Lindy 42341 Manuals

KVM Switch Compact USB 2.0 Audio Installation Guide English Installationsanleitung Deutsch Manuel Utilisateur Français Manuale d’uso Italiano © LINDY – 2nd EDITION (September 2013) No. 42340 – HDMI No. 42341 – DVI-D No. 42342 – VGA No. 42343 – DisplayPort www.LINDY.com For Home and Office Use Tested to Comply with FCC Standards Specification E n g l i s h • USB 2.0 compliant, supports USB 2.0 hubs and device sharing • Port switching via button, software and keyboard hotkey switching • 2 System Cables connected to the switch No. 42340 – Interfaces: HDMI, USB 2.0, Audio out & Microphone HDMI up to 1920x1080, HDCP & 3D compliant, with HDMI Audio No. 42341 – Interfaces: DVI, USB 2.0, Audio out & Microphone DVI-D Single Link: up to 1920x1200, HDCP compliant – not for connec- tion to HDMI ports of graphic cards or PC/notebook, HDMI and Deep Colour are not supported! No. 42342 – Interfaces: VGA, USB 2.0, Audio out & Microphone No. 42343 – Interfaces: DisplayPort, USB 2.0, Audio out & Microphone Installation E n g l i s h 1. Install the software (CD) on a PC “Software Installation for Windows”. To install on Mac OS, copy the file (*.pkg format) to the local hard disk and install it from there. 2. This will install the software on your computer and create some new icons in the Windows taskbar or in the Mac Dock. They will look like one of the icons shown below. 3. No live connection or KVM switch detected Port 1computer is displayed and selected Port 2 computer is displayed and selected 4. Connect your keyboard, mouse, monitor and audio devices to the KVM switch. 5. If required, you may use a USB hub to connect more than 2 USB devices, to do this please use a self powered USB hub. 6. Connect the system cables directly to your computers. Extension or adapter cables may NOT be supported at high video resolutions. Operation & Port Switching E n g l i s h There are three methods to toggle between the computers. After switching please allow the computer a few seconds to load all USB drivers before you can use the system. 1. Switch Button The Switch Button is a wired remote control. Press the button to toggle between the two computers. 2. KVM Switching Software (Windows & Mac OS) For KVM Switching Software please refer to installation section. Right clicking the icon opens the port switching menu. Double clicking the icon opens the configuration menu. Using this menu you may bind the audio ports to one computer and you may en- able the beeper. Windows OS Mac OS Switching Menu Configuration Menu Switching Menu Configuration Menu 3. Keyboard Hotkey Switching (Windows & Mac OS) Each keystroke hotkey sequence must be pressed within two seconds. It is not possible to switch to a port with no active computer attached. For Windows, the following key sequence for switching is preset: “Scroll Lock + Scroll Lock”. Additional hotkeys like "CTRL ALT + *" can be configured via the Configuration menu as described above. For Mac, please define the hotkeys via the Configuration menu as de- scribed above.

© LINDY Group - FOURTH EDITION (February 2021) 2 Port DVI-D / VGA / DP 1.2 / HDMI, USB 2.0 & Audio Cable KVM Switch User Manual English Benutzerhandbuch Deutsch Manuel Utilisateur Français Manuale Italiano No. 42340 2 Port HDMI 10.2, USB 2.0 & Audio KVM Switch 42341 2 Port DVI-D Single Link, USB 2.0 & Audio KVM Switch 42342 2 Port VGA, USB 2.0 & Audio KVM Switch 42344 2 Port DisplayPort 1.2, USB 2.0 & Audio KVM Switch 42345 2 Port HDMI 18G, USB 2.0 & Audio KVM Switch lindy.com

© LINDY Group – THIRD EDITION (October 2018) 2 Port DVI-D / VGA / DisplayPort 1.2 / HDMI 2.0 KVM Switch User Manual English Benutzerhandbuch Deutsch Manuel Utilisateur Français Manuale Italiano No. 42341 2 Port DVI-D Single Link, USB 2.0 & Audio KVM Switch 42342 2 Port VGA, USB 2.0 & Audio KVM Switch 42344 2 Port DisplayPort 1.2, USB 2.0 & Audio KVM Switch 42345 2 Port HDMI 2.0, USB 2.0 & Audio KVM Switch lindy.com Tested to comply with FCC Standards For Home and Office Use!