Makita BDF446 Manuals

5 pdf manual(s) Makita BDF446 for free download (Document Types: Instruction manual, Technical information)

Makita BDF446 Instruction manual [PDF] (12 pages)

  • Identifier: id-554314
  • Brand: Makita
  • Device: BDF446 Drill
  • Type: PDF
  • Key Aspects: End-of-Life Handling and Disposal, Operational Mode Explanations, Routine Functionality Testing
  • UPD Date: 28.05.2026
  • Source File: 541593.pdf
  • Pages: 12
  • Description: Complete operating guide for the Makita BDF446.
Pages Preview:
  • 2 ENGLISH (Original instructions) SPECIFICATIONS Model BDF446 BDF456 Steel 13 mm 13 mm Wood 38 mm 38 mm Wood screw 6 mm x 75 mm 10 mm x 89 mm Capacities Machine screw M6 M6 High (2) 0 - 1,500 0 - 1,500 No load speed (min-1) Low (1) 0 - 400 0 - 400 Overall length 192 mm 192 mm Net weight 1.7 kg 1.5 kg (with battery BL1815) 1.7 kg (with battery BL1830) Rated voltage D.C. 14.4 V D.C. 18 V • Due to our continuing programme of research and development, the sp
  • 3 Conforms to the following European Directives: 2006/42/EC And are manufactured in accordance with the following standards or standardised documents: EN60745 The technical documentation is kept by our authorised representative in Europe who is: Makita International Europe Ltd. Michigan Drive, Tongwell, Milton Keynes, MK15 8JD, England 28. 10. 2010 000230 Tomoyasu Kato Director Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN GEA006-2 General P
  • 4 hazards. Power tool use and care 17. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 18. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. 19. Disconnect the plug from the power source and/or the battery pack from the powe
  • 5 ENC007-7 IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2. Do not disassemble battery cartridge. 3. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 4. If electrolyte gets into your eyes, rinse the
  • 6 The tool stops during operation when the tool and/or battery are placed under the following situation. This is caused by the activation of protection system and does not show the tool trouble. • When the tool is overloaded: At this time, release the switch trigger, remove the battery cartridge and remove causes of overload and then pull the switch trigger again to restart. • When battery cells get hot: If any operation of the switch trigger, the moto
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 ENGLISH (Original instructions) INSTRUCTION MANUAL IMPORTANT: Read Before Using. Cordless Driver Drill BDF446 BDF456 011360

Makita BDF446 Instruction manual [PDF] (28 pages)

  • Identifier: id-1003302
  • Brand: Makita
  • Device: BDF446 Drill
  • Type: PDF
  • Key Aspects: Best Practices for Everyday Use, Technical Support and Resource Links, Component Longevity Optimization
  • UPD Date: 04.06.2026
  • Source File: 1155183.pdf
  • Pages: 28
  • Description: Instruction booklet for the Makita BDF446.
Pages Preview:
  • 2 1 011830 2 011389 3 011362 4 011373 5 011363 6 011364 7 011832 8 011366 1 2 3 4 5 6 7 A B 8 9 10 11 12
  • 3 9 011368 10 011367 11 011369 12 006258 13 011370 14 011371 15 011372 16 006304 13 14 15 16 17 18 19 15 20 21 22 23 24 23
  • 4 ENGLISH Explanation of general view SPECIFICATIONS • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Specifications and battery cartridge may differ from country to country. • Weight, with battery cartridge, according to EPTA-Procedure 01/2003 END004-4 Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. ...
  • 5 8. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. 9. If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock. Personal safety 10. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not u
Document Preview & Text Transcription (Main Page)
Click to expand and read text
GB Cordless Driver Drill Instruction manual ID Bor Obeng Tanpa Kabel Petunjuk penggunaan VI Máy khoan & vһn vít chҥy pin Tài liӋu hѭӟng dүn TH ­ªnµœÅ…‡ªŠÂÅ¦o­µ¥ ‡¼n¤º°„µ¦ÄoŠµœ BDF446 BDF456

Makita BDF446 Instruction manual [PDF] (52 pages)

  • Identifier: id-2154990
  • Brand: Makita
  • Device: BDF446 Drill
  • Type: PDF
  • Key Aspects: Device Specifications Overview, Operational Mode Explanations, Component Overview and Descriptions
  • UPD Date: 30.04.2026
  • Source File: 2132645.pdf
  • Pages: 52
  • Description: Device technical manual for the Makita BDF446.
Pages Preview:
  • 2 1 2 3 1 011830 1 2 011389 1 3 011362 1 4 011373 1 A B 5 011363 1 6 011364 1 2 3 7 011832 1 8 011366 1 2 3 9 011368 1 2 10 011367 11 011369 1 12 006258
  • 3 1 2 13 011370 1 2 3 14 011371 1 15 011372 1 2 16 006304
  • 4 ENGLISH (Original instructions) Explanation of general view 1-1. Red indicator 1-2. Button 1-3. Battery cartridge 2-1. Star mark 3-1. Switch trigger 4-1. Lamp 5-1. Reversing switch lever 6-1. Speed change lever 7-1. Adjusting ring 7-2. Graduation 7-3. Arrow 8-1. Sleeve 9-1. Groove 9-2. Hook 9-3. Screw 10-1. Bit holder 10-2. Bit 12-1. Limit mark 13-1. Rear cover 13-2. Screw 14-1. Recessed part 14-2. Spring 14-3. Arm 15-1. Carbon brush cap 16-1. Hole 16-2.
  • 5 Conforms to the following European Directives: 2006/42/EC And are manufactured in accordance with the following standards or standardised documents: EN60745 The technical documentation is kept by our authorised representative in Europe who is: Makita International Europe Ltd. Michigan Drive, Tongwell, Milton Keynes, MK15 8JD, England 28. 10. 2010 000230 Tomoyasu Kato Director Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN GEA010-1 General P
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 GB Cordless Driver Drill INSTRUCTION MANUAL UA Дриль із бездротовим приводом ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ PL Akum. wiertarko-wkrętarka INSTRUKCJA OBSŁUGI RO Maşină de găurit şi înşurubat cu acumulator MANUAL DE INSTRUCŢIUNI DE Akku-Bohrschrauber BEDIENUNGSANLEITUNG HU Akkumulátoros fúró-csavarbehajtó HASZNÁLATI KÉZIKÖNYV SK Ľahký vŕtací skrutkovač NÁVOD NA OBSLUHU CZ Akumulátorový vrtací šroubovák NÁVOD K OBSLUZE BDF446 BDF456

Makita BDF446 Technical information [PDF] (10 pages)

  • Identifier: id-1003303
  • Brand: Makita
  • Device: BDF446 Drill
  • Type: PDF
  • Key Aspects: System Limitations and Considerations, Product Performance Metrics, Manufacturer Contact and Support Data
  • UPD Date: 05.07.2026
  • Source File: 1155182.pdf
  • Pages: 10
  • Description: User instruction booklet for the Makita BDF446.
Pages Preview:
  • P 2/ 10 Repair CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”. [1] NECESSARY REPAIRING TOOLS [2] LUBRICATIONS [3] DISASSEMBLY/ASSEMBLY [3]-1. Drill Chuck Code No. Description Use for Hex Wrench 10 removing / mounting Drill chuck 1R359 DISASSEMBLING It is not required to lubricate the gear section because the portion is replaced as a factory-lubricated gear unit. Drill chuck removing tool (Use this too
  • P 3/ 10 Repair [3] DISASSEMBLY/ASSEMBLY [3]-1. Drill Chuck (cont.) DISASSEMBLING *Note: The rotational direction is viewed from operator. 1. Grip Hex wrench 10 with Drill chuck and hold Machine. Important: Be sure to hold the grip of Machine tightly with sufficient counterclockwise* force against clockwise* recoil force of Machine. 2. Pull Switch trigger slowly. 3. Spindle rotates counterclockwise* and consequently Drill chuck is removed fr
  • P 4/ 10 Repair [3] DISASSEMBLY/ASSEMBLY [3]-1. Drill Chuck (cont.) ASSEMBLING (3) Tighten Drill chuck. (Fig. 7) Hex wrench 10 Fig. 7 M6x22 Flat head screw 4. Open Keyless drill chuck fully, then drive M6x22 Flat head screw by turning counterclockwise* with Impact driver. Counterclockwise recoil force of Machine *Note: The rotational direction is viewed from operator 1. Grip Hex wrench 10 with Drill chuck and hold Machine. Important: Be
Document Preview & Text Transcription (Main Page)
Click to expand and read text
P 1/ 10 Model No. Description CONCEPT AND MAIN APPLICATIONS Specification Dimensions: mm (") Width (W) Height (H) Length (L) 192 (7-9/16) 79 (3-1/8) 251 (9-7/8) BDF446 Cordless Driver Drill Battery Capacity of drill chuck: mm (") Capacity: mm (") Lock torque: N.m (in.lbs) Electric brake Variable speed control Mechanical speed control Reversing switch Max. fastening torque: N.m (in.lbs) Torque setting Steel Wood Soft joint Hard joint No load speed: min-1=rpm Cell Voltage: V Capacity: Ah High Standard equipment Optional accessories Note: The standard equipment for the tool shown above may vary by country. Fast charger DC18RC Charger DC18SD Charger DC24SC Automotive Charger DC18SE Battery BL1430 Battery BL1430A Drill bits for wood Drill bits for steel Belt clip Bit holder + – bit 2-45 ........ 1 pc Belt clip ............ 1 pc Weight according to EPTA-Procedure 01/2003*2: kg (lbs) Low Max output: W Li-ion Charging time (approx.): min. 22 with DC18RC 14.4 3.0 Yes Yes Yes (2 speed) Yes Yes 1.7 (3.7) 13 (1/2) 38 (1-1/2) 16 stages + drill mode Clutch torque setting: N.m (in.lbs) 1.0 - 5.0 (9 - 44) 45 (400) 30 (270) 44 (390) 0 - 1,500 0 - 400 1.5 (1/16) - 13 (1/2) 250 Model BDF446 is the upgraded version of model BDF442, featuring: • More compact and lightweight design than BDF442 • More comfortable operation will be provided by redesigned ergonomic grip • Compatible with the 14.4V Li-ion batteries equipped with the Battery protection circuit designed to protect the battery from damages due to overdischarge, high temperature or overload current Note: This product is not compatible with 14.4V-1.3Ah battery BL1415. This product is available in the following variations. All models also include the accessories listed below in "Standard equipment". Housing color BDF446RFE (---) DC18RC Model No. Type Quantity Charger Plastic carrying case Battery cover Yes Yes 2 Battery BDF446RFE3 BL1430 DC18RC Yes BDF446RF BL1430 1 1 3 2 0 No No No No No BDF446Z (---) Makita blue Makita blue Makita blue BL1430 DC18RC Makita blue white BDF446RFW PRODUCT LED job light W L H *2 with Battery BL1430 TECHNICAL INFORMATION OFFICIAL USE for ASC & Sales Shop

Makita BDF446 Instruction manual [PDF] (48 pages)

  • Identifier: id-1080992
  • Brand: Makita
  • Device: BDF446 Drill
  • Type: PDF
  • Key Aspects: Efficiency and Calibration Tips, Regulatory Compliance and Standards, Cleaning and Sanitization Methods
  • UPD Date: 06.04.2026
  • Source File: 1077408.pdf
  • Pages: 48
  • Description: User support guide for the Makita BDF446.
Pages Preview:
  • 2 1 2 3 1 011830 1 2 011389 1 3 011362 1 4 011373 1 A B 5 011363 1 6 011364 1 2 3 7 011832 1 8 011366 1 2 3 9 011368 1 2 10 011367 11 011369 1 12 006258
  • 3 1 2 13 011370 1 2 3 14 011371 1 15 011372 1 2 16 006304
  • 4 ENGLISH (Original instructions) Explanation of general view 1-1. Red indicator 1-2. Button 1-3. Battery cartridge 2-1. Star mark 3-1. Switch trigger 4-1. Lamp 5-1. Reversing switch lever 6-1. Speed change lever 7-1. Adjusting ring 7-2. Graduation 7-3. Arrow 8-1. Sleeve 9-1. Groove 9-2. Hook 9-3. Screw 10-1. Bit holder 10-2. Bit 12-1. Limit mark 13-1. Rear cover 13-2. Screw 14-1. Recessed part 14-2. Spring 14-3. Arm 15-1. Carbon brush cap 16-1. Hole 16-2.
  • 5 Conforms to the following European Directives: 2006/42/EC And are manufactured in accordance with the following standards or standardised documents: EN60745 The technical documentation is kept by our authorised representative in Europe who is: Makita International Europe Ltd. Michigan Drive, Tongwell, Milton Keynes, MK15 8JD, England 28. 10. 2010 000230 Tomoyasu Kato Director Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN GEA010-1 General P
  • 6 Tips for maintaining maximum battery life 1. Charge the battery cartridge before completely discharged. Always stop tool operation and charge the battery cartridge when you notice less tool power. 2. Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. 3. Charge the battery cartridge with room temperature at 10 ﾟC - 40 ﾟC (50 ﾟF - 104 ﾟF). Let a hot battery cartridge cool down before charging it. 4. Ch
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 GB Cordless Driver Drill INSTRUCTION MANUAL S Sladdlös borrmaskin BRUKSANVISNING N Batteridrevet boreskrutrekker BRUKSANVISNING FIN Akkuporakone KÄYTTÖOHJE LV Bezvada skrūvgriezis-urbmašīna LIETOŠANAS INSTRUKCIJA LT akumuliatorinis grąžtas NAUDOJIMO INSTRUKCIJA EE Juhtmeta trell-kruvikeeraja KASUTUSJUHEND RUS Аккумуляторная Дрель-шуруповерт РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ BDF446 BDF456

Makita BDF446: Drill Category Related Instructions

PABSP 20-Li B2
Parkside Performance PABSP 20-Li B2
23.07.2026 96 pages

ATORNILLADORA TALADRADORA RECARGABLE DE 20 V / TRAPANO AVVITATORE RICARICABILE 20 V PABSP 20-Li B2 ATORNILLADORA TALADRADORA RECARGABLE DE 20 V Instrucciones de utilización y de seguridad Traducción del manual original TRAPANO AVVITATORE RICARICA User instruction manual for the Parkside Performance PABSP 20-Li B2 Drill. This guide includes startup procedures, service instructions, maintenance, supported accessories.

TBM 220
Proxxon TBM 220
28.03.2026 68 pages

� �� �� �� �� �� DE GB FR IT ES NL DK SE CZ TR PL RU all-guides com Comprehensive guide for the Proxxon TBM 220 Drill. The document details configuration and startup procedures, software installation, product safety.

MDA-50Q
Promac MDA-50Q
05.08.2026 24 pages

1 Mode d‘emploi Bedienungsanleitung Operation manual PROMAC MDA-50Q Perceuse à socle magnétique À lire avant la mise en service puis à conserver! Metall-Kernbohrmaschine Vor Inbetriebnahme Bedienungsanleitung lesen und aufbewahren! Metal Core Drilling Product usage guide for the Promac MDA-50Q Drill. The manual provides information on interface navigation, hardware components, functional overview, usage tips.

BDB 802
Baier BDB 802
18.03.2026 48 pages

Maschinenfabrik OTTO BAIER GmbH Heckenwiesen 26 71679 Asperg Deutschland Tel. +49 (0) 7141 30 32-0 Fax +49 (0) 7141 30 32-43 [email protected] www.baier-tools.com BAIER BDB 802 / BDB 802B Original-Bedienungsanleitung Diamant-Nassbohrmaschine DE Translati Service and user manual for the Baier BDB 802 Drill. This reference manual outlines firmware updates, device overview, error handling.