 9 button to pick up an outside line. Once you have the outside line, dial your number. Making an Internal Call Lift the handset. Dial the extension number or press the flex button assigned to the contact. Rejecting a Call Press the DND button when a call comes in - the caller will get a fast busy tone. Call Pick Up Lift the handset and dial ** to pick up any handset in your group, if it is not in your group dial 7 and then the intercom number of the ringing handset. Placing a call on hold Press the Hold/Save button. To reconnect the call, press the green flashing Loop/Line flex button.