Lindy 38250 Manuals

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - SECOND EDITION (March 2016) Modular Matrix Range User Manual English No. 38250, 38251, 38252, 38253, 38254, 38255, 38256, 38257, 38258, 38259 www.lindy.com Tested to Comply with FCC Standards For Home and Office Use! User Manual English Introduction Thank you for purchasing from the LINDY Modular Matrix range of products. This range of products is designed to allow you to create a matrix with 8, 16 or 32 input and output ports. The input ports can be a choice of C6 HDBaseT, HDMI, DVI or VGA while the output ports can be HDMI, DVI or C6 HDBaseT. Any of the inputs can be combined with any of the outputs to create a UHD 4Kx2K@30Hz display over distances of up to 70m and 1080p up to 100m. The modular design provides the ultimate in flexibility for audio and video distribution as a matrix, convertor or an extender in retail product demonstration, training and public display application in schools, pubs etc. Package Contents  Modular Matrix (including control board) with spaces for 2, 4 or 8 modular boards  IR Blaster  Blanking plates fitted to the rear of the units  IR Extender  Power Cord (2x for 16 and 32 port Chassis)  Remote control inc battery  User manual  Input boards – choose from C6 HDBaseT, HDMI, DVI-D and VGA  Output boards – choose from HDMI, DVI-D and C6 HDBaseT Features Modular Chassis  Supports HDMI 4K, C6 HDMI Extender 4K, VGA WUXGA and DVI 1080p resolutions  Modular input and output boards can be mixed between multiple interfaces  Supports Audio pass-through on all boards  Supports RS232, Telnet and Web GUI controls  Supports multiple EDID modes  16 & 32 port models have redundant power supplies  Rack Mountable Installation Your modular matrix may need some assembly, before installing the modular boards please ensure you have taken the appropriate steps to avoid static discharge. Assembly should only be attempted by a qualified person and the chassis should not be connected to the power when adding the boards. The boards are not hot pluggable and if further boards are to be added, the unit must be powered down and unplugged. Make sure all your devices are switched off before making any connections. Once all the connections are made, switch on the devices in this order: displays, Matrix, source devices. Operation Front Panel – 8x8 Version 1. Power Button & LED: Press this button to turn the Matrix on, press it again to put it in standby mode. The LED will illuminate red in standby mode. If the LED is flashing then the internal temperature is too high and the Matrix needs ventilation.