Martha Stewart Jayco Accent Chair Manuals

Pre-assembly: Take out all parts and hardwares from box. Do not discard any content until assembly completed to avoid accidentally discarding small parts or hardware. Important safety instructions: Please read carefully all instructions before assembling the table. For your safety and ease, assembly by two or more adults is recommended. Keep instructions for future use. H1 H2 H3 LEFT RIGHT 1PC 1PC 1PC 1PC H4 H5 H6 M8*55MM 1PC 8PCS 2PCS M8 (Ø8+Ø21*2MM (Ø8+Ø13)*1.5MM 8PCS M8*30MM 8PCS 4PCS Ø25*5MM H6 H1 H3 H4 100% P1 P2 CHAIR BACKREST CHAIR SEAT Assemble the chair on a flat, soft surface such as a carpet or cloth to prevent scratching.Turn the chair seat(P2) upside down, open the zipper, comfirm direction, put chair seat(P2) on the chair backrest(P1),fully tighten bolts(H1) and washers(H3 and H4） with allen wrench(H6) as illustration below. Page 1 of 4 Jayco Accent Chair (P3)LEFT (P4)RIGHT H6 H2 H3 H4 70% (P3)LEFT Front back P2 P1 H5 Page 2 of 4 Step2.Tear off the cover on the gasket, paste the gasket on both ends of the foots as illustration below. Step3.Place the side of the chair on a level surface, put on the leg, 70% tighten bolts (H2) and washers (H3and H4) with allen wrench (H6) as illustration below. H6 H2 70% (P3)LEFT Front back H6 H2 H3 H4 70% (P4)RIGHT back Front Page 3 of 4 Step4.70% tighten bolts (H2) with allen wrench (H6) as illustration below. Step5.Turn the chair over, put on the leg, 70% tighten bolts (H2) and washers (H3 and H4) with allen wrench (H6) as illustration below. ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE PERIODICALLY INSPECTED AND RE-TIGHTENED TO PREVENT DAMAGE OR INJURY. ALWAYS CHECK TO ENSURE THAT ALL HARDWARE IS KEPT TIGHTENED. H2 70 % H6 (P4)RIGHT back Front P2 100% H6 H6 H2 H3 H4 100% Step6.70% tighten bolts (H2) with allen wrench (H6) as illustration below. Step7. Fully tighten the bolts as illustration below. Page 4 of 4