Marley WD02112A Manuals

1 pdf manual(s) Marley WD02112A for free download (Document Types: Assembly instruction manual)

Marley WD02112A Assembly instruction manual [PDF] (24 pages)

  • Identifier: id-1083257
  • Brand: Marley
  • Device: WD02112A Heater
  • Type: PDF
  • Key Aspects: Model Variations and Compatibility, Hardware Verification Checklists, Error Code Explanations
  • UPD Date: 10.04.2026
  • Source File: 1075143.pdf
  • Pages: 24
  • Description: Device maintenance guide for the Marley WD02112A.
Pages Preview:
  • INSTALLATION INSTRUCTIONS General Heater Location Instructions: Arrange units so their discharge air streams: A. Are subjected to minimum interference from columns, machinery and partitions. B. Wipe exposed walls without blowing directly at them. C. Are directed away from room occupants in comfort heating. D. Are directed along the windward side when installed in a building exposed to a prevailing wind. if not provided with internal thermostat, locate remo
  • small rooms can be heated by one unit heater. Where two walls are exposed, the heater should be mounted as shown in figure 1. Large rooms require multi-unit installations. Number and capaci- ty of units will be determined by volume of building and square feet of floor area to be heated. Arrange units to provide perimeter air circulation where each unit supports the air stream from another. Mounting Heaters with supplied Universal Mounting Bracket NOTICE
  • 4. Heaters are equipped with fan delay control. This control con- tinues fan operation for a short time after elements are de- energized to dissipate residual heat. Optional Equipment • Built-in Thermostat (bulb and capillary type) for automatic temperature control. The thermostat controls the heating elements and fan simultaneously to achieve set temperature. The Lo setting of the thermostat is approximately 40˚f and the Hi setting is approximately 90
Document Preview & Text Transcription (Main Page)
Click to expand and read text
WD Series Corrosion Resistant Heater SAVE THESE INSTRUCTIONS PPD 40101 03/14 5200-11199-003 Specifications Installation, Operation & Maintenance Instructions Model Output Heater Motor Motor Motor Temp Ship Weight Number KW Volts Phase BTU/HR Amps Volts Phase Amps Rise CFM lbs (kg) WD02112A 2 120 1 6,824 16.7 120 1 1.554 9 700 60 (27.2) WD02812A 2 208 1 6,824 9.6 208 1 0.896 9 700 60 (27.2) WD02212A 2 240 1 6,824 8.3 240 1 0.777 9 700 60 (27.2) WD03112A 3 120 1 10,236 25.0 120 1 1.554 14 700 60 (27.2) WD03812A 3 208 1 10,236 14.4 208 1 0.896 14 700 60 (27.2) WD03212A 3 240 1 10,236 12.5 240 1 0.777 14 700 60 (27.2) WD03712A 3 277 1 10,236 10.8 277 1 0.673 14 700 60 (27.2) WD03832A 3 208 3 10,236 8.3 208 1 0.896 14 700 60 (27.2) WD03232A 3 240 3 10,236 7.2 240 1 0.777 14 700 60 (27.2) WD03432A 3 480 3 10,236 3.6 480 1 0.388 14 700 60 (27.2) WD05812A 5 208 1 17,060 24.0 208 1 0.896 23 700 60 (27.2) WD05212A 5 240 1 17,060 20.8 240 1 0.777 23 700 60 (27.2) WD05712A 5 277 1 17,060 18.1 277 1 0.673 23 700 60 (27.2) WD05412A 5 480 1 17,060 10.4 480 1 0.388 23 700 60 (27.2) WD05832A 5 208 3 17,060 13.9 208 1 0.896 23 700 60 (27.2) WD05232A 5 240 3 17,060 12.0 240 1 0.777 23 700 60 (27.2) WD05432A 5 480 3 17,060 6.0 480 1 0.388 23 700 60 (27.2) WD05632A 5 600 3 17,060 7.2 240 1 1.8 23 1450 75 (34) WD07812A 7.5 208 1 25,590 36.1 208 1 0.896 34 700 60 (27.2) WD07212A 7.5 240 1 25,590 31.3 240 1 0.777 34 700 60 (27.2) WD07712A 7.5 277 1 25,590 27.1 277 1 0.673 34 700 60 (27.2) WD07412A 7.5 480 1 25,590 15.6 480 1 0.388 34 700 60 (27.2) WD07832A 7.5 208 3 25,590 20.8 208 1 0.896 34 700 60 (27.2) WD07232A 7.5 240 3 25,590 18.0 240 1 0.777 34 700 60 (27.2) WD07432A 7.5 480 3 25,590 9.0 480 1 0.388 34 700 60 (27.2) WD07632A 7.5 600 3 25,590 7.2 240 1 1.8 34 1450 75 (34) WD10212A 10 240 1 34,120 41.7 240 1 0.777 22 1450 60 (27.2) WD10712A 10 277 1 34,120 36.1 277 1 0.673 22 1450 60 (27.2) WD10412A 10 480 1 34,120 20.8 480 1 0.388 22 1450 60 (27.2) WD10832A 10 208 3 34,120 27.8 208 1 0.896 22 1450 60 (27.2) WD10232A 10 240 3 34,120 24.1 240 1 0.777 22 1450 60 (27.2) WD10432A 10 480 3 34,120 12.0 480 1 0.388 22 1450 60 (27.2) WD10632A 10 600 3 34,120 9.6 240 1 1.8 33 2400 75 (34) WD12812A 12.5 208 1 42,650 60.1 208 1 1.793 27 1450 60 (27.2) WD12212A 12.5 240 1 42,650 52.1 240 1 1.554 27 1450 60 (27.2) WD12832A 12.5 208 3 42,650 34.7 208 1 1.793 27 1450 60 (27.2) WD12232A 12.5 240 3 42,650 30.1 240 1 1.554 27 1450 60 (27.2) WD12432A 12.5 480 3 42,650 15.0 480 1 0.777 27 1450 60 (27.2) WD12632A 12.5 600 3 42,650 12.0 240 1 1.8 27 2400 75 (34) WD15812A 15 208 1 51,180 72.1 208 1 1.793 20 2400 110 (49.9) WD15212A 15 240 1 51,180 62.5 240 1 1.554 20 2400 110 (49.9) WD15412A 15 480 1 51,180 31.3 480 1 0.777 20 2400 110 (49.9) WD15832A 15 208 3 51,180 41.6 208 1 1.793 20 2400 110 (49.9) WD15232A 15 240 3 51,180 36.1 240 1 1.554 20 2400 110 (49.9) WD15432A 15 480 3 51,180 18.0 480 1 0.777 20 2400 110 (49.9) WD15632A 15 600 3 51,180 14.5 240 1 1.8 20 2400 125 (56.6) WD20412A 20 480 1 68,240 41.7 480 1 0.777 26 2400 120 (54.4) WD20232A 20 240 3 68,240 48.1 240 1 1.554 26 2400 120 (54.4) WD20432A 20 480 3 68,240 24.1 480 1 0.777 26 2400 120 (54.4) WD20632A 20 600 3 68,240 19.3 240 1 1.8 26 2400 135 (61.2) WD25832A 25 208 3 85,300 69.4 208 1 1.793 33 2400 120 (54.4) WD25232A 25 240 3 85,300 60.1 240 1 1.554 33 2400 120 (54.4) WD25432A 25 480 3 85,300 30.1 480 1 0.777 33 2400 120 (54.4) WD25632A 25 600 3 85,300 24.1 240 1 1.8 33 2400 135 (61.2) WD30832A 30 208 3 102,360 83.3 208 1 1.793 39 2400 120 (54.4) WD30232A 30 240 3 102,360 72.2 240 1 1.554 39 2400 120 (54.4) WD30432A 30 480 3 102,360 36.1 480 1 0.777 39 2400 120 (54.4) WD30632A 30 600 3 102,360 28.9 240 1 1.8 39 2400 135 (61.2) WD39432A 39 480 3 133,068 46.9 480 1 0.777 51 2400 120 (54.4) WD39632A 39 600 3 133,068 37.6 240 1 1.8 51 2400 135 (61.2) NOTE: Heaters over 48 amps require supplemental fusing.

Marley WD02112A: Heater Category Related Instructions

CMH Series
Dimplex CMH Series
27.05.2026 3 pages

User documentation for the Dimplex CMH Series Heater. This manual details troubleshooting guides, startup procedures, application scenarios, control functions.

Smith's Solano Eco 1
Swann Smith's Solano Eco 1
28.03.2026 20 pages

Issue 001 - May 2021 | SmithsEP.co.uk | 1 Installation, commissioning and user manual Unit heater Solano® Eco Issue 001 | May 2021 ENGLISH | UK | IRL | SmithsEP.co.uk Complete technical documentation for the Swann Smith's Solano Eco 1 Heater. This manual details setup guidelines, specifications, setup tips.

989E
Skope 989E
10.07.2026 12 pages

989E, 990E, 981E, 723E SKOPE Surface and Recessed Wall Fan Heater Models: Installation and Operating Instructions MAN9800 Rev. 4.0 July 2007 edition Step-by-step user manual for the Skope 989E Heater. This guide elaborates on device features and adjustment procedures, basic operation, setup, usage recommendations.

TRRS series
DeLonghi TRRS series
25.08.2026 7 pages

De’Longhi Appliances via Seitz, 47 31100 Treviso Italia www.delonghi.com 5718510771/09.15_00 Proudly distributed by De’Longhi Australia Pty Limited P.O. BOX 4540 CASULA MALL NSW 2170 Customer Service Ph: 1800 126 659 Fax: 1800 706932 www.delonghi.com. Instruction guide for the DeLonghi TRRS series Heater. The manual describes user preferences, maintenance schedule, reset instructions, safety guidelines.