Merit Megatouch Manuals

COPYRIGHT © 2004 MERIT INDUSTRIES, INC. ATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES Removal/Installation of Hard Drive - Megatouch Combo Jukebox Troubleshooting Information - Removal/Installation of Hard Drive - Megatouch Combo Jukebox Megatouch FORCE Technical Reference Manual Hard Drive Removal 1. Turn off the main power switch on the outside of the game. 2. Unlock and remove the rear door, then turn off the internal power switch (located above the cooling fan on the left side). Then unplug the game. 3. Disconnect all connections to the I/O board on the electronics shelf. This will allow for I/O board and hard drive removal. 4. Disconnect the power connector and the ribbon cable from the hard drive. 5. Remove the screw securing the hard drive and I/O board assemblies to the electronics tray and remove them from the unit (see Figure 1). 6. Remove the 4 screws securing the I/O board to the mounting plate above the hard drive and remove the I/O board (see Figure 1). Then remove the 2 screws fastening the I/O board mounting plate to the hard drive and remove the hard drive assembly. 7. Remove the 4 screws and shoulder washers fastening the hard drive to the hard drive mount- ing plate. Hard Drive Installation 1. Fasten the new hard drive to the mounting plate with the 4 screws and shoulder washers. 2. Fasten the I/O board mounting plate to the hard drive assembly with the 2 screws, then fasten the I/O board to the mounting plate with the 4 screws (see Figure 1). 3. Fasten the hard drive and I/O board assemblies to the electronics tray with the mounting screw (see Figure 1). 4. Connect the power connector and ribbon cable to the hard drive. 5. Reconnect all connections to the I/O board. 6. Plug in the game, then turn on the internal power switch and replace and lock the rear door. 7. Turn on the main power switch on the outside of the game.

COPYRIGHT © 2004 MERIT INDUSTRIES, INC. ATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DEVICES Removal/Installation of Motherboard - Megatouch Combo Jukebox Troubleshooting Information - Removal/Installation of Motherboard - Megatouch Combo Jukebox Megatouch FORCE Technical Reference Manual Motherboard Removal 1. Turn off the main power switch on the outside of the game. 2. Unlock and remove the rear door, then turn off the internal power switch (located above the cooling fan on the left side). Then unplug the game. 3. Disconnect all connections to the I/O board. This will allow for I/O board and hard drive re- moval. 4. Disconnect the power connector from the hard drive and the hard drive ribbon cable from the motherboard. 5. Remove the screw securing the hard drive and I/O board assemblies to the electronics tray and remove them from the unit (see Figure 1). 6. Disconnect all connections to the motherboard. 7. Remove the 2 screws securing the centronics ribbon cable and move it aside (see Figure 1). 8. Remove the 4 screws mounting the motherboard to the CPU shelf (see Figure 1) and carefully remove the board. Insert the board into an anti-static bag for storage. NOTE: Be sure to read the Motherboard Handling Precautions before handling the board. Motherboard Installation 1. Fasten the new motherboard to the CPU shelf (see Figure 1) with the 4 screws. 2. Resecure the centronics cable with the 2 screws. 3. Reconnect all connections to the motherboard. 4. Fasten the hard drive and I/O board assemblies to the electronics tray with the mounting screw (see Figure 1). 5. Reconnect the power connector to the hard drive and the hard drive ribbon cable to the motherboard. 6. Reconnect all connections to the I/O board. 7. Plug in the game, then turn on the internal power switch and replace and lock the rear door. 8. Turn on the main power switch on the outside of the game.

PM8923 FOR TECHNICAL ASSISTANCE CONTACT: Merit Industries, Inc. Customer Service Department USA and Canada call toll-free: 1-800-445-9353 Outside the USA and Canada call: (215) 639-4700 FAX: (215) 639-5346 2525 State Rd., P.O. Box 5004, Bensalem, PA 19020-8529