Lorex LNB8921 Series Manuals

4K Ultra HD IR Bullet IP Camera LNB8921_QSG_EN_R2 Quick Start Guide English Version 2.0 Copyright © 2018 Lorex Corporation As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved. • For a full list of compatible recorders, visit lorex.com/compatibility. • Not intended for submersion in water. Installation in a sheltered location recommended. • This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing modes, an audible clicking noise may be heard from the camera. This clicking is normal, and indicates that the camera filter is working. Disclaimers Dimensions 7.1” / 180mm 2.8” / 70mm LNB8921 SERIES Resources Need Help? Visit us online for up-to-date software and complete instruction manuals Click on the Downloads tab 4 Visit lorex.com Search for the model number of your product Click on your product in the search results 3 2 1 • IR Bullet IP Camera • Mounting Kit* • Mounting Template* • Ethernet Extension Cable with Pre-attached RJ45 Cable Gland* * Per camera in multi-camera packs. Package Contents ATTENTION: It is recommended to connect the camera to the NVR or an external PoE switch. If using a DC power adapter (not included) with the camera, a REGULATED power supply is REQUIRED for use with this camera. Use of a non-regulated, non-conforming power supply can damage this product and voids the warranty. • Use the camera only with compatible Lorex NVRs. • Read this guide carefully and keep it for future reference. • Follow all instructions for safe use of the product and handle with care. • Use the camera within given temperature, humidity and voltage levels noted in the camera’s specifications. • Do not disassemble the camera. • Do not point the camera directly towards the sun or a source of intense light. • Use only a regulated power supply with the product (optional). Use of a non-regulated, non-conforming power supply can damage the product and void the warranty. • Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh, chemical-based cleaners. • The supplied cable is rated for surface mounting only. Cables for in-wall and floor-to-floor installations are sold separately (CMR type). These and other cables are available at lorex.com Safety Precautions • Point the camera where there is the least amount of obstructions (i.e., tree branches). • Install the camera where vandals cannot easily reach. • Secure cabling so that it is not exposed or easily cut. • This camera is rated for outdoor use. Installation in a sheltered location is recommended. Installation Tips www.lorex.com Camera Overview B A C D E A. Light Sensor and IR LEDs B. Sun Shield Screw C. Adjustment Screw D. Camera Base E. Reset Button: Press and hold the button for 5 seconds to reset the camera to default settings.