Lutron Electronics Grafik Eye PB Manuals

1 pdf manual(s) Lutron Electronics Grafik Eye PB for free download (Document Types: Installation instructions manual)

Lutron Electronics Grafik Eye PB Installation instructions manual [PDF] (40 pages)

  • Identifier: id-1255754
  • Brand: Lutron Electronics
  • Device: Grafik Eye PB Recording Equipment
  • Type: PDF
  • Key Aspects: Error Code Explanations, Advanced Configuration Methods, FAQ Section for Common Queries
  • UPD Date: 19.04.2026
  • Source File: 902515.pdf
  • Pages: 40
  • Description: Professional operation guide for the Lutron Electronics Grafik Eye PB.
Pages Preview:
  • Unit PB ELVI FDBI 120V 1920W/VA 16A 1000W/VA 8.3A 1920W/VA 16A 220-240V (AU) 2400W/VA 10A 1200W/VA 5A 2400W/VA 10A 230V (CE) 1840W/VA† 8A† 1200W/VA 5.2A — — Interface shown with faceplate removed 2 UP UP 4.5 in.(115 mm) 4.5 in.(115 mm) Danger! Always turn OFF the circuit breakers/MCB or remove the main fuses from the power line before doing any work. Failure to do so can result in serious personal injury. More than one MCB can power this device. Di
  • HOT/LIVE ZONE NEUTRAL 4 3 2 1 USA: Class 2 IEC: PELV DO NOT USE H/L N HOT/LIVE EARTH/GROUND ZONE OUT ZONE IN NEUTRAL N I Turn power Off. I PB/ELVI: Connect standard switch between Hot/Live lead and the load wire to test circuit. I FDBI: Connect standard switch between Hot/Live lead and the Dimmed Hot/Live and switched Hot/Live leads of the ballast. I Turn power On and check for short or open circuits. 3 Test load for short circuits Wiring Instructions 1. T
  • Single-Feed Wiring for PB/ELVI 230V The PB/ELVI may be on the same circuit as the Control Unit only if the total load does not exceed the rating of the breaker. HOT/LIVE ZONE NEUTRAL 4 3 2 1 USA: Class 2 IEC: PELV DO NOT USE H/L N HOT/LIVE EARTH/GROUND ZONE OUT ZONE IN NEUTRAL N H/L N HOT/LIVE ZONE NEUTRAL 4 3 2 1 USA: Class 2 IEC: PELV DO NOT USE H/L N HOT/LIVE EARTH/GROUND ZONE OUT ZONE IN NEUTRAL N Dual-Feed Wiring for PB/ELVI 230V The load breaker/MCB
  • HOT/LIVE ZONE NEUTRAL 4 3 2 1 USA: Class 2 IEC: PELV SW HOT/LIVE H/L N HOT/LIVE EARTH/GROUND ZONE OUT ZONE IN NEUTRAL N HOT/LIVE ZONE NEUTRAL 4 3 2 1 USA: Class 2 IEC: PELV SW HOT/LIVE H/L N HOT/LIVE EARTH/GROUND ZONE OUT ZONE IN NEUTRAL N H/L N 5 Single-Feed Wiring for FDBI 120V and 220-240V The FDBI may be on the same circuit as the Control Unit if, and only if, the total load does not exceed the rating of the breaker. Connect ZONE OUT only to Lutron Hi-
  • 6 1. Confirm all connections and mount the Interface using the screws provided. 2. Restore power to the system. Mounting: Interface must be mounted vertically! 2-gang wallbox Faceplate Flush Mount Surface Mount SW HOT/LIVE HOT/LIVE EARTH/GROUND ZONE OUT ZONE IN NEUTRAL N H/L N HOT/LIVE ZONE NEUTRAL 4 3 2 1 USA: Class 2 IEC: PELV SW HOT/LIVE H/L N HOT/LIVE EARTH/GROUND ZONE OUT ZONE IN NEUTRAL N H/L N Dual-Feed Wiring for Two (2) FDBI Interfaces on One Zone
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Power Booster (PB) Electronic Low Voltage Interface (ELVI) Fluorescent Dimming Ballast Interface (FDBI) Installation Instructions — Please Read PB ELVI FDBI Incandescent Magnetic Low Voltage Neon/Cold Cathode Lutron Tu-Wire® Dimming Ballast Electronic Low Voltage Lutron Hi-lume ® or Eco-10 ™ Fluorescent Dimming Ballast UP UP UP UP UP UP ® Power Interfaces 030-739 8/1/02 2:22 PM Page 1

Lutron Electronics Grafik Eye PB: Recording Equipment Category Related Instructions

ECP5-5G
Lattice Semiconductor ECP5-5G
11.03.2026 32 pages

ECP5-5G™ Versa Development Board User Guide EB103 Version 1.2, January 2016 Technical guide for the Lattice Semiconductor ECP5-5G Motherboard. The document includes warranty information, supported accessories, startup procedures, hardware components.

ME-25
Boss ME-25
14.05.2026 104 pages

Owner’s Manual Mode d’emploi Manuale dell'utente Manual de instrucciones Manual do proprietário Gebruikershandleiding Bedienungsanleitung Español Português Nederlands Italiano Français Deutsch English Product instruction manual for the Boss ME-25 Music Pedal. This documentation explains configuration and technical troubleshooting, safety protocols, configuration options, usage tips.

R15IB3S-PCC3-PoE
Winmate R15IB3S-PCC3-PoE
14.07.2026 36 pages

Please read these instructions carefully before using this product, and save this manual for future use 15” S-Series HMI R15IB3S-PCC3-PoE Quick Start Guide V1.0 For more information on this and other Winmate products, please visit our website at: www.winmate Device maintenance guide for the Winmate R15IB3S-PCC3-PoE Touch Panel. The manual highlights user preferences, startup procedures, network setup, wiring diagrams.

MD-2321
Onkyo MD-2321
11.03.2026 32 pages

Contents Before using Important Safeguards........................ 2 Precautions ....................................... 3 Features............................................. 4 Supplied accessories......................... 4 Before operating this unit....... User reference manual for the Onkyo MD-2321 Recording Equipment. It details troubleshooting tips and safety features, assembly reference, error handling, user settings.