Makita 6904VH Manuals

12 pdf manual(s) Makita 6904VH for free download (Document Types: Instruction manual)

Makita 6904VH Instruction manual [PDF] (44 pages)

  • Identifier: id-2361936
  • Brand: Makita
  • Device: 6904VH Impact Driver
  • Type: PDF
  • Key Aspects: Technical Support and Resource Links, Initial Startup Checklist, End-of-Life Handling and Disposal
  • UPD Date: 26.08.2026
  • Source File: 1925668.pdf
  • Pages: 44
  • Description: Practical operating guide for the Makita 6904VH.
Pages Preview:
  • 1 1 1 1 1 2 1 2 3 Fig.1 Fig.2 Fig.3 Fig.4 Fig.5 Fig.6 Fig.7 2
  • 3 ENGLISH ENGLISH (Original instructions) SPECIFICATIONS Model 6904VH 6905H Capacities Standard bolt M10 - M16 M12 - M20 High tensile bolt M10 - M12 M12 - M16 Wood screw 6 mm x 100 mm - Self-drilling screw 6 mm - Square drive 12.7 mm 12.7 mm No load speed (min -1) High: 0 - 2,400 2,200 Low: 0 - 2,100 - Impacts per minute High: 0 - 3,000 2,600 Low: 0 - 2,500 - Max. fastening torque High: 196 N·m 294 N·m Low: 147 N·m - Overall length 265 mm 275 mm Net wei
  • 4 ENGLISH WARNING: The vibration emission during actual use of the power tool can differ from the declared value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed. WARNING: Be sure to identify safety mea- sures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off a
  • 5 ENGLISH Speed change ►�Fig.4: 1. Speed change lever For 6904VH only To�change�the�speed,�first�switch�off�the�tool�and�then� slide the speed change lever fully to the
Document Preview & Text Transcription (Main Page)
Click to expand and read text
6904VH 6905H EN Impact Wrench INSTRUCTION MANUAL 3 UK Ударний гайковерт ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ 8 PL Klucz udarowy INSTRUKCJA OBSŁUGI 13 RO Maşină de înşurubat cu impact MANUAL DE INSTRUCŢIUNI 18 DE Schlagschrauber BEDIENUNGSANLEITUNG 23 HU Ütve csavarbehajtó HASZNÁLATI KÉZIKÖNYV 28 SK Nárazový uťahovač NÁVOD NA OBSLUHU 33 CS Rázový utahovák NÁVOD K OBSLUZE 38

Makita 6904VH Instruction manual [PDF] (20 pages)

  • Identifier: id-554610
  • Brand: Makita
  • Device: 6904VH Impact Driver
  • Type: PDF
  • Key Aspects: Detailed Installation Instructions, Hardware Verification Checklists, Unpacking and Inspection Guidelines
  • UPD Date: 15.03.2026
  • Source File: 541891.pdf
  • Pages: 20
  • Description: Device setup manual for the Makita 6904VH.
Pages Preview:
  • 2 ENGLISH SPECIFICATIONS • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country. GENERAL SAFETY RULES GEA001-3 WARNING: Read all instructions. Failure to follow all instructions listed below may result in elec- tric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to you
  • 3 moment of inattention while operating power tools may result in serious personal injury. 10. Use safety equipment. Always wear eye protec- tion. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal inju- ries. 11. Avoid accidental starting. Ensure the switch is in the off-position before plugging in. Carrying power tools with your finger on the switch or plug- ging
  • 4 SYMBOLS USD202-2 The followings show the symbols used for tool. V............................volts A ...........................amperes Hz..........................hertz ..................alternating current .......................no load speed .......................Class II Construction .../min....................revolutions or reciprocation per minute ..................number of blow FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is
Document Preview & Text Transcription (Main Page)
Click to expand and read text
I N S T R U C T I O N M A N U A L M A N U E L D ' I N S T R U C T I O N M A N U A L D E I N S T R U C C I O N E S WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. AVERTISSEMENT: Pour votre propre sécurité, prière de lire attentivement avant l’utilisation. GARDER CES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE. ADVERTENCIA: Para su seguridad personal, LEA DETENIDAMENTE este manual antes de usar la herramienta. GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA. Impact Wrench Boulonneuse à chocs Llave de impacto 6904VH 6905H 002287 DOUBLE INSULATION DOUBLE ISOLATION DOBLE AISLAMIENTO

Makita 6904VH Instruction manual [PDF] (64 pages)

  • Identifier: id-1003796
  • Brand: Makita
  • Device: 6904VH Impact Driver
  • Type: PDF
  • Key Aspects: Initial Startup Checklist, Step-by-Step Assembly Procedures, Troubleshooting Information
  • UPD Date: 14.08.2026
  • Source File: 1154689.pdf
  • Pages: 64
  • Description: Operational manual for the Makita 6904VH.
Pages Preview:
  • 1 2 3 4 5 6 2
  • ENGLISH Explanation of general view 1 O-ring 2 Socket 3 Pin 4 Switch trigger 5 Clockwise 6 Counterclockwise 7 Reversing switch 8 Speed change lever SPECIFICATIONS Model 6904VH 6905H Capacities Standard bolt ................................................................................. M10 – M16 M12 – M20 High tensile bolt ............................................................................ M10 – M12 M12 – M16 Wood screw .................
  • Reversing switch action For 6904VH (Fig. 3) This machine has a reversing switch to change the direction of rotation. Press the upper side (FWD side) of the switch for clockwise rotation or the lower side (REV side) of switch for counterclockwise rotation. For 6905H (Fig. 4) This machine has a reversing switch to change the direction of rotation. Press the right side (F side) of switch for clockwise rotation or the left side (R side) of the switch for count
  • For 6905H – Standard bolt – – High tensile bolt – Hold the machine firmly and place the socket over the bolt or nut. Turn the machine on and fasten for the proper fastening time. NOTE: • Hold the machine pointed straight at the bolt or nut without applying excessive pressure on the machine. • Excessive fastening torque may damage the bolt or nut. Before starting your job, always perform a test operation to verify the adequate fastening speed an
Document Preview & Text Transcription (Main Page)
Click to expand and read text
GB Impact Wrench Instruction Manual F Boulonneuse à Chocs Manuel d’Instructions D Schlagschrauber Betriebsanleitung I Avvitatrici ad Impulso Istruzioni d’Uso NL Slagmoersleutel Gebruiksaanwijzing E Llave de Impacto Manual de Instrucciones P Chave de Impacto Manual de Instruço˜ es DK Slagnøgle Brugsanvisning S Slående Mutterdragare Bruksanvisning N Slagmuttertrekker Bruksanvisning SF Iskuväännin Käyttöohje GR ∫ÚÔ˘ÛÙÈÎfi∫ÏÂȉ› √‰ËÁ›Â˜ ¯Ú‹Ûˆ˜ 6904VH 6905H

Makita 6904VH Instruction manual [PDF] (44 pages)

  • Identifier: id-1081288
  • Brand: Makita
  • Device: 6904VH Impact Driver
  • Type: PDF
  • Key Aspects: Component Overview and Descriptions, Model Variations and Compatibility, Hardware Setup Instructions
  • UPD Date: 26.05.2026
  • Source File: 1077112.pdf
  • Pages: 44
  • Description: Device setup guide for the Makita 6904VH.
Pages Preview:
  • 2 1 1 002311 1 2 002322 1 3 002323 1 4 002329 1 2 5 002335 1 2 3 6 005300 7 002371
  • 3 ENGLISH (Original instructions) Explanation of general view 1-1. Switch trigger 2-1. Reversing switch 3-1. Reversing switch 4-1. Speed change lever 5-1. Socket 5-2. Anvil 6-1. Socket 6-2. O-ring 6-3. Pin SPECIFICATIONS Model 6904VH 6905H Standard bolt M10 - M16 M12 - M20 High tensile bolt M10 - M12 M12 - M16 Wood screw 6 mm x 100 mm - Capacities Self-drilling screw 6 mm - Square drive 12.7 mm 12.7 mm High: 0 - 2,400 2,200 No load speed (min-1) Low: 0 - 2
  • 4 used. • Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). ENH101-15 For European countries only EC Declaration of Conformity We Makita Corporation as the responsible manufacturer declare that the following Ma
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 GB Impact Wrench INSTRUCTION MANUAL UA Ударний гайковерт ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ PL Klucz udarowy INSTRUKCJA OBSŁUGI RO Maşină de înşurubat cu impact MANUAL DE INSTRUCŢIUNI DE Schlagschrauber BEDIENUNGSANLEITUNG HU Ütve csavarbehajtó HASZNÁLATI KÉZIKÖNYV SK Nárazový uťahovač NÁVOD NA OBSLUHU CZ Rázový utahovák NÁVOD K OBSLUZE 6904VH 6905H

Makita 6904VH Instruction manual [PDF] (12 pages)

  • Identifier: id-1081289
  • Brand: Makita
  • Device: 6904VH Impact Driver
  • Type: PDF
  • Key Aspects: Glossary of Technical Terms, Step-by-Step Assembly Procedures, Manufacturer Contact and Support Data
  • UPD Date: 17.07.2026
  • Source File: 1077111.pdf
  • Pages: 12
  • Description: Device maintenance guide for the Makita 6904VH.
Pages Preview:
  • 2 ENGLISH (Original instructions) SPECIFICATIONS Model 6904VH 6905H Standard bolt M10 - M16 M12 - M20 High tensile bolt M10 - M12 M12 - M16 Wood screw 6 mm x 100 mm - Capacities Self-drilling screw 6 mm - Square drive 12.7 mm 12.7 mm High: 0 - 2,400 2,200 No load speed (min-1) Low: 0 - 2,100 - High: 0 - 3,000 2,600 Impacts per minute Low: 0 - 2,500 - High: 196 N.m 294 N.m Max. fastening torque Low: 147 N.m - Overall length 265 mm 275 mm Net weight 1.8 kg 2
  • 3 Model 6905H Work mode : impact tightening of fasteners of the maximum capacity of the tool Vibration emission (ah) : 6.0 m/s2 Uncertainty (K) : 1.5 m/s2 ENG901-1 • The declared vibration emission value has been measured in accordance with the standard test method and may be used for comparing one tool with another. • The declared vibration emission value may also be used in a preliminary assessment of exposure. WARNING: • The vibration emission dur
  • 4 a cord suitable for outdoor use reduces the risk of electric shock. 9. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 10. Use of power supply via a RCD with a rated residual current of 30mA or less is always recommended. Personal safety 11. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a
  • 5 WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action 1 002311 CAUTION: • Before pluggi
  • 6 ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Selecting correct socket Always use the correct size socket for bolts and nuts. An incorrect size socket will result in inaccurate and inconsistent fastening torque and/or damage to the bolt or nut. Installing or removing socket 1 2 002335 1. For socket without O-ring and pin To install the socket, push it onto the anvil of the tool
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 ENGLISH (Original instructions) INSTRUCTION MANUAL DOUBLE INSULATION IMPORTANT: Read Before Using. Impact Wrench 6904VH 6905H 005299

Makita 6904VH Instruction manual [PDF] (12 pages)

  • Identifier: id-1081291
  • Brand: Makita
  • Device: 6904VH Impact Driver
  • Type: PDF
  • Key Aspects: Operational Mode Explanations, Component Overview and Descriptions, Documentation and Revision History
  • UPD Date: 11.06.2026
  • Source File: 1077109.pdf
  • Pages: 12
  • Description: Quick reference guide for the Makita 6904VH.
Pages Preview:
  • IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2. 3. 4. 5. 6. 7 . 8. 9. 10. 11. 12. 13. 2 KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. CONSIDER WORK AREA ENVIRONMENT. Don't use power tools in damp or wet locations. Keep work area well l
  • 14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in. 16. EXTENSION CORDS. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord
  • VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool. If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltage less than the nameplate rating is harmful to the motor. ADDITIONAL
  • Selecting correct socket Always use the correct size socket for bolts and nuts. An incorrect size socket will result in inaccurate and inconsistent fastening torque and/or damage to the bolt or nut. Refer to accessories section for socket size. Installing or removing socket CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the socket. To install the socket, push it onto the anvil of the tool until it locks i
  • Reversing switch action I \ \ This tool has a reversing switch to change the direction of rotation. Press the upper side (FWD side) of the switch for clockwise rotation or the lower side (REV side) of switch for counterclockwise rotation. Counterclockwis CAUTION : 0 Always check the direction of rotation before operation. *Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may dam
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Imnact Wrench No load speed (RPM) I- 12.7 mm (1/2") MODEL 6904VH Fastening torque INSTRUCTION MANUAL High DOUBLE INSULATION LOW High LOW SPECIFICATIONS 0 - 2 , 4 0 0 0 - 2,100 2,000 kg cm 1145 ff.lbs) 1 , 5 0 0 kg.cm 1109 f t Ibs) 265 mm 110~318"l capacmes impacts per mmute 1 8 k g 14 0 lbsl x Manufacturer reserves the right to change specifications without notice. * Note: Specifications may differ from country to country.

Makita 6904VH Instruction manual [PDF] (64 pages)

  • Identifier: id-1137037
  • Brand: Makita
  • Device: 6904VH Impact Driver
  • Type: PDF
  • Key Aspects: Component Longevity Optimization, Model Variations and Compatibility, Device Specifications Overview
  • UPD Date: 30.07.2026
  • Source File: 1021358.pdf
  • Pages: 64
  • Description: Device technical manual for the Makita 6904VH.
Pages Preview:
  • 2 3 2 1 4 7 5 6 7 6 5 8 1 2 3 4 5 6
  • 3 ENGLISH Explanation of general view 1 O-ring 2 Socket 3 Pin 4 Switch trigger 5 Clockwise 6 Counterclockwise 7 Reversing switch 8 Speed change lever SPECIFICATIONS Model 6904VH 6905H Capacities Standard bolt ..................................................................... M10 – M16 M12 – M20 High tensile bolt ................................................................ M10 – M12 M12 – M16 Wood screw .......................................
  • 4 For 6905H To start the tool, simply pull the trigger. Release the trigger to stop. Reversing switch action For 6904VH (Fig. 3) This tool has a reversing switch to change the direc- tion of rotation. Press the upper side (FWD side) of the switch for clockwise rotation or the lower side (REV side) of switch for counterclockwise rotation. For 6905H (Fig. 4) This tool has a reversing switch to change the direc- tion of rotation. Press the right side (F side)
Document Preview & Text Transcription (Main Page)
Click to expand and read text
GB Impact Wrench Instruction Manual F Boulonneuse à Chocs Manuel d’instructions D Schlagschrauber Betriebsanleitung I Avvitatrici ad Impulso Istruzioni per l’uso NL Slagmoersleutel Gebruiksaanwijzing E Llave de Impacto Manual de instrucciones P Chave de Impacto Manual de instruções DK Slagnøgle Brugsanvisning S Slående Mutterdragare Bruksanvisning N Slagmuttertrekker Bruksanvisning SF Iskuväännin Käyttöohje GR Κρ�υστικ� Κλειδί �δηγίες �ρήσεως 6904VH 6905H

Makita 6904VH Instruction manual [PDF] (40 pages)

  • Identifier: id-1137038
  • Brand: Makita
  • Device: 6904VH Impact Driver
  • Type: PDF
  • Key Aspects: Risk Mitigation and Accident Prevention, Efficiency and Calibration Tips, Advanced Configuration Methods
  • UPD Date: 30.03.2026
  • Source File: 1021357.pdf
  • Pages: 40
  • Description: Advanced user manual for the Makita 6904VH.
Pages Preview:
  • 2 1 1 002311 1 2 002322 1 3 002323 1 4 002329 1 2 5 002335 1 2 3 6 005300 7 002371
  • 3 ENGLISH Explanation of general view 1-1. Switch trigger 2-1. Reversing switch 3-1. Reversing switch 4-1. Speed change lever 5-1. Socket 5-2. Anvil 6-1. Socket 6-2. O-ring 6-3. Pin SPECIFICATIONS Model 6904VH 6905H Standard bolt M10 - M16 M12 - M20 High tensile bolt M10 - M12 M12 - M16 Wood screw 6 mm x 100 mm - Capacities Self-drilling screw 6 mm - Square drive 12.7 mm 12.7 mm High: 0 - 2,400 2,200 No load speed (min-1) Low: 0 - 2,100 - High: 0 - 3,000 2
  • 4 Conforms to the following European Directives: 98/37/EC until December 28th 2009 and then with 2006/42/EC from 29th December 2009 And are manufactured in accordance with the following standards or standardised documents: EN50144, EN60745 The technical documentation is kept by our authorised representative in Europe who is: Makita International Europe Ltd, Michigan, Drive, Tongwell, Milton Keynes, MK15 8JD, England 19th November 2008 000230 Tomoyasu Kato
  • 5 ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Selecting correct socket Always use the correct size socket for bolts and nuts. An incorrect size socket will result in inaccurate and inconsistent fastening torque and/or damage to the bolt or nut. Installing or removing socket Fig.5 1. For socket without O-ring and pin To install the socket, push it onto the anvil of the tool until
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 GB Impact Wrench INSTRUCTION MANUAL UA Ударний гайковерт ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ PL Klucz udarowy INSTRUKCJA OBSŁUGI RO Maşină de înşurubat cu impact MANUAL DE INSTRUCŢIUNI DE Schlagschrauber BEDIENUNGSANLEITUNG HU Ütve csavarbehajtó HASZNÁLATI KÉZIKÖNYV SK Nárazový uťahovač NÁVOD NA OBSLUHU CZ Rázový utahovák NÁVOD K OBSLUZE 6904VH 6905H

Makita 6904VH Instruction manual [PDF] (32 pages)

  • Identifier: id-1228681
  • Brand: Makita
  • Device: 6904VH Impact Driver
  • Type: PDF
  • Key Aspects: Standard Operating Procedures, Common Issue Diagnostic Flows, System Limitations and Considerations
  • UPD Date: 05.07.2026
  • Source File: 929592.pdf
  • Pages: 32
  • Description: Operating manual for the Makita 6904VH.
Pages Preview:
  • 2 1 3 5 2 4 6 3 2 1 7 5 6 8 4 7 6 5
  • 3 Symbols The following show the symbols used for the tool. Be sure that you understand their meaning before use. Symbole Die folgenden Symbole werden für die Maschine verwendet. Machen Sie sich vor der Benutzung unbedingt mit ihrer Bedeutung vertraut. Symbole Poniższe symbole używane są do opisu urządzenia. Przed użyciem należy upewnić się, że rozumie się ich znaczenie. Символы Следующие объяснения показывают
  • 4 ENGLISH Explanation of general view 1 O-ring 2 Socket 3 Pin 4 Switch trigger 5 Clockwise 6 Counterclockwise 7 Reversing switch 8 Speed change lever SPECIFICATIONS Model 6904VH 6905H Capacities Standard bolt ..................................................................... M10 – M16 M12 – M20 High tensile bolt ................................................................. M10 – M12 M12 – M16 Wood screw ......................................
  • 5 13. Don’t overreach Keep proper footing and balance at all times. 14. Maintain tools with care Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and, if damaged, have repaired by authorized service facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean and free from oil and grease. 15. Disconnect tools When no
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Impact Wrench Instruction Manual Schlagschrauber Betriebsanleitung Klucz udarowy Instrukcja obsługi Гаечный ключ ударного действия Инструкция по эксплуатации 6904VH 6905H

Makita 6904VH Instruction manual [PDF] (56 pages)

  • Identifier: id-1981561
  • Brand: Makita
  • Device: 6904VH Impact Driver
  • Type: PDF
  • Key Aspects: Detailed Installation Instructions, Manufacturer Contact and Support Data, Troubleshooting Information
  • UPD Date: 16.08.2026
  • Source File: 2306298.pdf
  • Pages: 56
  • Description: Product operation guide for the Makita 6904VH.
Pages Preview:
  • 2 1 1 002311 1 2 002322 1 3 002323 1 4 002329 1 2 5 002335 1 2 3 6 005300 7 002371
  • 3 ENGLISH (Original instructions) Explanation of general view 1-1. Switch trigger 2-1. Reversing switch 3-1. Reversing switch 4-1. Speed change lever 5-1. Socket 5-2. Anvil 6-1. Socket 6-2. O-ring 6-3. Pin SPECIFICATIONS Model 6904VH 6905H Standard bolt M10 - M16 M12 - M20 High tensile bolt M10 - M12 M12 - M16 Wood screw 6 mm x 100 mm - Capacities Self-drilling screw 6 mm - Square drive 12.7 mm 12.7 mm High: 0 - 2,400 2,200 No load speed (min-1) Low: 0 - 2
  • 4 WARNING: • The vibration emission during actual use of the power tool can differ from the declared emission value depending on the ways in which the tool is used. • Be sure to identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigge
  • 5 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Switch action Fig.1 CAUTION: • Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the
  • 6 N m 260 (188) 240 (174) 220 (159) 200 (145) 180 (130) 160 (116) 140 (101) 120 (87) 100 (72) 80 (58) 60 (43) 40 (29) 20 (14) 0 1 2 3 (S) M16X50 at high speed M16X50 at low speed M12X50 at high speed M12X50 at low speed M10X50 at low speed M10X50 at high speed Fastening time Fastening torque 4 5 6 High tensile bolt M16 M12 M10 Proper fastening torque For 6904VH . 005302 Hold the tool firmly and place the socket over the bolt or nut. Turn the tool on and fa
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 GB Impact Wrench INSTRUCTION MANUAL SI Udarni vijačnik NAVODILO ZA UPORABO AL Çelësi i impaktit MANUALI I PËRDORIMIT BG Ударен гайковерт РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ HR Udarni ključ PRIRUČNIK S UPUTAMA MK Ударен одвртувач УПАТСТВО ЗА УПОТРЕБА RO Maşină de înşurubat cu impact MANUAL DE INSTRUCŢIUNI RS Ударни кључ УПУТСТВО ЗА УПОТРЕБУ RUS Ударный гайковерт РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ UA Ударний гайкокрут ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ 6904VH 6905H
More Documents for Makita 6904VH
Document Pages
Makita 6904VH Instruction manual 72
Makita 6904VH Instruction manual 16

6904VH: Related Instructions

HM1201
Makita HM1201
11.04.2026 28 pages

Demolition Hammer Instruction manual 电镐 使用说明书 Mesin Bobok Petunjuk penggunaan Tukul Meroboh Manual arahan Máy Đục Bê Tông Cầm Tay Hoạt � User setup guide for the Makita HM1201 Power Hammer. The manual provides technical details on repair references, specifications, troubleshooting, performance details.

HR4510C
Makita HR4510C
08.08.2026 52 pages

1 GB Rotary Hammer INSTRUCTION MANUAL UA Перфоратор ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ PL MŁOT UDAROWO-OBROTOWY INSTRUKCJA OBSŁUGI RO Product instruction manual for the Makita HR4510C Rotary Hammer. The guide describes usage and product handling, safety, installation support, operational procedures.

DLS713
Makita DLS713
20.07.2026 76 pages

INSTRUCTION MANUAL MANUEL D'INSTRUCTION MANUAL DE INSTRUCCIONES Cordless Slide Compound Miter Saw Scie Radiale Sans Fil Sierra de Inglete Telescópica Inalámbr Device instruction guide for the Makita DLS713 Saw. It explains operation, maintenance, and power management, installation support, basic operation.

DTD170
Makita DTD170
16.03.2026 60 pages

DTD170 EN Cordless Impact Driver INSTRUCTION MANUAL 4 SV Batteridriven slagskruvdragare BRUKSANVISNING 11 NO Batteridrevet slagskrutrekker BRUKSANVISNING 18 FI Detailed operating instructions for the Makita DTD170 Impact Driver. It details operating modes and setup guidelines, wiring setup, service procedures, operating instructions.

DCS230T
Makita DCS230T
19.07.2026 120 pages

GB Instruction Manual (Page 15 – 22) F Manuel d’instructions (Page 23 – 31) D Betriebsanleitung (Seite 32 – 40) I Istruzioni per l’uso (Pagina 41 – Device instruction manual for the Makita DCS230T Chainsaw. The manual guides users through power management, maintenance guidelines, system configuration.

UC014G
Makita UC014G
27.08.2026 24 pages

INSTRUCTION MANUAL Cordless Chain Saw UC014G UC015G UC016G UC017G ENGLISH: Original instructions Read before use. User operation guide for the Makita UC014G Chainsaw. The manual guides users through maintenance schedule, functional overview, service instructions, operating guidelines.

Similar Manuals in the Impact Driver Category

XPH07
Makita XPH07
01.06.2026 32 pages

1 INSTRUCTION MANUAL MANUEL D'INSTRUCTION MANUAL DE INSTRUCCIONES IMPORTANT: Read Before Using. IMPORTANT: Lire avant usage. IMPORTANTE: Leer antes de usar. Cor Product documentation for the Makita XPH07 Drill. It includes maintenance procedures and backup procedures, adjustment procedures, hardware instructions.

W2910
Atlas Copco W2910
29.08.2026 16 pages

W2910 Printed Matter No. 9834 4666 01 Impact Wrench Publication Date 2020-02-21 Valid from Serial No. A2410001 Product Instructions W2910 8434124850 WARNING Rea Product operation manual for the Atlas Copco W2910 Impact Driver. The document highlights operating procedures and calibration steps, troubleshooting, device reset instructions.

LXT BTD141Z
Makita LXT BTD141Z
24.04.2026 2 pages

18V LXT LITHIUM-ION CORDLESS IMPACT DRIVER INDUSTRY LEADER - UPGRADED POWER POWER Makita built 4-pole motor delivers 1,330 in.lbs.of max torque; (0-2,300 RPM an Complete user documentation for the Makita LXT BTD141Z Impact Driver. This manual provides information on maintenance guidelines, device operation tips, performance guidelines.

XDT11
Makita XDT11
03.08.2026 132 pages

User instruction manual for the Makita XDT11 Impact Driver. The manual outlines system configuration and wiring diagrams, performance optimization, repair references, performance details.