Maxim MAX2654 Manuals

Evaluate: MAX2654/MAX2655/MAX2656 MAX2654/MAX2655/MAX2656 Evaluation Kits ________________________________________________________________ Maxim Integrated Products 1 19-1872; Rev 0; 1/01 Component List MAX2654 DESIGNATION QTY DESCRIPTION C1 1 6pF ±0.5pF ceramic capacitor (0402), Murata GRM36COG060D050A C2 1 1.6pF ±0.1pF ceramic capacitor (0402), Murata GRM36COG1R6B050A C3, C8 2 100pF ±5% ceramic capacitors (0603), Murata GRM36COG101J050 C4 1 22pF ±5% ceramic capacitor (0603), Murata GRM36COG220J050 C5 1 4.7µF tantalum capacitor ‘C’ case AVX TAJC475K020 C6 1 Not installed R4 1 0Ω resistor (0603) R5 1 10kΩ ±1% resistor (0402) L1 1 5.6nH inductor Murata LQW1608A5N6C00T1 L2 1 0nH inductor (0402) U1 1 MAX2654EXT 6-pin SC70 RFIN, RFOUT 2 SMA connectors (edge mount) tab contact, EFJohnson 142-0701-851 VCC, GND 2 Test points, Digi-Key 5000K-ND JU1 1 1 ✕ 3 header (0.1in centers) Digi-Key S1012-36-ND JU1 1 Shunt, Digi-Key S9000-ND — 1 MAX2654 EV kit circuit board, rev A Component List MAX2655 DESIGNATION QTY DESCRIPTION C1 1 1800pF ±10% ceramic capacitor (0402), Murata GRM36X7R182K050A C2 1 1.5pF ±0.1pF ceramic capacitor (0603), Murata GRM39COG1R5B050A C3, C8 2 100pF ±5% ceramic capacitors (0402), Murata GRM36COG101J050A C4 1 12pF ±5% ceramic capacitor (0603) Murata GRM39COG120J050A C5 1 4.7µF tantalum capacitor ‘C’ case AVX TAJC475K025 C6 1 Not installed C7 1 27pF ±5% ceramic capacitor (0402) Murata GRM36COG270J050A R1 1 698Ω ±1% resistor (0603) R2 1 511Ω ±1% resistor (0603) R3 1 357Ω ±1% resistor (0603) R4 1 0Ω resistor (0603) R5 1 10kΩ ±1% resistor (0402) L1 1 5.6nH inductor Murata LQW1608A5N6C00T1 For price, delivery, and to place orders, please contact Maxim Distribution at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. General Description The MAX2654/MAX2655/MAX2656 evaluation kits (EV kits) simplify evaluation of the MAX2654/MAX2655/ MAX2656 low-noise amplifiers (LNAs). These kits enable testing of the devices’ performance and require no additional support circuitry. The signal input and out- put use SMA connectors to facilitate connection of RF test equipment. The MAX2654/MAX2655/MAX2656 EV kits are fully assembled with the MAX2654/MAX2655/MAX2656 on board, and incorporate input matching components opti- mized for specific frequency operation. Features o Easy Evaluation of MAX2654/MAX2655/MAX2656 o +2.7V to +5.5V Single-Supply Operation o RF Input and Output Matched to 50Ω o Jumper Included for Gain/Shutdown Setting o Fully Assembled and Tested Ordering Information PART TEMP. RANGE IC PACKAGE MAX2654EVKIT -40°C to +85°C 6 SC70-6 MAX2655EVKIT -40°C to +85°C 6 SC70-6 MAX2656EVKIT -40°C to +85°C 6 SC70-6