Lorex CVC6996 Series Manuals

QUICK START GUIDE www.lorextechnology.com Lorex Technologies Inc. Copyright © 2010 Lorex Technologies Inc. As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE Cable Extension Options HIGH RESOLUTION INDOOR/OUTDOOR COLOR CAMERA with Night Vision Problem Solution No Picture/Signal • Ensure your TV is on the correct input channel. Common terms of an input channel: INPUT, AV CHANNEL, LINE1, LINE2, AUX. • If your camera is connected to a VCR/DVR, ensure it is properly connected to your TV/ Monitor. • Ensure connections are properly connected. • Ensure all the camera power supply is plugged in. Picture is too bright • Ensure your camera isn’t pointed directly at a source of light (e.g sun or spot light). • Slide the sunshade (bullet cameras only) forward to block excess light. • Move your camera to a different location. Picture is too dark • If using during the day, the camera may not be getting enough light. Slide the sunshade backwards to let in more light. Check the brightness and contrast settings of the device your camera connects to (TV/Monitor/DVR). Night Vision is not working • The night vision activates when light levels drop. The area may have too much light. Picture is not clear • Check the camera lens for dirt, dust, spiderwebs. Clean the lens with a soft, clean cloth. • Make sure that the cable run is within the limitations specified in the section ' Cable Extension Options' Bright spot in video when viewing camera at night • Night vision reflects when pointing a camera to a window. Move the camera to a different location. BNC connection does not connect to my TV • Use a BNC to RCA adapter at the end of the extension cable. Troubleshooting Option Cable Type 1 Regular BNC (supplied with camera) 180ft / 55m 3 2 'RG59' or 'Coax' or ' Coaxial' BNC (sold sepa- rately) 300ft / 92m 5 3 Lorex Universal Cable (sold separately) 300ft / 92m 3 Max. Cable Run Distance Max. # of Extensions MODEL: CVC6996 SERIES English Version 1.0 Camera Specifications Notes: 1. For optimal performance, consider using option 2 or 3. Preference for using the same cable type for the entire distance. 2. Cable run recommendation based on typical camera power consumption (up to 500mA). For specialty cameras with higher current consumption, maximum cable run may be reduced. Consider providing power to the camera at the camera side rather then at the end of the extension cable. 3. Indicators that your cable run may be too long: • Video is permanently Black & White (even during day time) • Video is distorted Extend the cable run for your camera up to 300ft or more depending on the cable type used. See table below: Image Sensor 1/4” Advanced Color Lens / Lens Mount Video Format / Pixels Horizontal Resolution Minimum Illumination Termination IR / Night Vision Range FOV (diagonal) S/N Ratio Sync. & Scan. Systems Video Output Power Consumption NTSC: 656(H) x 492 (V) 480 TVL 0.6 LUX @ F1.2 (IR off) 0 LUX (IR LEDs on) Video: BNC Female Power: Barrel Female 30 IR LEDs/850nm/75’ (23m) 50 Degrees > 48dB Internal; 2:1 Interlace Comp. 1.0 Vpp @ 75ohm 220 mA or 3W max Operating Temp. Dimensions LxWxH (with sunshade) 14°F ~ 122°F (-10°C ~ 50°C) 5.1" x 3" x 5.1" 130 mm x 75 mm x 129 mm 5.0 mm F2.8/ Fixed Iris & Shutter Speed AES; 1/60 ~ 1/50,000 sec. Power Requirement 12V DC ±10% Weight (with stand) 0.66 lb / 0.3 kg Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades www.lorextechnology.com IT’S ALL ON THE WEB! 3.2"/80mm 3"/ 75mm 5.1"/ 129mm 2.5" 62mm 5.1"/130mm