Magtek EXCELLA STX Manuals

Manual Part Number: 99875342-1 EXCELLA STX MICR CHECK READER AND DUAL-SIDED SCANNER INSTALLATION AND OPERATION MANUAL MARCH 2006 REGISTERED TO ISO 9001:2000 Phone: (562) 546-6400 Technical Support: (651) 415-6800 www.magtek.com 1710 Apollo Court Seal Beach, CA 90740 FAX: (562) 546-6301

Figure 4. Rear Print Cartridge Installation/Removal 5. RUN EXCELLA DEMO • Click on the Excella Demo icon to run the demo. • The Demo’s main screen will be displayed (see Figure 5 below). • In the “Select Device” window, choose the device you want to connect (USB or Ethernet). • Click on the “Connect” button. • Based on the document you want to read, click on one of these buttons: o “Check”, to read and scan checks (the left LED is blinking) o “Card”, to read and scan ID cards (the right LED is blinking) o “Check/Card”, the unit will accept either a check or a card (both LED’s blinking) • Feed the appropriate document. • The unit will remain in the Read/Scan mode until the “Stop” button is clicked. P/N 99875344-2.03 09/06 EXCELLA STX INSTALLATION GUIDE (RNDIS USB Drivers or Ethernet Only) 1. START • For USB, go to Step 2 below • For Ethernet, got to Step 3 below 2. USB INSTALLATION Software Installation • Remove earlier versions of the demo using the PC’s Add or Remove Programs. • Insert Excella STX’s Software & Drivers CD in drive; the CD will run automatically. • Follow the wizard instructions to install the software and use the default directories. • When prompted by the Wizard, select option (a) and (b) below to install the Excella STX Demo and API; to skip the Excella STX Demo and only install the API and MagTek USB Drivers, select option (b) only: (a) Excella STX Demo and API (Demo requires drivers for USB Devices) (b) Excella STX USB Driver and API • When done, click on Finish to complete the installation process. • NOTE: The default destination folder is C:\Program Files\MagTek\Excella-STX\ Connect cables • Connect interface USB cable to Excella STX (refer to Figure 1 below). • Connect round connector from the power supply to Excella. • Connect the power cord to the socket on the power supply block. • Connect the three-prong power cord to AC wall outlet. • Wait until only the middle LED is illuminated with a steady green. • Connect interface cable to PC. • NOTE: When the device is plugged in and detected by the PC, the USB drivers will be automatically installed. Figure 1. Cables & Connectors Power Cord Page 4 of 4 Page 1 of 4

3. Ethernet Installation Connect cables • Connect Ethernet interface cable, USB to Excella STX (Figure 3). • Connect round connector from the power supply to Excella. • Connect the power cord to the socket on the power supply block. • Connect the three-prong power cord to AC wall outlet. • Wait until only the middle LED is illuminated with a steady green. • Connect interface cable to PC. Ethernet Configuration • In your web browser, type Excella STX’s default Ethernet IP address as follows: http://192.168.10.100; Excella STX’s built-in web page will be displayed. • In the User Menu, click on Configuration. • Select the Ethernet tab and configure all parameters shown (Figure 2). • Click on Save Settings and close the web browser. • Continue to Step 4, INSTALL INK CARTRIDGE(S). Figure 2. Ethernet Configuration Screen 1. Start For USB, go to Step 2 below. For Ethernet, got to Step 3 below. 2. USB Installation • RUN EXCELLA STX DEMO • Navigate to and run C:\Program Files (x86)\MagTek\Excella-STX- ImageSafe\ Excella-STX_Demo.exe • Click on the Excella Demo icon to run the demo; the main screen will be displayed (Figure 1). • In the Select Device pull-down menu, choose Excella.EXC001. • Click on the Connect button. Connect cables • Connect interface USB cable to Excella STX (Figure 3). • Connect round connector from the power supply to Excella STX. • Connect the power cord to the socket on the power supply block. • Connect the three-prong power cord to AC wall outlet. • Wait until only the middle LED is illuminated with a steady green. • Connect interface cable to PC. NOTE: When the device is plugged in and detected by the PC, the USB drivers will be automatically installed. Excella STX - USB or Ethernet Small Document Scanner Quick Installation Guide Setup and Installation MagTek ® Inc., 1710 Apollo Court, Seal Beach CA 90740 | p 562-546-6400 | support 651-415-6800 | f 562-546-6301 | www.magtek.com Figure 3. Cables & Connectors