Marathon CL030056 Series Manuals

Jumbo LCD Wall Clock with Temperature & Humidity, 6 Time Zones Model: CL030056 Series PRODUCT OVERVIEW: CLOCK 1. TIME SET button 7. YEAR button 2. ALARM SET button 8. RCC button 3. + button 9. RESET button 4. - button 10. Wall mount hole 5. SNOOZE button 11. Table stand 6. °C / °F slide switch 12. Battery compartment PRODUCT OVERVIEW: DISPLAY Normal Time Mode 1. AM / PM (12-hour format) 2. Time 3. Time zone indicator 4. Low battery indicator 5. DST 6. Signal strength indicator 7. Month-Day | Year 8. Day of the week 9. Temperature 10. Humidity Alarm Time Mode 1. Alarm time 2. Alarm icon / Alarm on 3. Alarm mode indicator GETTING STARTED 1. Remove the battery compartment door. 2. Insert four (4) AA batteries according to the polarity marks (+ and -) on the inside of the compartment. 3. Replace the battery door. 4. Once the batteries are in place, all segments of the LCD display will be lit up before entering radio-controlled time display mode. 5. The radio-controlled (RC) clock will automatically begin scanning for the RC signal after eight (8) seconds. NOTE: If nothing appears on the LCD display after inserting the batteries, press the RESET button using a metal wire. In some cases, you may not receive the signal immediately. Due to atmospheric disturbance, the best reception often occurs at night. DAYLIGHT SAVING TIME (DST) If the DST function is on, the clock will automatically advance the time by one (1) hour in the spring and go back one (1) hour in the fall. The DST function is set to “AUTO” by default. RECEPTION OF RADIO-CONTROLLED (RC) SIGNAL This RC clock includes a built-in receiver which picks up signals from the WWVB station. The clock will automatically set the time, date, and weekday. • The clock will automatically synchronize with the RC signal four (4) times each day (at 2:00 a.m., 8:00 a.m., 2:00 p.m., and 8:00 p.m.) to correct any deviations to the exact time. • Once the clock has successfully synchronized with the RC signal, the signal icon will show. Each synchronization process lasts six (6) to sixteen (16) minutes. • To manually start or stop the RC signal reception, press the RCC button. NOTE: The strength of the RC signal from the transmitter tower may be affected by the clock’s geographical location and/or any buildings nearby. Avoid placing the clock near sources of interference, such as television sets, computers, etc. Avoid placing the clock on or next to metal plates. Placing the clock in closed areas such as airports, basements, tower blocks, factories, etc., are not recommended. SIGNAL RECEPTION INDICATOR The signal indicator displays the RC signal strength in four (4) levels. Flashing wave segments indicate that the RC signal is being received. Signal quality is indicated by the number of wave segments: No signal Weak signal quality Acceptable signal quality Excellent signal quality SETTING THE TIME ZONE This clock displays the time for six (6) different time zones. Please refer to the section “Setting the Time and Calendar” to set the clock’s time zone. Time zone order: PST (Pacific) > MST (Mountain) > CST (Central) > EST (Eastern) > AST (Alaska) > NST (Newfoundland) ENGLISH MANUAL 1