Ltech Artnet-DMX-8 Manuals

Artnet-DMX Control System Manual Artnet-DMX-8 1 www.ltech-led.com Product Introduction Ethernet Control System based on the Artnet protocol. Set different network segments to avoid multiple sets Artnet data interference. Convert the Artnet network data package into DMX512 data. Adopting high-speed ARM processor, stable and reliable. Supports RJ45 network interface and 3-pin XLR DMX512 output interface. With LCD screen display and 4 buttons, convenient operation, intuitive settings. Standard 1U(19") chassis architecture, convenient installation in the standard cabinet. Provides 8 standard DMX512 data output port. Compatible with the light software based on Artnet Protocol, control stage lighting Connect up to 256 DMX universes to one network. 10/100Mb Ethernet port. Data activity indicators. Configurable DMX output refresh rates. Manage Artnet on broadcast mode or unicast mode. Widely used in the LED dot matrix and the stage lighting control network in needing Suitable for TV station recorded scene, stage performances, entertainment and so on. and LED lighting simultaneously. lots of DMX512 data. warranty 5 years

Artnet-DMX converter is the Ethernet Control System based on the Artnet protocol, used to convert the Artnet network date package into DMX512 date, adopting high-speed ARM processor, stable and reliable working. Following Art-net standard protocol, it supports RJ45 network interface and standard DMX512 output interface. Artnet-DMX-8 Artnet-DMX Converter 1 Artnet-DMX-8 Artnet-DMX Converter DMX512 5-24VD (with a power adaptor) C L482.6×W200×H44mm L550×W265×H100mm 2200g -20 ℃~65 ℃ Working temperature: Artnet 8×512 channels warranty 5 years Artnet-DMX-8 Output signal: Power input: Dimension: Package Size: Weight (G.W): Input signal: DMX channels: 1. Technical Specs It is compatible with all the effects lighting control software which support Art-net protocol, widely used in the LED dot matrix and the stage lighting control network in needing lots of DMX-512 data, especially for TV station recorded scene, stage performances, entertainment and so on. Artnet-DMX-8 provides 8 standard DMX512 data output port, total output 8×512 data. Artnet-DMX-8 use standard 1U(19") chassis architecture, convenient installation in professional cabinet, easily operation setting with LCD display. RJ45 Network Connection: XLR-3 IP: Indoor use only Isolation Ethernet Port: Total Isolation Isolation Power Input: Total Isolation Current: 30mA@12VDC DMX Output Connection: 2. Performance Features 2.1. Based on Artnet protocol network data communication, accept network DMX data. 2.2 Two different IP address for each controller 2.3. Send packets to the network by broadcast mode 3. Product dimension: 4. Interface instruction: 2 Artnet-DMX-8 Artnet-DMX Converter 2.5. Standard 1U(19" ) chassis architecture, convenient installation in the standard cabinet. 2.6. With LCD screen display, convenient operation intuitive settings 2.7. Provides 8 standard DMX512 data output port,output 8×512 data in total. 2.8. Set different network segments to avoid multiple sets Artnet data interference. 2.9. Compatible with the light software based on Artnet Protocol, control stage lighting and LED lighting simultaneously. 2.10 Connect up to 256 DMX Universes to one network. 2.11 10BaseT Ethernet Port. 2.12 Data activity indicators 2.13 Configurable DMX output refresh rates. 2.4. Manage Artnet on broadcast mode or unicast mode Back Other Functions of Button: Press the menu button in the main interface to enter the menu interface(see the below table). Press the +/- button / to move up and down the menu and set the relative parameter through press the setting button . Press the +/- button / can increase or decrease the parameter. Press the setting button to save the setting when finished and press the menu button to quit the setting status. Button Operating Instructions: In the main interface, long press the setting button to enter test mode (send the dark, light and highlighting skipping data changing effect to the 8 ports). Press the menu button or setting button to quit the test mode. In the main interface, long press the +/- button / at the same time to restore factory settings. www.ltechonline.com