Lika LD350 Manuals

User's guide LD350 LD355 • Multifunction touch-screen display for incremental encoders • Speed and position indicator, frequency counter, process meter, timer, stopwatch, ... • Input frequencies up to 1MHz • Digital, analogue, serial and relay outputs • DC / AC power supply: 18÷30Vdc or 115÷230Vac Suitable for the following models: • LD350/LD355 touch-screen display • LD350/LD355-PM touch-screen display with 115/230Vac power supply • LD350/LD355-DO touch-screen display with four control outputs + RS-232 serial interface • LD350/LD355-AVI touch-screen display with analogue output + four control outputs + RS-232 serial interface • LD350/LD355-RO touch-screen display with two relay outputs General Contents Preliminary information 10 1 - Safety summary 12 2 - Identification 14 3 - Mounting instructions 15 4 - Electrical connections 17 5 - Display and touch screen 26 6 – Menus and parameters 28 7 - Appendix 74 8 - Parameters / serial codes 75 Lika Electronic • Tel. +39 0445 806600 • [email protected] • www.lika.biz Smart encoders & actuators

3039 POSICONTROL Multifunction display for incremental encoders Series LD350 • LD355 Complete documentation available for download at www.lika.biz Warning: devices having order code ending with "/Sxxx" may have mechanical and electrical characteristics different from standard and be supplied with additional documentation for special connections (Technical Info). Attenzione: i dispositivi con codice di ordinazione finale “/Sxxx” possono avere caratteristiche meccaniche ed elettriche diverse dallo standard ed essere provvisti di documentazione aggiuntiva per cablaggi speciali (Technical info). Achtung: Geräte, deren Bestellschlüssel mit der Kennung /Sxxx enden, können in ihren mech. und elektr. Eigenschaften vom Standard abweichen. Diese werden daher mit einer ergänzenden Dokumentation ausgeliefert (Technical info). Atención: los dispositivos con código de pedido acabado en "/Sxxx" pueden tener características mecánicas y eléctricas diferentes a las básicas y documentación adicional relativa a conexiones especiales (Technical Info). Attention: les dispositifs avec code de commande terminant en “/Sxxx” peuvent avoir des caractéristiques mécaniques et électriques différentes du standard et documentation additionnelle pour les câblages spéciaux (Technical info). EN Mounting instructions IT Istruzioni di montaggio DE Montagehinweise Insert the display without fixing clips through the cut-out (about 91 W x 43 H mm); install the fixing clips in the side of the display and then tighten the two screws in the clips against the panel frame. Inserire il display nel foro (ca. 91 L x 43 H mm) ricavato nel pannello senza le staffette di fissaggio; installare le staffette sul lato della custodia e avvitare le due viti sulle staffette fino a portarle in battuta contro il pannello. Anzeige in einen Ausschnitt (91 x 43 mm) auf der Schalttafel ohne Befestigungs-Halter einschieben; Das Gerät wird über die Halter (zwei Schrauben) festgeschraubt. ES Instrucciones de montaje FR Instructions de montage Insertar el visualizador sin soportes de fijación en el recorte (aprox. 91 L x 43 A mm) hecho en el cuadro eléctrico; montar los soportes en la parte lateral de la carcasa del visualizador y apretar los dos tornillos firmemente contra el cuadro eléctrico. Insérer l’afficheur sans supports de fixation à travers la découpe (environ 91 L x 43 H mm) de l'armoire électrique ; installer les supports de fixation aux côtés de l'afficheur et serrer les deux vis de fixation fermement jusqu'à ce qu'ils soient en butée. Electrical connections (terminal blocks) 1 0Vdc DC power supply (PM/P8) 17 RS-232 / RS-485 serial interface (RxD / B) 2 +18Vdc +30Vdc DC power supply (PM/P8) 18 RS-232 / RS-485 serial interface (TxD / A) 3 0Vdc auxiliary voltage output 19 Control outputs 5 ... 30V switching voltage 4 +18Vdc +30Vdc or +5Vdc (Vdc supply) / +24Vdc or +5Vdc (Vac supply) auxiliary voltage output 20 PNP control output 1 21 PNP control output 2 5 Input A 22 PNP control output 3 6 Input /A (LD355 only) 23 PNP control output 4 7 Input B 24 +115Vac ... +230Vac AC power supply (PM) 8 Input /B (LD355 only) 25 0V AC power supply (PM) For the suggested wiring of the incremental inputs refer to the “User's guide”. The allowed inputs are: PNP, NPN, Namur, Tristate, RS-422, HTL differential, HTL PNP single ended, and HTL NPN single ended. 9 0Vdc HTL PNP control inputs 26 Not used 10 HTL PNP control input 1 27 Relay output 1 (CO Change-over contact) 11 HTL PNP control input 2 28 Relay output 1 (NO Normally-open contact) 12 HTL PNP control input 3 29 Relay output 1 (NC Normally-closed contact) LD350 model = AB inputs LD355 model = AB /AB inputs 13 0Vdc analogue outputs 30 Relay output 2 (CO Change-over contact) 14 Current analogue output 31 Relay output 2 (NO Normally-open contact) 15 Voltage analogue output 32 Relay output 2 (NC Normally-closed contact) 16 0Vdc RS-232 / RS-485