Magnetek DataLogger 4 Series Manuals

Technical Manual Part Number: 144-27097 R1 February 2021 © Copyright 2021 Magnetek

N49 W13650 Campbell Drive Menomonee Falls, WI 53051 Phone 262.783.3500 Toll-Free Phone 800.288.8178 Canada Toll Free Phone: 800.792.7253 Fax: 905.8281526 For service or technical information contact: 1.866.MAG.SERV (1.866.624.7378) Outside the U.S. & Canada call 1.262.783.3500, press 3 www.columbusmckinnon.com/magnetek © Copyright 2021 Magnetek DataLogger Series 4 Quick Start Guide 144-27098 R1 February 2021 1. Connect to IMPULSE®•G+ Mini, Series 3, or Series 4 VFD The DataLogger Series 4 (DLS4) may be placed directly into the keypad holder on the Series 4 drive. Alternatively, use the supplied Ethernet (CAT5) cable. Plug one end into the RJ45 port on the drive and plug the other end into the RJ45 port on the back of the DLS4. Reference the technical manual for additional information. 2. Set the Date & Time • Navigate to the DataLogger Settings menu and press . • Scroll to the Set Date/Time menu and press . • Choose a value to change and press . The current value will blink. • Use the and keys to choose a desired value and then press to accept. NOTE: To leave any menu or cancel an action, press . 3. Read and Write Parameter Sets • Navigate to the Parameter Backup menu and press . • To read from a drive and store a parameter set, press labeled “READ”. • To confirm and begin the read, press labeled “YES”. • To write parameters from the DLS4 to a drive, press labeled “WRITE”. • To confirm and begin the write, press labeled “YES”. 4. View Run, Fault, and Alarm History • Navigate to the Event History menu and press . • Press on the desired menu and press or to cycle through the history log. • Press or to scroll through additional associated information.