Maxon 297080-01 Manuals

LIFT CORPORATION Sht. 1 of 13 DSG# M-16-04 Rev. A Date: 01/13/17 © MAXON Lift Corp. 2017 INSTRUCTION, BMR STREET-SIDE CONTROL GRAVITY DOWN CONTROL KIT, P/N 297080-01 POWER DOWN CONTROL KIT, P/N 297080-02 ELECTRICAL CONTROL TEE P/N 296899-01 QTY. 1 ANGLE, 2” X 2” X 1/8” X 20” LG P/N 263299 QTY. 1 CAP SCREW 1/4”-20 X 1” LG, GRADE 8 P/N 900004-3 QTY. 4 HEX CAP SCREW 3/8”-16 X 1” LG, GRADE 8 P/N 900014-4 QTY. 2 LOCK NUT, 1/4”-20 P/N 901000 QTY. 8 LOCK NUT, 3/8”-16 P/N 901002 QTY. 2 FLAT WASHER, 3/8” P/N 902001-2 QTY. 4 WASHER, 1/4” P/N 903438-01 QTY. 8 PLASTIC ENCLOSURE WITH GRAVITY DOWN CONTROL (-01 KIT) OR POWER DOWN CONTROL (-02 KIT) QTY. 1 ANGLE PLATE P/N 263264-01 QTY. 1 LIFT CORPORATION Sht. 2 of 13 DSG# M-16-04 Rev. A Date: 01/13/17 © MAXON Lift Corp. 2017 OPERATING INSTRUCTIONS DECAL P/N 288968-01 QTY. 1 WARNING DECAL P/N 268416-01 QTY. 1 YELLOW REFLECTIVE TAPE 3” X 1” LG P/N 090175-14 QTY. 1 LIFT CORPORATION Sht. 3 of 13 DSG# M-16-04 Rev. A Date: 01/13/17 © MAXON Lift Corp. 2017 GROMMET (P/N 289848-01) PLASTIC ENCLOSURE (P/N 297210-02) ENCLOSURE ASSEMBLY WITH GRAVITY DOWN CONTROL (-01 KIT) ENCLOSURE ASSEMBLY WITH POWER DOWN CONTROL (-02 KIT) SWITCH ASSEMBLY (P/N 296150-02) POWER DOWN BUTTON SWITCH MOUNTING BRACKET (2 PLACES) (P/N 297374-01) SOCKET SCREW, 1/4”-20 X 1” LG. (2 PLACES) (P/N 900025-1) GROMMET (P/N 289848-01) SWITCH ASSEMBLY (P/N 296150-01) PLASTIC ENCLOSURE (P/N 297210-02) SOCKET SCREW, 1/4”-20 X 1” LG. (2 PLACES) (P/N 900025-1) SWITCH MOUNTING BRACKET (2 PLACES) (P/N 297374-01) BUTTON SCREW, 1/4”-20 X 3/4” LG. (4 PLACES) (P/N 900005-3) & FLAT WASHER, 1/4” (8 PLACES) (P/N 902000-2) & LOCK NUT, 1/4”-20 (4 PLACES) (P/N 901000) BUTTON SCREW, 1/4”-20 X 3/4” LG. (4 PLACES) (P/N 900005-3) & FLAT WASHER, 1/4” (8 PLACES) (P/N 902000-2) & LOCK NUT, 1/4”-20 (4 PLACES) (P/N 901000) LIFT CORPORATION Sht. 4 of 13 DSG# M-16-04 Rev. A Date: 01/13/17 © MAXON Lift Corp. 2017 WIRING HARNESS LOCKING RING CONNECTORS Before connecting, ensure connectors are clean inside. Ensure there is a thin coating of dielectric grease on face of receptacle, and there is no dielectric grease on connector contacts. CAUTION Refer to illustrations below for disconnecting, checking for dielectric grease, and reconnecting locking ring style connectors. ALIGN & CONNECT FIG. 4-5 TURN LOCKING RING TO UNLOCK FIG. 4-1 ALIGN TAB & SLOT PULL CONNECTOR TO DISCONNECT FIG. 4-3 TIGHTEN TO LOCK FIG. 4-6 PULL LOCKING RING TO DISENGAGE FIG. 4-2 DIELECTRIC GREASE ON RECEPTACLE FIG. 4-4 LOCKING RING THIN COAT OF DIELECTRIC GREASE ON SHADED AREA