Living Spaces 305-S362-730 Manuals

Size of Mattress This bed is designed to use a twin mattress 37.5" to 38.5" wide x 74" to 75" long with the total thickness not exceeding 8" for upper bunk and lower bunk. Do not use mattress without the proper slat system and proper attachments described in the instructions. NOTE: there must be at least 5 inches from the top surface of the mattress to top edge of guardrail. 1. Follow the information on the warning appearing on the upper bunk end structure and on the carton. Do not remove warning label from bed. 2. Always use the recommended size mattress or mattress support, or both, to help prevent the likelihood of entrapment or falls. 3. Surface of mattress must be at least 5 inches below the upper edge of the guardrails. 4. Do not allow children under 6 years of age to use the upper bunk. 5. Prohibit more than one person on upper bunk. 6. Periodically check and ensure that the guardrail, ladder,and other components are in their proper position, free from damage, and that all connectors are tight. 7. Do not allow horseplay on or under the bed and prohibit jumping on the bed. 8. Alway use the ladder for entering and leaving the upper bunk. 9. Do not use any substitute parts. Contact manufacturer or dealer for replacement parts. 10. Use of a night light may provide added safety precaution for a child using the upper bunk. 11. If the bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall. 12. Always use guardrails on both long sides of the upper bunk. 1. The use of water or sleep flotation mattress is prohibited. 14. Keep these instructions for future reference. 15. Strangulation Hazard-Never attach or hang items to any part of the bunk bed that are not designed for use with the bed: for example, but not limited to, hooks, belts, and jump ropes. SAFETY WARNING ! Replacement Parts Replacement parts, including additional guardrails, may be obtained from place of purchase or Original distribution Replacement Parts Keep all instruction sheets for future reference to assemble bed for moving and/or different set up. ASSEMBLY INSTRUCTIONS Page 1 of 7 DESCRIPTION: 3/3 BUNK BED MADE IN VIET NAM TOOLS REQUIRED (NOT PROVIDED) PHILLIPS SCREWDRIVER PART LIST 2 PCS Qty. Descriptions Drawing Bed Side Rails (305-S362-732) SLATR-33 2 SET Page 2 of 7 HARDWARE LIST (For 305-S362-730 3/3 Bunk Bed Ends) Qty. No. Descriptions Size Drawing 1 2 M4 1 PC 2 PCS Allen Key Bolt 1/4" x 15 x 9/16" HARDWARE LIST (For 305-S362-731 Bunk Bed Ladder w/Guard Rail) Qty. No. Descriptions Size Drawing Bolt 1/4" x 45 x 1*3/4" 6 PCS 3 D-nut 1/4" x 15 x 9/16" 1 PC 2 M4 2 PCS 4 2 PCS 5 Allen Key Bolt 1/4" x 25 x 1" 1 PC Metal Plate 120 x 25 x 3mm 6 10 PCS Screw M4 x 20mm 7 HARDWARE LIST (For 305-S362-732 Bunk Bed Rails) Qty. No. Descriptions Size Drawing Hanger Bolt 5/16" x 89 x 3 1/2" 16 PCS 8 16 PCS 9 16 PCS 10 Hexagon-nut Lock washer 5/16" Bunk Bed Ends (305-S362-730) Long Guard Rail (305-S362-731) 1 PC Short Guard Rail (305-S362-731) 1 PC Wood Ladder (305-S362-731) 1 PC 4 PCS HARDWARE LIST (For SLATR-33) Qty. No. Descriptions Size Drawing 13 52 PCS Screw M4 x 25mm ASSEMBLY INSTRUCTIONS DESCRIPTION: 3/3 BUNK BED ITEM NO: 305-S362-730 / 731 / 732 / SLATR-33 Thank you for purchasing this quality product. Be sure to check all packing material carefully for small Hardware which may have come loose inside the carton during shipment.Identify and count all Hardware and compare with the Hardware List Below. 1 PC Wrench 11 5/16" 5/16" 4 PCS BunFoot (305-S362-730) 305-S362-732 Bunk Bed Rails 305-S362-730 3/3 Bunk Bed Ends SLATR-33 305-S362-731 3/3 Bunk Bed Ladder W/Guard Rail SLATR-33 305-S362-730 3/3 Bunk Bed Ends 305-S362-731 3/3 Bunk Bed Ladder W/Guard Rail 5/16" x 19mm Flat washer 16 PCS 12 Page 3 of 7 ASSEMBLY INSTRUCTIONS MADE IN VIET NAM STEP 1 DESCRIPTION: 3/3 BUNK BED ITEM NO: 305-S362-730 / 731 / 732 / SLATR-33 ASSEMBLY STEP BUNK BED ENDS