Maxford USA Antonov An-2 Manuals

Antonov An 14% Scale Radio Control Model Airplane ARF INSTRUCTION MANUAL E n t i r e c o n t e n t s C o p y r i g h t 2 0 Congratulations on your purchase We invite you to enjoy the pride of ownership and the joy of flying this high quality balsa, composite, TABLE OF CONTENTS History of the Antonov An-2 ............ Important safety precautions .................................. Warranty, liability waiver, and return policy Special features of this An-2 ARF ..... Specifications ....................................................... Page 1 of 13 Antonov An-2 Radio Control Model Airplane ARF INSTRUCTION MANUAL E n t i r e c o n t e n t s C o p y r i g h t 2 0 2 1 M a x f o r d U S A purchase of Maxford USA’s scale Antonov An We invite you to enjoy the pride of ownership and the joy of flying this high composite, and light-ply Almost-Ready-to-Fly aircraft. TABLE OF CONTENTS ............ .................... 2 .................................. 2 Warranty, liability waiver, and return policy ......... 3 ........................ 4 ....................................................... 4 Parts List ............................................................ Assembly instructions ................................ Setup and adjustments ................................ Preflight checks ................................ Radio Control Model Airplane ARF INSTRUCTION MANUAL Antonov An-2 ! We invite you to enjoy the pride of ownership and the joy of flying this high ly aircraft. Parts List ............................................................ 5 ........................................ 6 ..................................... 12 ............................................... 13 Page 2 of 13 HISTORY The Antonov An-2 (nicknamed "Annushka" or "Annie" and NATO reporting name “Colt”) is a single-engine biplane utility and agricultural aircraft that was designed in the USSR in 1946. The AN-2 saw use as a light utility transport, a parachute drop aircraft, an agricultural work aircraft and many other tasks suited to such a large slow-flying biplane. Its slow flight ability made it suited for short, unimproved fields. Some variants were built for cold weather and other extreme environments. The Guinness Book of World Records states that the 45-year production run for the AN-2 was for a time the longest ever, for any aircraft – exceeded only recently by the Lockheed C-130 Hercules. By 1960 the USSR had produced over 5,000 of this aircraft. Since 1960, most AN-2s have been built at Poland's WSK factory in the city of Mielec in south-eastern Poland, with over 13,000 made there before full production ended in 1991. Limited production from parts stocks, as well as spares and maintenance coverage continued until 2001, when four were produced for Vietnam. China also builds the AN-2 under license as the Shijiazhuang Y-5. This RC version we designed is approximately 14% scale, with a 102” wingspan and is designed for the customer’s choice of gas/glow or electric power systems. There are two different color schemes available, Red or Blue at your choice. IMPORTANT SAFETY PRECAUTIONS TO PROTECT YOUR MODEL, YOURSELF & OTHERS 1. This product should not be considered a toy, but rather a sophisticated, working model that functions much like a full-scale airplane. Because of its performance capabilities, this product, if not assembled and operated correctly, could cause injury to you or spectators and damage to property. Maxford USA provides you with a high-quality, thoroughly tested model airplane kit with assembly instructions. However, the quality and capabilities of your finished model airplane depend on how you build it, and your safety depends on how you use and fly it. Any testing or flying of this model airplane is done entirely at your own risk. 2. Assemble the model airplane according to these instructions. We recommend that you do not alter or modify the model, as doing so may result in an unsafe or unworkable model. In a few cases the instructions may differ slightly from the photos; in those instances the written instructions should be considered as correct. If you have any question or concern about these instructions, before you proceed with assembly of this product, contact us at (562) 529-3988, Monday through Friday, except national holidays, between 9 AM to 5 PM Pacific time. 3. It is your responsibility to install the R/C system and other components in such a way that this model airplane passes all applicable safety/range tests and that the power system and controls operate smoothly and correctly. 4. Recheck the operation of this model airplane before every flight to ensure that all equipment is still operating correctly and that the model has remained structurally sound. Also, before every flight check all clevises and other connectors; do not fly without replacing any that you find damaged or defective. 5. If you are not an experienced R/C pilot or have not flown this type of model before, we recommend that you get the assistance of an experienced R/C pilot. 6. Throughout the lifetime of this model, use only the Maxford USA-recommended or same- sized engine or equivalent electric power system and a new or well-maintained R/C radio system and batteries recommended by the maker of the engine (or motor) and radio system. Page 3 of 13 7. LITHIUM BATTERY HANDLING & USAGE: WARNING!! If you use LiPo batteries, read the battery’s instruction sheet or on-line information. Failure to follow all instructions could result in permanent damage to the battery, its surroundings, and bodily harm! If you crash this model airplane, check for battery damage. Do NOT use or charge a damaged Li-Po battery. ONLY use a LiPo approved charger. (NEVER use a NiCd/NiMH charger!) ALWAYS set the charger’s output to match the battery’s voltage and mAh ratings. ALWAYS charge through the battery’s “charge” connector. (NEVER charge through the “discharge” leads.) ALWAYS charge in a fireproof location. NEVER place on combustible materials or leave unattended during charge or discharge. NEVER charge a LiPo battery in excess of 4.2V per cell. NEVER discharge a LiPo battery below 2.5V per cell. NEVER allow battery temp. to exceed 150° F (65° C). NEVER charge at a current greater than 1C (for example, in the case of a 900 mAh battery, that’s 0.9 amps). NEVER trickle charge. NEVER disassemble or modify pack wiring in any way or puncture cells. KEEP BATTERIES OUT OF CHILDREN’S REACH 8. While this kit has been flight-tested to meet or exceed our rigid performance and reliability standards in normal use, if you plan to perform any extremely high-stress flying, such as racing or advanced aerobatics, or if you plan to install a larger engine (or motor) than specified, you (the buyer or user of this product) are solely responsible for taking any and all necessary steps to reinforce the high-stress points and/or substitute hardware that is more suitable for such increased stresses. 9. This model may include fiberglass and/or carbon-fiber reinforced plastic parts that may require some cutting or sanding. Carbon-fiber and fiberglass dust may cause eye, skin and respiratory tract irritation. If you ever grind, drill or sand such parts, always wear safety goggles, a particle mask and rubber gloves; never blow into such a part to remove fiberglass or carbon-fiber dust, as the dust may blow back into your eyes. WARRANTY, LIABILITY WAIVER, AND RETURN POLICY Maxford USA guarantees this kit to be free from defects in material and workmanship at the time of purchase. All of our products have been inspected in our factory and are checked again when shipped from our warehouse. However, Maxford USA cannot directly control the materials you may use nor your final- assembly process. Therefore, Maxford USA can NOT in any way guarantee the performance of your finished model airplane. Furthermore, in purchasing this product, you (the buyer or user of this product) exempt, waive, and relieve Maxford USA from all current or future liability for any personal injury, property damage, or wrongful death, and if you (the buyer or user of this product) are involved in any claim or suit, you will not sue Maxford USA or any of its representatives. If you do not fully accept the above liability and waiver, you may request a return merchandise authorization number (RMA#) as explained in item 2, below. If you think there is a missing part or any shipping damage, please read our after-sales service and return policy as outlined below. 1. Inspect your order upon delivery for any shipping damage or missing part. If you find a problem you must contact us within 10 days from receipt of your purchase by calling (562) 529-3988, Monday through Friday, except holidays, between the hours of 9 AM and 5 PM Page 4 of 13 Pacific time. During this telephone conversation, and with your support, we will determine how to resolve your concern. (NOTE: Maxford USA Li-Po batteries are sold without warranty and are not eligible for return or credit.) 2. To request an RMA#, call (562) 529-3988, Monday through Friday, except holidays, between the hours of 9 AM to 5 PM Pacific time. If we elect to issue you an RMA#, you must clearly mark this RMA# on the outside of the package. (No return or exchange will be authorized after 10 days from the date of your receipt of the product; any package delivered to us without a Maxford USA RMA# is subject to being returned to the sender, as received, with return postage payable upon delivery.) Returned merchandise must be in its original condition as received from Maxford USA, with no assembly or modification, in the original packing materials, complete with all manuals and accessories. Return shipping and insurance charges must be prepaid by you, the buyer. 3. Returned merchandise that is accepted by Maxford USA for credit is subject to a 10% to 20% restocking fee (the final amount will be determined by Maxford USA upon receipt and examination of the returned merchandise). Return Address: Maxford USA RC Model Mfg, Inc. 13630 Imperial Hwy, #11 Santa Fe Springs, CA 90670 IMPORTANT: Print the RMA# issued by Maxford USA on the package near the above address. SPECIAL FEATURES OF 14% AN-2 ARF  All assemblies are pre-covered and required openings are predrilled and/or precut.  The fiberglass cowl and scale look dummy engine are prefinished.  True scale suspension landing gear  Each elevator is separately operated by its own servo.  Scale looking removable canopy  Functional flaps  Easy-remove wings with Max-lok system  Available in 2 different color schemes SPECIFICATIONS* Wingspan .......................................................................................................... 102 inches Wing Area ................................................................................................. 1,969 sq. inches Overall Length ..................................................................................................... 70 inches ARF weight ..................................................................................................... 16.5 pounds Flying weight ........................................................................................ about 20.9 pounds Power System (Not included) ....................... 50cc gas engine or equivalent electric motor Propeller (Not included) ...................................... as-recommended for your power system Radio system (Not included) ....................... Minimum of 5 channels, 7~8 standard servos *(All dimensions and weights are approximate.) PARTS LIST 1. Items you must supply to complete this An-2