McAfee IFO-M65K-ISAA - Network Security Platform M-6050 Failover Manuals

This Quick Start Guide explains how to quickly set up and activate your McAfee ® Network Security Platform [formerly McAfee ® IntruShield ®] M-6050 Sensor in in-line mode. If you are setting up your Sensor in SPAN or Tap mode, see the M-6050 Product Guide for cabling instructions. All product documentation referenced in this Quick Start Guide is found on the McAfee Service Portal. The Sensor front panel Cabling the Sensor's XFP (10 Gigabit Small Form-factor Pluggable) and SFP (Small Form-factor Pluggable) Gigabit Ethernet Monitoring ports for in-line mode enables you to configure the Sensor to drop attacks before they reach their target. Sensor setup overview This section explains how to position and cable the various ports of your Sensor. This section also briefly explains how to install the Manager and then add the Sensor to the Manager, and verify that you have successfully established communication between the Sensor and the Manager. 1 Power supply A (included) 6 SFP Gigabit Ethernet Monitoring ports (8) 2 Power supply B (optional; sold separately) 7 XFP 10 Gigabit Ethernet Monitoring ports (8) 3 RS-232C Control port (1) 8 Compact Flash port (1) 4 RS-232C Auxiliary port (1) 9 RJ-45 Response port (1) 5 RJ-11 Fail-Open Control ports (8) 10 10/100/1000 Management port (1) M-6050 Sensor Quick Start Guide Revision A McAfee ® Network Security Platform 1