max mobility smartdrive mx1+ Manuals

User’s Manual 5425 crossings boulevard nashville, tn 37013 usa p: 800.637.2980 f: 888.411.9027 www.max-mobility.com max mobility, llc ® SmartDrive MX1 Rev. MX1.0+ UM-A-SL Wheelchair Power Assist + SmartDrive User’s Manual I Specifi cation Sheet Manufacturer: Max Mobility, LLC Address: 5425 Crossings Blvd. Nashville, TN 37013 USA Rev. ® Range: 10 miles Maximum speed (level surface): 4.5 mph Maximum speed (6o incline): 4.0 mph Motor power: 250 W Motor voltage: 24 V Operating temperature: -25 oC to 50 oC Continuous theoretical driving range: 11.7 W-h/km Maneuvering theoretical range: 18.6 W-h/km Maximum thermal drive test range: 60 minutes / 1522 ft (no failure) Total weight: 19.8 lbs NOTE: Th e stated values are from testing with a 250 lb. occupant. Th e range, speed, etc. vary depending on driving conditions. M X1.0+ SS -A SmartDrive MX1 Drive Unit Model: SD1.0 Overall length: 14.3 in Overall width: 5.5 in Overall height: 9.5 in Weight: 11 lbs Omni-wheel diameter: 7.6 in Omni-wheel width: 2.8 in Battery Unit Model: SB1.0 Battery type: Lithium-Ion (Lithium Iron Phosphate) Nominal operating voltage: 24 V Electric charge: 10 A-h Overall length: 14.9 in Overall width: 6.7 in Overall height: 2.4 in Weight: 8.3 lbs Th e SmartDrive has been tested and conforms to all applicable requirements of ANSI/RESNA Standards for Wheelchairs - Volume 1 and Volume 2. **A wheelchair’s specifi cations provided by its manufacturer may be slightly aff ected by the addition of the SmartDrive.** Wheelchair Compatibility Drive wheel diameter: 22, 24, 25 or 26 in Minimum seat width: 10 in Minimum seat depth: 12 in Maximum seat depth: 20 in User weight: 80 - 250 lbs Wheelchair Power Assist + Spec Sheet II max mobility ® Table of Contents Specification Sheet I Table of Contents II 1. Introduction 1 Intended Use of the SmartDrive. . . . . . . . 1 Must Read Prior-to-Use Information. . . . . . 1 Warnings and Safety Precautions. . . . . . . . 1 Electromagnetic Interference (EMI). . . . . . . 3 List of Components. . . . . . . . . . . . . . 3 2. SmartDrive Set-Up 5 Adaptive Clamp Mounting . . . . . . . . . . . 5 Button Mounting. . . . . . . . . . . . . . . 6 Drive Unit Attachment and Removal. . . . . . 7 Battery Unit Clipping. . . . . . . . . . . . . 8 3. Operating the SmartDrive 10 Power-Assist ON/OFF. . . . . . . . . . . . . 10 Switching Between States. . . . . . . . . . 10 Power-Assist State. . . . . . . . . . . . . . 10 Indoor Mode. . . . . . . . . . . . . . . . 10 Braking. . . . . . . . . . . . . . . . . . . 11 Outdoor Mode. . . . . . . . . . . . . . . . 11 Operating Conditions. . . . . . . . . . . . . 12 4. Battery 12 5. Maintenance 13 Cleaning . . . . . . . . . . . . . . . . . . 13 Roller Lubricating and Replacement. . . . . . 13 Other Maintenance. . . . . . . . . . . . . . 13 6. Warranty 13 Manufacturer’s Contact Information. . . . . . 13 7. EC Authorized Representative 13