Marley N1011B Manuals

N Series Overhead Infrared Heaters Dear Owner, Congratulations! Thank you for purchasing this new heater by Marley Engineered Products. You have made a wise invest- ment selecting the highest quality product in the heating industry. Please carefully read the installation and maintenance instructions shown in this manual. You should enjoy years of efficient heating comfort with this product from Marley Engineered Products... the industry’s leader in design, manufacturing, quality and service. ... The Employees of Marley Engineered Products Read Carefully - This instruction sheet contains vital infor- mation for the proper installation, use and efficient opera- tion of the heater. Carefully read the manual before installa- tion, operation, or cleaning of the heater. Failure to adhere to the instructions could result in fire, electric shock, death, serious personal injury or property damage. Save these instructions and review frequently for continuing safe opera- tion and instructing future users. RISK OF FIRE, ELECTRICAL SHOCK OR FALLING: 1. To prevent electrical shock, disconnect all power com- ing to heater at main service panel before wiring or ser- vicing. 2. All wiring must be in accordance with the National and Local Electrical Codes and the heater must be ground- ed as a precaution against possible electric shock. 3. Verify the power supply voltage coming to heater matches the ratings printed on the heater nameplate before energizing. 4. This heater is NOT suitable for use in hazardous loca- tions as described by the National Fire Protection Association (NFPA). This heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint or other flammable liquids or stored. 5. Do not use this heater in areas where corrosive agents such as Ammonia • Carbon tetrachloride • Sulphuric acid • Muriatic Acid • Ethylene Dichloride (Mastics-Glues-Adhesives) • Chlorine • Chlorides • Fluorides • Perchlorethylene • Trichlorethylene • Hydrochloric Acid • Halogenated Hydrocarbons • Industrial Caustics. 6. This heater is intended for ceiling installation ONLY. The following clearances MUST be maintained: a) Top of heater to ceiling - 3 in (76 mm). b) Bottom of heater to floor - 10 ft (3048 mm). c) Side of heater to wall - 12 in (305 mm). d) End of heater to wall - 12 in (305 mm). e) Side of heater to side of adjacent heater - 36 in (914 mm). f) End of heater to end of adjacent heater - 36 in (914 mm). 7. Heater MUST be securely fastened to the building structure to prevent it from falling. 8. DO NOT stack or store combustible materials in the radiation path under the heater. At least 5 feet (1524 mm) clearance MUST be maintained between bottom of heater and combustibles stored. 9. Do NOT use as a residential or household heater. Installation & Maintenance Instructions SAVE THESE INSTRUCTIONS WARNING !