McAfee IIP-M15K-ISAA - Network Security Platform M-1450 Manuals

This Quick Start Guide explains how to quickly set up and activate your McAfee ® Network Security Platform M-1250/M-1450 Sensor in in-line mode. Cabling the Sensor's Small Form-factor Pluggable (SFP) Gigabit Ethernet Monitoring ports for in-line mode enables you to configure the Sensor to drop attacks before they reach their target. If you are setting up your Sensor in SPAN or Tap mode, see the Sensor's Product Guide for cabling instructions. All product documentation referenced in this Quick Start Guide is found on the McAfee Service Portal. The Sensor panel M-1250/M-1450 Sensor is a 1RU (1 rack unit) and is equipped with the following components: 1 RJ-45 10/100/1000 Management port (1) 5 RJ-45 10/100/1000 Ethernet Monitoring ports (8) 2 RJ-45 Response port (1) 6 External Compact Flash port (1) 3 RS-232C Console port (1) 7 Power supply A (1) 4 RS-232C Auxiliary port (1) Sensor setup overview This section explains how to position and cable the various ports of your Sensor. This section also briefly explains how to install the Manager and then add the Sensor to the Manager, and verify that you have successfully established communication between the Sensor and the Manager. M-1250/M-1450 Sensor Quick Start Guide Revision A McAfee ® Network Security Platform 1