Marley UH Series Manuals

1 pdf manual(s) Marley UH Series for free download (Document Types: Installation & maintenance instructions manual)

Marley UH Series Installation & maintenance instructions manual [PDF] (6 pages)

  • Identifier: id-1007366
  • Brand: Marley
  • Device: UH Series Heater
  • Type: PDF
  • Key Aspects: Pre-Installation Safety Requirements, Pre-Deployment Preparation Steps, Troubleshooting Information
  • UPD Date: 15.07.2026
  • Source File: 1151119.pdf
  • Pages: 6
  • Description: Device operation guide for the Marley UH Series.
Pages Preview:
  • INTRODUCTION Congratulations! You have just purchased one of the most ver- satile electric space heaters available. Your new electric unit heater has unmatched operating flexibility. It is designed to meet a variety of heating requirements by simply switching a few easi- ly accessible wires located in the base of the unit (See output ranges in Specifications on page 1). This unique feature lets you use a single unit to meet a wide range of heating applicat
  • 1. Mounting the Bracket Locate a stud in the ceiling and attach the mounting bracket to the ceiling joist as shown in figures 3-A or 3-B. You will need to remove the mounting bracket from the heating unit by loosening the bracket screws with a wrench and slipping the handle off over the screw heads. Remember to place a washer on the screws before you insert them through the holes in the mounting bracket and screw them into the stud. Tighten the screws enou
  • ADJUSTING AIR FLOW DIRECTION You can adjust the direction of air flow by: A. Turning the unit. If the unit has been installed with a single lag bolt, as shown in Figure 6, simply turn the entire unit as needed to adjust air flow. B. Tilting the unit. Loosen the bracket screws, tilt the heater to the desired position, and re-tighten the bracket screws (see Figure 4). NOTE: To tilt the heater it must be mounted in bottom keyhole slots of mounting bracket to
  • Grasp the louver housing on both sides, lift up, and pull out. This provides access to the heating element. Note: Element, limit and fan delay wiring are attached. When removing Bezel Assembly, do so carefully as not to pull wiring loose. Remove dust or lint with a soft brush or a vacuum cleaner. Replace the louver housing and tighten the Phillips head screws. Cleaning the Fan and Motor Remove the protective grille from the rear of the heater. This pro- vi
Document Preview & Text Transcription (Main Page)
Click to expand and read text
Read Carefully - These instructions are written to help you prevent difficulties that might arise during installation of heaters. Studying the instructions first may save you considerable time and money later. Observe the following procedures, and cut your installation time to a minimum. TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK: 1. Use minimum 60° copper wire only. 2. Heater air flow must be directed parallel to, or away from, adjacent walls. 3. Observe wall, floor, and ceiling clearance requirements. 4. All wiring must conform to national and local electrical codes and the heater must be grounded as a precaution against possible electrical shock. Heater circuit must be protected with proper fuses. See Table 1 on page 4. 5. The mounting structure and the anchoring hardware must be capable of reliably supporting the weight of the heater and, if used, the mounting bracket. 6. All electrical power must be disconnected at the main service box before installing, inspecting, cleaning or servicing the heater. This is a precaution to prevent serious electrical shock. Installation & Maintenance Instructions SAVE THESE INSTRUCTIONS UH Series Electric Space Heater WARNING ! FILE #E21609 • Heater is shipped from factory wired for these wattages. Heater can be field adjusted to the other wattages. Refer to “Adjusting the Heat Output” on page 4. •• 48" (1219mm) when heater air flow is between 45° downward and vertical. Heater Rating and Voltage •7500 W @ 240V 6250W @ 240V 5000W @ 240V 3750W @ 240V 1 25,598 21,331 17,065 12,799 Yes 6' (1829) 11' (3353) 6' (1829) 8' (2439) 18' (5486) ••13" (330) 1 19,198 15,990 12,799 9,598 Yes 6' (1829) 11' (3353) 6' (1829) 8' (2439) 18' (5486) ••13" (330) •5625W @ 208V 4685W @ 208V 3750W @ 208V 2812W @ 208V Horizontal Air Throw, ft. (mm) Min. Distance from Mounting Hole to Wall, in (mm) Min. Vertical Installation Horizontal Installation Mounting Height, ft. (mm) Max. Min. Max. Contactor Built-in Phase SPECIFICATIONS: UH724ST BTU per Hr. BTUH

UH Series: Related Instructions

CZ1512T
Marley CZ1512T
29.06.2026 12 pages

WHEN USING ELECTRIC APPLIANCES, BASIC PRECAU- TIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PER- SONS, INCLUDING THE Practical operating guide for the Marley CZ1512T Heater. This documentation guides on software updates, usage examples, system checks, detailing setup.

CLASSIC Series
Marley CLASSIC Series
25.08.2026 26 pages

DE Betriebs-/Montageanleitung GB Operating/assembly instructions SE Bruks-/monteringsanvisning IT Istruzioni per l’uso e il montaggio RU Инструкц User setup guide for the Marley CLASSIC Series Ventilation Hood. This manual outlines installation steps and operating guidelines, installation procedures, safety guidelines.

Liberate
Marley Liberate
06.05.2026 2 pages

1 Liberate Portable Bluetooth® Audio System Advanced user manual for the Marley Liberate Speakers. It covers network setup, software configuration, interface navigation.

UH-524TA
Marley UH-524TA
25.03.2026 4 pages

Model No. UH-524TA Horizontal / Vertical Unit Heater (Field Adjustable from 1.9KW @ 208V to 5KW@ 240V) WARNING Dear Owner, Congratulations! Thank you for purch Stepwise user guide for the Marley UH-524TA Heater. This manual explains setup instructions, connectivity setup, usage tips, service contacts.

WHB1000 Series
Marley WHB1000 Series
14.07.2026 12 pages

WHB1000 Series Fan Forced Wall Heaters WHEN USING ELECTRIC APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, A Instruction and usage manual for the Marley WHB1000 Series Heater. The document provides guidance on safety and operational safety, dimensions and layout, device safety checks, installation procedures.

MD Series
Marley MD Series
06.08.2026 40 pages

MD cooling tower INSTALLATION - OPERATION - MAINTENANCE Z0602117_F ISSUED 8/2018 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT Complete technical documentation for the Marley MD Series Air Conditioner. This reference includes operational guidelines, repair references, setup instructions, software installation.

Similar Manuals in the Heater Category

EVO MAX 100
evoheat EVO MAX 100
07.06.2026 29 pages

P a g e | 1 Product operation manual for the evoheat EVO MAX 100 Heater. This manual covers installation, operation, and usage tips, hardware setup, system checks.

KLEH160-0600
KALOS KLEH160-0600
17.04.2026 9 pages

Headline KLEH160-0600 Assembly Instructions IMPORTANT PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE. THIS IS IMPORTANT INFORMATION REGARDING THE USE AND CARE OF Technical operation manual for the KALOS KLEH160-0600 Heater. This guide provides technical guidance on hardware setup, device overview, usage examples, firmware installation.

8000TEC
Sierra 8000TEC
03.06.2026 14 pages

Full user manual for the Sierra 8000TEC Heater. This guide includes detailed instructions for technical troubleshooting, error handling, troubleshooting tips, operational safety.

AKP 2011/03
Kermi AKP 2011/03
24.08.2026 24 pages

DE – Gebrauchs- und Montageanleitung Flachheizkörper EN – Use and installation instructions for steel panel radiators ES – Instrucciones de montaje y de Product operation guide for the Kermi AKP 2011/03 Heater. This reference includes control functions, device instructions, startup procedures.