M7 R56 Manuals

Rev 12-31-2013 Page 1 of 6 www.m7tuning.com M7 Tuning Ultimate MINI Performance M7 R56 Carbon Fiber & Tegris Splitter Factory Aero Bumper (Model years 2011-2013) Installation Guide M7 Tuning engineers and manufactures the highest quality MINI accessories and performance parts available anywhere on the planet! Please read these instructions completely BEFORE attempting to install this product. If you are not confident you can do the work described or do not have the tools necessary please contact a local M7 dealer (listed on or website www.m7tuning.com) or a local accessory installation center to perform this work. CONTENTS: Qty M7 P/N Description 1 Splitter (Carbon Fiber or Tegris) 13 95-9006 #12 Truss Head Self Tapping Screw (1 extra) 13 95-4001 Expanding Retainer-Black Plastic (1 extra) 1 95-9005 AVK Insert Tool #10-32 3 95-5002 #10-32 Expanding NutSert 2 95-9012 APR Strut Rod 10 95-9013 Rubber washers 3/4" OD x 1/4" ID 1 95-2009-SS #10-32 x 1 1/2" Button Head SS 4 95-3004-SS #10-32 x 5/8" SHCS SS 9 95-7001-SS #10 x 3/4" OD Flat fender washer 2 95-8019 #10-32 Half Height Nyloc Nut 1 99-1000 Sticker Pack TOOLS NEEDED:  #2 Phillips screw driver (power nut driver recommended)  Electric drill  1/8” drill bit  ¼” drill bit  3/8” drill bit  3/8” open end wrench  7mm open end wrench  8mm open end wrench  5/32” Allen wrench  Red Locktite (Thread locker)  A friend to help