Makita BO6040 Manuals

17 pdf manual(s) Makita BO6040 for free download (Document Types: Instruction manual, Parts breakdown, Technical information)

Makita BO6040 Instruction manual [PDF] (16 pages)

  • Identifier: id-555299
  • Brand: Makita
  • Device: BO6040 Sander
  • Type: PDF
  • Key Aspects: Model Variations and Compatibility, Technical Support and Resource Links, Initial Startup Checklist
  • UPD Date: 18.08.2026
  • Source File: 542589.pdf
  • Pages: 16
  • Description: User support manual for the Makita BO6040.
Pages Preview:
  • 2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area 1. Keep your work area clean and well lit. Cluttered benches and dar
  • 3 6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 7. Do not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock. 8. When operating a power tool outside, use an outdoor extension cord marked “W-A” or
  • 4 24. When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of electric shock or injury. USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will c
  • 5 SAVE THESE INSTRUCTIONS WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. SYMBOLS USD205-1 The followings show the symbols used for tool. V ....................... volts A ....................... amperes Hz ..................... hertz ................alternating current ....................no load speed ....................Class II Construction .../min................orbits per minu
Document Preview & Text Transcription (Main Page)
Click to expand and read text
I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. w w w. m a k i t a t o o l s . c o m Random Orbit Sander MODEL BO6040 003278 DOUBLE INSULATION

Makita BO6040 Instruction manual [PDF] (16 pages)

  • Identifier: id-555300
  • Brand: Makita
  • Device: BO6040 Sander
  • Type: PDF
  • Key Aspects: Advanced Configuration Methods, Best Practices for Everyday Use, Unpacking and Inspection Guidelines
  • UPD Date: 25.08.2026
  • Source File: 542590.pdf
  • Pages: 16
  • Description: Instruction guide for the Makita BO6040.
Pages Preview:
  • GENERAL SAFETY RULES USA0021 (For All Tools) WARNING! Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS Work Area 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power
  • 11. Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents. 12. Remove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury. 13. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better
  • USBO40-2 Specific Safety Rules 1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a
  • SYMBOLS The followings show the symbols used for tool. v ........................................................ volts A ........................................................ amperes Hz ........................................................ herts ?, ....................................................... alternating current b ........................................................ no load speed .......................................................
  • FUNCTIONAL DESCRIPTION Switch action CAUTION: Before plugging in the tool, always check to see that the switch actuates properly and returns to the
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Random Orbit Sander Pad size 150 mm 16”) MODEL BO6040 Orbits per minute Overall length Net w e i g h t 1,600 - 5,800 316 mm (12-1/2”) 2.7 kg (5.9 Ibs) INSTRUCTION MANUAL DOUBLE INSULATION

Makita BO6040 Instruction manual [PDF] (36 pages)

  • Identifier: id-821018
  • Brand: Makita
  • Device: BO6040 Sander
  • Type: PDF
  • Key Aspects: Additional Modules and Accessories Guide, Standard Operating Procedures, Environmental Factors and Restrictions
  • UPD Date: 28.08.2026
  • Source File: 818744.pdf
  • Pages: 36
  • Description: Instruction guidebook for the Makita BO6040.
Pages Preview:
  • 2 1 1 003287 1 2 003289 1 3 003297 1 4 003302 1 2 3 5 003315 1 2 3 6 003328 1 7 003329 8 003338 1 9 003340 1 10 003342 1 11 003344
  • 3 ENGLISH (Original instructions) Explanation of general view 1-1. Slide switch 2-1. Speed adjusting dial 3-1. Side grip 4-1. Abrasive disc 5-1. Screw 5-2. Hex wrench 5-3. Pad 6-1. Dust outlet 6-2. Cuff 6-3. Hose 7-1. Joint 9-1. Sponge pad 10-1. Felt pad 11-1. Wool pad SPECIFICATIONS Model BO6040 Pad diameter 150 mm Abrasive disc diameter 150 mm Orbits per minute (min-1) 1,600 - 5,800 Overall length 316 mm Net weight 2.8 kg Safety class /II • Due to our
  • 4 The technical documentation is kept by our authorised representative in Europe who is: Makita International Europe Ltd. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, England 30.1.2009 000230 Tomoyasu Kato Director Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi, 446-8502, JAPAN GEA010-1 General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
  • 5 Selecting the action mode 1 Roto-orbit mode 003292 Use the change lever to change the rotation mode. Roto-orbit mode is orbital action plus rotation action of pad for rough sanding and polishing. Random orbit mode is orbital action of pad for fine sanding. 1 Random orbit mode 003293 Rotate the change lever counterclockwise for roto-orbit mode and clockwise for random orbit mode. CAUTION: • Do not rotate the change lever when the tool is running. The to
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 GB Random Orbit Sander INSTRUCTION MANUAL S Excenterslipmaskin BRUKSANVISNING N Eksenterslipemaskin BRUKSANVISNING FIN Epäkeskohiomakone KÄYTTÖOHJE LV Ekscentra slīpmašīna LIETOŠANAS INSTRUKCIJA LT Becentris orbitinis šlifuotuvas NAUDOJIMO INSTRUKCIJA EE Eksentriklihvija KASUTUSJUHEND RUS Эксцентриковая шлифовальная машина РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ BO6040

Makita BO6040 Instruction manual [PDF] (24 pages)

  • Identifier: id-968094
  • Brand: Makita
  • Device: BO6040 Sander
  • Type: PDF
  • Key Aspects: Information on Regular Maintenance, Error Code Explanations, Advanced Configuration Methods
  • UPD Date: 07.09.2026
  • Source File: 1190411.pdf
  • Pages: 24
  • Description: Stepwise user guide for the Makita BO6040.
Pages Preview:
  • 2 ENGLISH (Original instructions) SPECIFICATIONS Model BO6040 Pad size 150 mm (6
  • 3 16. Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 17. Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired. 18. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce t
  • 4 WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. USD205-1 Symbols The followings show the symbols used for tool. ･ volts ･ amperes ･ hertz ･ alternating current ･ no load speed ･ Class II Construction ･ orbits per minute FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Swi
  • 5 Use the change lever to change the rotation mode. Roto-orbit mode is orbital action plus rotation action of pad for rough sanding and polishing. Random orbit mode is orbital action of pad for fine sanding. 1 Random orbit mode 003293 Rotate the change lever counterclockwise for roto-orbit mode and clockwise for random orbit mode. CAUTION: • Do not rotate the change lever when the tool is running. The tool will be damaged. Typical applications for sandin
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 INSTRUCTION MANUAL MANUEL D'INSTRUCTION MANUAL DE INSTRUCCIONES DOUBLE INSULATION DOUBLE ISOLATION DOBLE AISLAMIENTO IMPORTANT: Read Before Using. IMPORTANT: Lire avant usage. IMPORTANTE: Leer antes de usar. Random Orbit Sander Ponceuse Orbitale à Disque Lijadora Orbital BO6040 003278

Makita BO6040 Instruction manual [PDF] (13 pages)

  • Identifier: id-968095
  • Brand: Makita
  • Device: BO6040 Sander
  • Type: PDF
  • Key Aspects: User Training Recommendations, Package Contents and Accessories List, Cleaning and Sanitization Methods
  • UPD Date: 20.07.2026
  • Source File: 1190410.pdf
  • Pages: 13
  • Description: User instructions for the Makita BO6040.
Pages Preview:
  • 2 1 2 4 3 5 6 7 9 8 10 8 11 12 13 1 2 3 4 5 6 7 8
  • 3 14 15 16 17 9 10 11 12 13
  • 4 ENGLISH Explanation of general view 1 Abrasive disc 2 Side grip 3 Screw 4 Pad 5 Hex wrench 6 Switch lever 7 Speed adjusting dial 8 Change knob 9 Roto-orbit mode 10 Random orbit mode 11 Dust outlet 12 Cuff 13 Hose 14 Joint 15 Sponge pad 16 Felt pad 17 Wool pad SPECIFICATIONS Model BO6040 Pad diameter ...................................................... 150 mm Abrasive disc diameter ....................................... 150 mm Orbits per minute .......
  • 5 Speed adjusting dial (Fig. 5) The rotating speed can be changed by turning the speed adjusting dial to a given number setting from 1 to 5. Higher speed is obtained when the dial is turned in the direction of number 5. And lower speed is obtained when it is turned in the direction of number 1. Refer to the table below for the relationship between the number settings on the dial, orbits per minute and the pad rotating speed. CAUTION: • If the tool is ope
Document Preview & Text Transcription (Main Page)
Click to expand and read text
GB Random Orbit Sander Instruction Manual F Ponceuse orbitale à disque Manuel d’instructions D Exzenterschleifer Betriebsanleitung I Levigatrice rotorbitale Istruzioni per l’uso NL Excenter schuurmachine Gebruiksaanwijzing E Lijadora orbital Manual de instrucciones P Lixadeira rotorbital Manual de instruções DK Excentersliber Brugsanvisning S Excenterslipmaskin Bruksanvisning N Eksentersliper Bruksanvisning SF Epäkeskohiomakone Käyttöohje GR Λειαvτής τυ αίας τρ ιάς δηγίες ρήσεως BO6040

Makita BO6040 Instruction manual [PDF] (48 pages)

  • Identifier: id-1004523
  • Brand: Makita
  • Device: BO6040 Sander
  • Type: PDF
  • Key Aspects: Additional Modules and Accessories Guide, Regulatory Compliance and Standards, Glossary of Technical Terms
  • UPD Date: 21.07.2026
  • Source File: 1153962.pdf
  • Pages: 48
  • Description: Instruction manual for the Makita BO6040.
Pages Preview:
  • 2 1 2 4 3 5 6 7 9 8 10 8 11 12 13 1 2 3 4 5 6 7 8
  • 3 14 15 16 17 9 10 11 12 13
  • 4 Symbols The following show the symbols used for the tool. Be sure that you understand their meaning before use. Symboles Nous donnons ci-dessous les symboles utilisés pour l’outil. Assurez-vous que vous en avez bien compris la significa- tion avant d’utiliser l’outil. Symbole Die folgenden Symbole werden für die Maschine verwendet. Machen Sie sich vor der Benutzung unbedingt mit ihrer Bedeutung vertraut. Symboli Per questo utensile vengono usati
  • 5 ENGLISH Explanation of general view 1 Abrasive disc 2 Side grip 3 Screw 4 Pad 5 Hex wrench 6 Switch lever 7 Speed adjusting dial 8 Change knob 9 Roto-orbit mode 10 Random orbit mode 11 Dust outlet 12 Cuff 13 Hose 14 Joint 15 Sponge pad 16 Felt pad 17 Wool pad SPECIFICATIONS Model BO6040 Pad diameter ......................................................150 mm Abrasive disc diameter .......................................150 mm Orbits per minute .........
Document Preview & Text Transcription (Main Page)
Click to expand and read text
GB Random Orbit Sander Instruction Manual F Ponceuse orbitale à disque Manuel d’instructions D Exzenterschleifer Betriebsanleitung I Levigatrice rotorbitale Istruzioni per l’uso NL Excenter schuurmachine Gebruiksaanwijzing E Lijadora orbital Manual de instrucciones P Lixadeira rotorbital Manual de instruções DK Excentersliber Brugsanvisning S Excenterslipmaskin Bruksanvisning N Eksentersliper Bruksanvisning SF Epäkeskohiomakone Käyttöohje GR Λειαvτής τυ αίας τρ ιάς δηγίες ρήσεως BO6040

Makita BO6040 Instruction manual [PDF] (28 pages)

  • Identifier: id-1004524
  • Brand: Makita
  • Device: BO6040 Sander
  • Type: PDF
  • Key Aspects: System Architecture and Design Overview, Control Panel and Interface Navigation, Initial Startup Checklist
  • UPD Date: 01.07.2026
  • Source File: 1153961.pdf
  • Pages: 28
  • Description: Detailed product documentation for the Makita BO6040.
Pages Preview:
  • 2 ENGLISH (Original instructions) SPECIFICATIONS Model BO6040 Pad size 150 mm (6
  • 3 16. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Power tool use and care 17. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 18. Do not use the power tool if the switch does not turn it o
  • 4 WARNING: DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to safety rules for the subject product. MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. USD205-1 Symbols The followings show the symbols used for tool. 읭 volts 읭 amperes 읭 hertz 읭 alternating current 읭 no load speed 읭 Class II Construction 읭 orbits per minute FUNCTIONA
  • 5 Number 1 2 3 4 5 Orbits per min. 1,600 2,100 3,600 5,100 5,800 Roto-orbit pad rotating speed per min. 180 240 420 590 670 003290 CAUTION: • If the tool is operated continuously at low speeds for a long time, the motor will get overloaded and heated up. • The speed adjusting dial can be turned only as far as 5 and back to 1. Do not force it past 5 or 1, or the speed adjusting function may no longer work. The tools equipped with electronic function are
Document Preview & Text Transcription (Main Page)
Click to expand and read text
1 INSTRUCTION MANUAL MANUEL D'INSTRUCTION MANUAL DE INSTRUCCIONES DOUBLE INSULATION DOUBLE ISOLATION DOBLE AISLAMIENTO IMPORTANT: Read Before Using. IMPORTANT: Lire avant usage. IMPORTANTE: Leer antes de usar. Random Orbit Sander Ponceuse Orbitale à Disque Lijadora Orbital BO6040 003278

Makita BO6040 Instruction manual [PDF] (12 pages)

  • Identifier: id-1004525
  • Brand: Makita
  • Device: BO6040 Sander
  • Type: PDF
  • Key Aspects: Technical Support and Resource Links, Troubleshooting Information, System Connectivity and Wiring Basics
  • UPD Date: 02.07.2026
  • Source File: 1153960.pdf
  • Pages: 12
  • Description: Installation reference manual for the Makita BO6040.
Pages Preview:
  • 2 SPECIFICATIONS Model BO6040 Pad diameter .......................................................................................................................................... 150 mm Abrasive disc diameter ........................................................................................................................... 150 mm Orbits per minute ...................................................................................................
  • 3 1 4 3 5 6 7 9 8 10 8 11 12 13 1 2 3 4 5 6 7 8 2
  • 4 14 15 16 17 9 10 11 12 13 Symbols The following show the symbols used for the tool. Be sure that you understand their meaning before use. ❏ Read instruction manual. ❏ DOUBLE INSULATION
  • 5 ENGLISH Explanation of general view 1 Abrasive disc 2 Side grip 3 Screw 4 Pad 5 Hex wrench 6 Switch lever 7 Speed adjusting dial 8 Change knob 9 Roto-orbit mode 10 Random orbit mode 11 Dust outlet 12 Cuff 13 Hose 14 Joint 15 Sponge pad 16 Felt pad 17 Wool pad SAFETY INSTRUCTIONS Warning! When using electric tools, basic safety pre- cautions should always be followed to reduce the risk of fire, electric shock and personal injury, includ- ing the following
  • 6 ADDITIONAL SAFETY RULES ENB042-2 1. Hold the tool firmly. 2. Do not leave the tool running. Operate the tool only when hand-held. 3. This tool has not been waterproofed, so do not use water on the workpiece surface. 4. Ventilate your work area adequately when you perform sanding operations. 5. Always use the correct dust mask/respirator for the material and application you are working with. SAVE THESE INSTRUCTIONS. OPERATING INSTRUCTIONS Installing or re
Document Preview & Text Transcription (Main Page)
Click to expand and read text
DOUBLE INSULATION BO6040 Random Orbit Sander

Makita BO6040 Instruction manual [PDF] (28 pages)

  • Identifier: id-1228816
  • Brand: Makita
  • Device: BO6040 Sander
  • Type: PDF
  • Key Aspects: Package Contents and Accessories List, System Architecture and Design Overview, Cleaning and Sanitization Methods
  • UPD Date: 26.04.2026
  • Source File: 929457.pdf
  • Pages: 28
  • Description: User instruction manual for the Makita BO6040.
Pages Preview:
  • 2 1 2 3 4 5 6 7 8 11 12 13 10 8 9 8 7 6 4 3 5 2 1
  • 3 9 10 11 12 13 17 16 15 14
  • 4 Symbols The followings show the symbols used for the tool. Be sure that you understand their meaning before use. Symbole Die folgenden Symbole werden für die Maschine verwendet. Machen Sie sich vor der Benutzung unbedingt mit ihrer Bedeutung vertraut. Symbole Poniższe symbole używane są do opisu urządzenia. Przed użyciem należy upewnić się, że rozumie się ich znaczenie. Символы Следующие объяснения показываю
  • 5 ENGLISH Explanation of general view 1 Abrasive disc 2 Side grip 3 Screw 4 Pad 5 Hex wrench 6 Switch lever 7 Speed adjusting dial 8 Change knob 9 Roto-orbit mode 10 Random orbit mode 11 Dust outlet 12 Cuff 13 Hose 14 Joint 15 Sponge pad 16 Felt pad 17 Wool pad SPECIFICATIONS Model BO6040 Pad diameter ......................................................150 mm Abrasive disc diameter .......................................150 mm Orbits per minute .........
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Random Orbit Sander Instruction Manual Exzenterschleifer Betriebsanleitung Szlifierka orbitalna Instrukcja obsługi Эксцентриковый шлифовальный станок Инструкция по эксплуатации BO6040

Makita BO6040 Instruction manual [PDF] (40 pages)

  • Identifier: id-1717297
  • Brand: Makita
  • Device: BO6040 Sander
  • Type: PDF
  • Key Aspects: Regulatory Compliance and Standards, Warranty and Service Information, Technical Support and Resource Links
  • UPD Date: 04.04.2026
  • Source File: 1719912.pdf
  • Pages: 40
  • Description: Device setup manual for the Makita BO6040.
Pages Preview:
  • 2 1 2 3 4 5 6 7 8 1 2 3 3 4 5 6 7 8 9 10 11
  • 3 9 10 11 12 13 12 14 13 15
  • 4 ENGLISH (Original instructions) Explanation of general view 1 Slide switch 2 Speed adjusting dial 3 Change lever 4 Side grip 5 Abrasive disc 6 Screw 7 Hex wrench 8 Pad 9 Dust outlet 10 Cuff 11 Hose 12 Joint 13 Sponge pad 14 Felt pad 15 Wool pad SPECIFICATIONS Model BO6040 Pad diameter ...................................................... 150 mm Abrasive disc diameter ....................................... 150 mm Orbits per minute (min–1) ............
Document Preview & Text Transcription (Main Page)
Click to expand and read text
GB Random Orbit Sander Instruction Manual F Ponceuse orbitale à disque Manuel d’instructions D Exzenterschleifer Betriebsanleitung I Levigatrice rotorbitale Istruzioni per l’uso NL Excenter schuurmachine Gebruiksaanwijzing E Lijadora orbital Manual de instrucciones P Lixadeira rotorbital Manual de instruções DK Excentersliber Brugsanvisning GR Λειαvτής τυ αίας τρ ιάς δηγίες ρήσεως BO6040 all-guides com
More Documents for Makita BO6040
Document Pages
Makita BO6040 Instruction manual 12
Makita BO6040 Instruction manual 40
Makita BO6040 Instruction manual 24
Makita BO6040 Instruction manual 28
Makita BO6040 Instruction manual 12
Makita BO6040 Parts breakdown 3
Makita BO6040 Technical information 10

BO6040: Related Instructions

6236DWAE
Makita 6236DWAE
06.05.2026 20 pages

Equipped with Electric Brake MODEL 6236DWAE With High Capacity Battery Charger MODEL 6336DWA, 6336DWAE MODEL 6336DWB, 6336DWBE With High Capacity Battery Charge Device setup guide for the Makita 6236DWAE Drill. The document details configuration and operating instructions, system setup, reset instructions.

XAG24
Makita XAG24
23.04.2026 36 pages

INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES Cordless Angle Grinder Esmeriladora Angular Inalámbrica XAG24 XAG26 IMPORTANT: Read Before Using. IMPORTANTE: Lea an Detailed user guide for the Makita XAG24 Grinder. It covers topics such as software updates, performance optimization, operating guidelines, supported accessories.

DVC261
Makita DVC261
08.08.2026 76 pages

DVC261 EN Cordless Backpack Vacuum Cleaner INSTRUCTION MANUAL 8 PL Akumulatorowy odkurzacz plecakowy INSTRUKCJA OBSŁUGI 16 HU Vezeték nélküli háti porszív Complete user documentation for the Makita DVC261 Vacuum Cleaner. The manual highlights setup validation, security instructions, product specifications.

ER2650LH
Makita ER2650LH
08.07.2026 20 pages

ER2650LH Petrol String Trimmer ER2650LH Important: Read this instruction manual carefully before putting the Petrol String Trimmer into operation and strictly o Full operation manual for the Makita ER2650LH Trimmer. The document elaborates on device functions and error handling, operational procedures, detailing setup.

BO6030
Makita BO6030
29.06.2026 32 pages

Random Orbit Sander Instruction manual 砂光机 使用说明书 Mesin Ampelas Acak Petunjuk penggunaan Máy Chà Nhám Quỹ Đạo Tròn Cầm Tay Hoạt Đ� Device setup guide for the Makita BO6030 Sander. It describes operating procedures and setup guidelines, connectivity options, software updates, internal layout.

DTR180
Makita DTR180
18.05.2026 20 pages

INSTRUCTION MANUAL Cordless Rebar Tying Tool DTR180 ENGLISH: Original instructions Read before use. Quick reference guide for the Makita DTR180 Power Tool. The manual guides users through technical assistance, installation support, operation, performance details.

Similar Manuals in the Grinder, Power Tool, Sander Category

HTBG01
HART HTBG01
18.08.2026 32 pages

HTBG01 6 in. Bench Grinder Meuleuse d’établi de 152 mm (6 po) Esmeriladora de banco de 152 mm (6 pulg.) OPERATOR’S MANUAL General Safety Rules 2-3 Specific Instruction and reference manual for the HART HTBG01 Grinder. It provides guidance on backup procedures, maintenance guidelines, software installation.

52331
Dynabrade 52331
11.06.2026 4 pages

10 01480 Blade (4/pkg.) 11 01476 Cylinder 12 02673 Rear Bearing Plate 13 02696 Bearing 14 02679 Shield 15 01546 Housing 16 01548 Gasket 17 01461 Lock Nut 18 015 Complete instruction guide for the Dynabrade 52331 Grinder. It describes operating procedures and product maintenance, installation, support details, testing procedures.

52256
Dynabrade 52256
16.03.2026 4 pages

Air Motor and Machine Parts Always operate, inspect and maintain this tool in accordance with the Safety Code for portable air tools (ANSI B186.1) and any other Owner’s manual for the Dynabrade 52256 Grinder. This manual elaborates on internal layout, daily usage, safety information, device instructions.

DGA508
Makita DGA508
15.04.2026 88 pages

DGA408 DGA458 DGA508 EN Cordless Angle Grinder INSTRUCTION MANUAL 6 SV Batteridriven vinkelslipmaskin BRUKSANVISNING 16 NO Batteridrevet vinkelsliper BRUKSANVIS Installation instructions for the Makita DGA508 Grinder. It details device setup and setup instructions, safety, application scenarios.