Mackie MR8 Manuals

Safety First! Before connecting and using the equipment, please read this Quick-Start Guide carefully and keep it for future reference. WARNING WARNING WARNING WARNING WARNING! This equipment has been designed to be installed by qualified professionals only! There are many factors to be considered when installing professional sound reinforcement systems, including mechanical and electrical considerations, as well as acoustic coverage and performance. Mackie Industrial strongly recommends that this equipment be installed only by a professional sound installer or contractor. 1. 1.1. 1. 1. Attention to the precautions Attention to the precautions Attention to the precautions Attention to the precautions Attention to the precautions – Always follow the precautions provided on this Mackie Industrial product and in the instruction manual. 2. 2.2. 2. 2. Water and humidity Water and humidity Water and humidity Water and humidity Water and humidity – Do not use this Mackie Industrial product near water; for example, in the vicinity of a bath tub or sink, in a damp cellar, near a swimming pool, etc.. MONITOR MR8/MR8W Compact Two-Way Speaker Quick-Start Guide 3. 3.3. 3. 3. Foreign bodies and liquids Foreign bodies and liquids Foreign bodies and liquids Foreign bodies and liquids Foreign bodies and liquids – Be careful not to allow any foreign bodies or liquids to get into this Mackie Industrial product. 4. 4.4. 4. 4. Technical service Technical service Technical service Technical service Technical service – The user should never attempt to make any repairs on this Mackie Industrial product unless otherwise indicated in the instruction manual. All repairs should be made by qualified service technicians. 5. 5.5. 5. 5. Installation Installation Installation Installation Installation – Do not install this Mackie Industrial product in any way that is not provided for in the instruction manual. 6. 6.6. 6. 6. Stacking multiple units Stacking multiple units Stacking multiple units Stacking multiple units Stacking multiple units – To prevent the danger of falling equipment, never stack multiple units of this Mackie Industrial product unless this possibility is expressly indicated in the instructions. 7. 7.7. 7. 7. Respect the safety standards Respect the safety standards Respect the safety standards Respect the safety standards Respect the safety standards – The entire sound system must be designed in compliance with the current standards and laws regarding electrical systems. The MR8 (Black) and MR8W (White) are a compact two-way speaker system designed for constant-impedance systems. The 8" carbon fiber woofer, in combination with a 1" titanium dome tweeter mounted on a 110° x 90° constant directivity horn, provide natural, smooth sound reproduction, ideal for use in business music systems, indoor/outdoor foreground/background music applications, and near-field monitoring. The passive crossover is designed to reduce heat dissipation and optimize the power response of the loudspeaker. Connections are made to recessed, gold plated banana terminals. The enclosure is constructed of high- density polystyrene, with integrated mounting points for use with the optional mounting hardware, and includes a protective perforated steel grille. 8. 8.8. 8. 8. Specifications Specifications Specifications Specifications Specifications – When installing and using this Mackie Industrial product, keep in mind the technical specifications indicated in the dedicated section of the manual. 9. 9.9. 9. 9. Accessories Accessories Accessories Accessories Accessories – Install and use this Mackie Industrial product only with the accessories specified by the manufacturer or supplied with the product. Hearing loss Hearing loss Hearing loss Hearing loss Hearing loss - Exposure to high sound levels can cause permanent hearing loss. The sound pressure level which leads to hearing loss varies considerably from one person to another, and depends on the duration of exposure. The U.S. Government’s Occupational Safety and Healt Administration (OSHA) has established the maximum sound pressure levels that can be with stood without causing damage, which are shown in the table below. According to the OSHA regulations, any exposure over the maximum limits indicated in the table can reduce the hearing capacity of a person. To prevent potentially dangerous exposure to high sound pressure levels, anyone subjected to such levels must use suitable protection. When a Mackie Industrial product capable of producing high sound levels is being used, it is therefore necessary to wear ear plugs or protective earphones when the limits shown in the table are exceeded. Consult the specifications provided in the instruction manual to know the maximum sound pressure (SPL) the speaker is capable of producing. Dura it on per ay (hours) d Sound level (dBA) yp ci al example T 8 90 lc ub uo in a sma ll D 6 2 9 4 95 ubway rt ain S 3 7 9 2 100 ery loud lc as cis al mu cis V 1.5 02 1 1 105 ocomo it ve at 50 feet L 0.5 10 1 0.25 or less 115 oudest pa tr s at a rock conce tr L 2 + – + – OUTPUTS POWER AMPLIFIER – + – + L R 4 Ohm Stereo Connection CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE INDUSTRIAL MADE IN ITALY • COPYRIGHT ©1999 THE FOLLOWING ARE TRADEMARKS AND REGISTERED TRADEMARKS OF MACKIE DESIGN INC.: "MACKIE", "MACKIE INDUSTRIAL", & THE "RUNNING MAN" FIGURE MONITOR 8 SERIAL NO. POWER CAPACITY 300W NOMINAL IMPEDANCE 8 Hookup 3

Monitor Series Compact Full-Range Speaker MR8 SPEAKER � The MR8 is the result of extensive research in the development of new transducers and crossover design. The result is a product with exceptional fidel-ity, the ability to produce deep controlled bass and extended high frequencies without sacrificing efficiency. � The low-frequency 8" driver's low-mass, carbon fiber diaphragm remains extremely rigid at high power levels, producing a more linear response and lower distortion. The cone is fitted with a durable foam surround and treated to resist moisture. The high- frequency section features a constant directivity horn with a built-in mechanical phase equalizer. The horn is driven by a Ferrofluid® cooled, 1" titanium dome tweeter. � The system is nominally crossed over at 1.6kHz by a 12 dB/octave network, which uses markedly lower (than conventional) inductance values in series with the woofer. This design reduces sound delays associ- ated with high inductance values and provides excel- lent low frequency transient response. � All components are housed in a vented enclosure formed from semi-expanded polystyrene foam that is extremely strong, lightweight and weather resistant. Threaded metal sockets are molded into the cabinet to facilitate quick, safe deployment of the MR8, as a single unit or in arrays, using specially designed accessory mounting hardware. The speaker system is available in black or white (MR8W). � The MR8 is a part of Mackie Industrial’s Monitor Series, which includes two-way constant directivity, compact speakers in easily installed enclosures. � This Mackie Industrial product is covered by an exclusive, one-time, NO FAULT repair policy in addition to a five year limited warranty. Features � 8" cast aluminum basket, high-efficiency carbon fiber woofer � 110° x 90° constant directivity horn with Ferrofluid® cooled, 1" titanium dome tweeter � Built-in, LICC low inductance passive crossover with high frequency dynamic protection � Lightweight, UV/weather resistant, high density polystyrene, trapezoidal shaped enclosure for multiple applications and minimum visual intrusion � Integrated mounting points for use with optional mounting hardware � Exclusive Mackie Industrial — one-time, NO FAULT repair policy � Five year limited warranty oF 6 PAGES 1 O F 6 P A G E S MR8 APPLICATIONS � Foreground/Background Music � Distributed Speech Reinforcement � AV Production/Playback � Near-field Monitoring MR8W oF 6 PAGES 2 O F 6 P A G E S Compact Two-Way Speaker MR8 SPEAKER MR8 oF 6 PAGES 2 O F 6 P A G E S Specifications System Freq. Range (–10dB): 50Hz–21kHz Freq. Response (–3dB): 70Hz–20kHz Horz. Coverage Angle (–6dB): 110° averaged 800Hz to 16kHz Vert. Coverage Angle (–6dB): 90° averaged 800Hz to 16kHz Directivity Factor; Q (DI): 6.5 (8.2) averaged 800Hz to 16kHz System Sensitivity1: 91 dB, 1W @ 1m Rated Maximum SPL: 120 dB, @ 1m System Input Power Rating2: 300W IEC; 1200W Peak System Nominal Impedance: 8Ω Recommended Amplifier3: 450W HF Protection: Dynamic Crossover: 1.6kHz, 12 dB/octave Transducers Low-Frequency: 8" (200mm) carbon fiber woofer with 1.5" (38mm) coil High-Frequency: Horn loaded 1" (25mm) titanium dome tweeter, Ferrofluid cooled Physical Enclosure: 45° back angles, high density polystyrene Attachment Inserts: 2 points M6 threaded on back 2 points 3/8" threaded on top and bottom Color: Matte black, white (MR8W), scratch resistant paint, Grille: Matching perforated steel grille Input Connectors: Push connector plate Dimensions (HxWxD): 16.94" x 11.42" x 10.24" (430mm x 290mm x 260mm) Net Weight: 21.6 lb. (9.8 kg) Options MA 8-3, MA 8-3W U-bracket, black (W-white) MA 8-7 Hardware for suspending and tilting 4 clustered speakers, black 1Measured on axis in the far field with 1 watt (2.83V RMS, 8) input and referenced to 1 meter distance using the inverse square law. Listed sound pressure represents an average from 300Hz to 3kHz. 2IEC Spectrum, Peak for 2 hours with +4.5 dB crest factor. 3Recommended Amplifier is a power capability value that should be taken as a guide. oF 6 PAGES 3 O F 6 P A G E S Compact Two-Way Speaker MR8 oF 6 PAGES 3 O F 6 P A G E S 0˚ 200Hz 250Hz 315Hz 400Hz Monitor 8 Vertical Polars 0˚ 500Hz 630Hz 800Hz 1kHz 0˚ 1.25kHz 1.6kHz 2kHz 2.5kHz 0˚ 3.15kHz 4kHz 5kHz 6.3kHz 0˚ 8kHz 10kHz 12.5kHz 16kHz Vertical Off-Axis Frequency Response (UP) Vertical Off-Axis Frequency Response (DOWN)

��������������� ��� High Resolution Active Studio Monitor � MR5 MR5 IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. Use a non-scratch cloth to protect the finish. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 15. This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids, such as vases, shall be placed on the apparatus. 16. Note that this apparatus is not completely disconnected from the AC mains service when the power switch is in the OFF position. 17. The MAINS plug or an appliance coupler is used as the disconnect device, so the disconnect device shall remain readily operable. 18. Exposure to extremely high noise levels may cause permanent hearing loss. Individuals vary considerably in susceptibility to noise-induced hearing loss, but nearly everyone will lose some hearing if exposed to sufficiently intense noise for a period of time. The U.S. Government’s Occupational Safety and Health Administration (OSHA) has specified the permissible noise level exposures shown in the following chart. According to OSHA, any exposure in excess of these permissible limits could result in some hearing loss. To ensure against potentially danger- ous exposure to high sound pressure levels, it is recommended that all persons exposed to equipment capable of producing high sound pres- sure levels use hearing protectors while the equipment is in operation. Ear plugs or protectors in the ear canals or over the ears must be worn when operating the equipment in order to prevent permanent hearing loss if exposure is in excess of the limits set forth here. Correct disposal of this product. This symbol indicates that this product should not be disposed of with your household waste, according to the WEEE Directive (2002/96/EC) and your national law. This product should be handed over to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper handling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the effective usage of natural resources. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, waste authority, or your household waste disposal service. PORTABLE CART WARNING CAUTION AVIS RISK OF ELECTRIC SHOCK. DO NOT OPEN RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL ATTENTION: POUR EVITER LES RISQUES DE CHOC ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE. AUCUN ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER. CONFIER L'ENTRETIEN AU PERSONNEL QUALIFIE. AVIS: POUR EVITER LES RISQUES D'INCENDIE OU D'ELECTROCUTION, N'EXPOSEZ PAS CET ARTICLE A LA PLUIE OU A L'HUMIDITE The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure, that may be of sufficient magnitude to constitute a risk of electric shock to persons. Le symbole éclair avec point de flèche à l'intérieur d'un triangle équilatéral est utilisé pour alerter l'utilisateur de la présence à l'intérieur du coffret de "voltage dangereux" non isolé d'ampleur suffisante pour constituer un risque d'éléctrocution. The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Le point d'exclamation à l'intérieur d'un triangle équilatéral est employé pour alerter les utilisateurs de la présence d'instructions importantes pour le fonctionnement et l'entretien (service) dans le livret d'instruction accompagnant l'appareil. Duration, per day in hours Sound Level dBA, Slow Response Typical Example 8 90 Duo in small club 6 92 4 95 Subway Train 3 97 2 100 Very loud classical music 1.5 102 1 105 Dave screaming at Steve about deadlines 0.5 110 0.25 or less 115 Loudest parts at a rock concert WARNING — To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Part No. SW0567 Rev. D 01/09 ©2007-2009 LOUD Technologies Inc. All Rights Reserved. � Owner’s Manual Owner’s Manual Don’t forget to visit our website at www.mackie.com for more information about this and other Mackie products. R Monitor 1 Monitor 2 • Please write the serial number for your studio monitor here (all studio monitors if you have more than one) for future reference (i.e., insurance claims, tech support, return authorization, etc.): Purchased at:___________________________________ Date of Purchase:_____________ Monitor 3 Contents IMPORTANT SAFETY INSTRUCTIONS ...........� INTRODUCTION..................................................4 QUICK START ............................................................................5 REAR PANEL DESCRIPTION ..............................6 1. SIGNAL INPUTS................................................................6 �. INPUT LEVEL ....................................................................6 �. HIGH FREQUENCY FILTER ............................................6 4. LOW FREQ FILTER ............................................................7 5. Power Switch ....................................................................7 6. Mains Input and Fuse .....................................................7 7. Bass Reflex Port ................................................................7 FRONT PANEL DESCRIPTION ...........................7 8. Power Indicator ...............................................................7 PROTECTION CIRCUITS .....................................8 Overexcursion Protection ................................................8 Thermal Protection ...........................................................8 Integrated Magnetic Shielding .......................................8 Input Signal Wiring ............................................................8 CARE AND CLEANING ........................................8 Appendix A: SERVICE INFO ...............................9 Troubleshooting..................................................................9 Repair ....................................................................................10 Appendix B: CONNECTORS .............................11 Appendix C: TECHNICAL INFORMATION ...1� MR5 Specifications ...............................................................1� MR5 Block Diagram ..............................................................1� MR5 Limited Warranty ....................................15