LORUS nx04 Manuals

INSTRUCTION MANUAL CAL. NX04 (RD9 SERIES) NRENX04 05-00 I CHARACTERISTICS 1. Time/calendar display: • Analogue display: Hour, minutes and seconds. •Digital display: Hour, minutes, seconds, date and day of the week. • Fully automatic calendar: Calendar adjusts automatically for odd and even months including February of leap years from the year 2000 to the end of 2050. •Time indication: Changeover between 12- and 24-hour indications is possible. 2. World time: The time of 27 cities in different time zones throughout the world can be displayed together with the time difference between the selected city and your area. • Daylight saving time setting 3. Stopwatch: Measures up to 23 hours, 59 minutes and 59 seconds in 1/100 second increments for the first hour and in 1-second increments thereafter. 4. Regular alarm: The regular alarm can be set to ring on a 24-hour basis. 5. Single-time alarm: The single-time alarm can be set to ring only once at the designated time. As it rings, it is automatically disengaged. 6. Demonstration function: Each mode is displayed for 2 seconds in order. 7. Illuminating light: The light evenly illuminates the display for easy viewing in the dark. I CROWN/BUTTONS AND DISPLAYS Hour Minutes B C D A Seconds Crown Second hand Date Day Minute hand Hour hand WORLD TIME mode TIME/CALENDAR mode ➡ A ➡ A ➡ A By pressing button “C” in the TIME/CALENDAR mode, the SINGLE-TIME ALARM mode is shown. With each press of button “D” in the TIME/ CALENDAR mode, the display changes over in the following order. I HOW TO SET THE TIME/CALENDAR • Before setting the analogue time, be sure to set the digital time. DIGITAL TIME/CALENDAR SETTING Minutes 1. Press button “A” to show the TIME/CALENDAR mode. 2. Press button “A” for 2 to 3 seconds to show the TIME/CALENDAR SETTING display. * The world map and a city mark appear, and the part of the map representing the city flashes. • Once the time/calendar of your area is set in the TIME/CALENDAR mode, the times of the 27 cities covered in the WORLD TIME mode will be set automatically. C B A D Date Day Hour Seconds City mark Note: If the watch is left untouched in the WORLD TIME mode, it will automati- cally return to the TIME/CALENDAR mode in 1 to 2 minutes. TIME/CALENDAR mode SINGLE-TIME ALARM mode C ➡ REGULAR ALARM mode STOPWATCH mode ➡ A D Time/calendar display Calendar display Blank display ➡ ➡ D ➡ D The selection of the mode can be made in the following order with each press of button “A”. 4. Press button “D” to set the flashing digits/ segments. * Before setting the time/calendar, be sure to select the city representing your area. (For the city marks and cities they represent, see “Time differences”) * One digit is advanced with each press of button “D”. Digits except seconds and 12- /24-hour indication move quickly by keeping button “D” pressed. 5. After all the adjustments are completed, press button “A” to return to the TIME/ CALENDAR mode. G Seconds setting When the seconds digits are flashing, press button “D” in accordance with a time signal. The seconds are reset to “00” and start immediately. When the seconds count any number from “30” to “59” and button “D” is pressed, one minute is added and the seconds are immediately reset to “00”. 3. Selection of the digits/segments to be adjusted (flashing) is made in the following order by pressing button “C”. G 12-/24-hour indication setting Changeover between 12- and 24-hour indications is made alternately with each press of button “D”. Notes: 1. When setting the hour digits in the 12-hour indication, check that AM/PM is properly set. Only “PM” mark is displayed and there is no indication for the AM setting. In the 24-hour indication, “24” is displayed. 2. Once the year, month and date have been set, the day of the week is set automatically. 3. If the watch is left untouched in the TIME/ CALENDAR SETTING display with the digits/ segments flashing, it will automatically return to the TIME/CALENDAR mode in 1 to 2 minutes. ANALOGUE TIME SETTING City Seconds → → Hour → Year → → → 12-/24-hour indication Date → Month → Minutes Hour hand Crown a b Second hand a : Normal position b : Extended position Minute hand 1. Pull out the crown when the second hand is at the 12 o’clock position. 2. Turn the crown to set the hour and minute hands to the time shown in the digital display. * When setting the minute hand, advance it 4 to 5 minutes ahead of the desired time and then turn it back to the exact minute. 3. Push the crown back in to the normal position when the second digits count “00” in the digital display. A convenient way of using the TIME/ CALENDAR mode • When you travel around different time zones, the time and calendar of the place you visit can easily be shown in the TIME/CALENDAR mode. 1. Press button “A” for 2 to 3 seconds in the TIME/CALENDAR mode to show the TIME/ CALENDAR SETTING display. 2. Press “D” repeatedly to select the city representing the place you are visiting. 3. Press button “A” to return to the TIME/ CALENDAR mode, and then, adjust the hands to the digital time. I HOW TO USE THE WORLD TIME • The times of 27 cities in different time zones throughout the world can be displayed together with the time difference between the selected city and your area. • Daylight saving time can be set for each city. Note: To display the times of the cities cov- ered in the WORLD TIME mode prop- erly, it is necessary to select the city representing your area and set the cor- rect time in the TIME/CALENDAR mode. (See “I HOW TO SET THE TIME/CAL- ENDAR”) C City mark B D A Daylight saving time mark Time difference Selected area (flashing) Time of the selected area 1. Press button “A” to show the WORLD TIME mode. 2. Press button “C” or “D” to select the desired city. * With each press of button “C” and “D”, the flashing segments of the map move rightward and leftward, respectively. * If a selected time zone has no city mark set for the watch, “– – – – – –” will be displayed in place of a city mark. Displaying the daylight saving time 1. Press button “C” or “D” to select the desired city. 2. Press button “A” for 2 to 3 seconds to show the DAYLIGHT SAVING TIME SETTING display. * A flashing “DST” mark appears. 3. With each press of button “D”, the standard time and daylight saving time of the selected city are alternately shown. 4. Press button “A” to return to the WORLD TIME mode. Notes: 1. When the daylight saving time is set for the city selected in the TIME/CALENDAR mode, the current time is advanced by one hour. 2. If the watch is left untouched in the DAYLIGHT SAVING TIME SETTING display with the daylight saving time mark flashing, it will automatically return to the WORLD TIME mode in 1 to 2 minutes. Time differences UTC = coordinated universal time City mark City name – Honolulu Anchorage Los Angeles Denver Chicago New York Caracas Rio de Janeiro – – – London Paris Cairo Jerusalem Jeddah Tehran Dubai Kabul Karachi Delhi Dhaka Yangon Bangkok Hong Kong Tokyo Adelaide Sydney Nouméa Wellington UTC ± (hours) [standard time] UTC ± (hours) daylight [ saving time ] –11:00 –10:00 –09:00 –08:00 –07:00 –06:00 –05:00 –04:00 –03:00 –02:00 –01:00 +00:00 +00:00 +01:00 +02:00 +02:00 +03:00 +03:30 +04:00 +04:30 +05:00 +05:30 +06:00 +06:30 +07:00 +08:00 +09:00 +09:30 +10:00 +11:00 +12:00 –10:00 –09:00 –08:00 –07:00 –06:00 –05:00 –04:00 –03:00 –02:00 –01:00 +00:00 – +01:00 +02:00 +03:00 +03:00 +04:00 +04:30 +05:00 +05:30 +06:00 +06:30 +07:00 +07:30 +08:00 +09:00 +10:00 +10:30 +11:00 +12:00 +13:00 * For the time zones with “*” mark in the table above, “– – – – – –” will be displayed in place of a city mark. (–11)* HNL ANC LAX DEN CHI NYC CCS RIO (–2)* (–1)* UTC LON PAR CAI JRS JED THR DXB KBL KHI DEL DAC RGN BKK HKG TYO ADL SYD NOU WLG