Microdia MMCmicro Manuals

MMCmicroTM OPERATING MANUAL SPECIFICATIONS CONFIRMATION OF PARTS LIST Dimension: 14 (L) x 12 (W) x 1.1 (T) mm Weight: Approx. 0.4g Voltage Performance: 1.7V to 1.95V or 2.7V to 3.6V Temperature Performance: -40°C to +85°C Clock Frequency: Minimum 2.4MB/sec Humidity Performance: 5% to 95%RH MMCmicroTM Card MMCmicroTM Adapter Plastic Case Manual NOTE: Specifications are subject to change without notice. REMOVAL THE PLASTIC CASE FROM BLISTER 1. Hold tight the blister. 2. Hold the blister upside down with about an inch of distance between the blister and the table. 3. Use your fingers to push the edges of the plastic case. 4. Then MMCmicroTM card and adapter with plastic case will drop on the table. Step 1 Step 2 & 3 Step 4 REMOVAL AND STORAGE OF THE MMCmicroTM CARD IN PLASTIC CASE 1. Hold the case with both hands when opening and closing. 2. Unlock and open the lid of the case. 3. Store or remove the MMCmicroTM and adapter card in the tray. Ensure the MMCmicroTM and adapter are placed properly on the tray before closing the case. 4. Lock the plastic case. Step 2 Step 3 PRECAUTIONS FOR HANDLING AND STORAGE • Keep out of the reach of children. Get medical advice immediately if swallowed. • Do not touch the interface pin directly by hands, metal or hard objects. • Do not modify or disassemble the MMCmicroTM card. • Do not wet, heat/fire, impact, drop or bend the MMCmicroTM card. • Do not use or store in a humid and dusty place; in hot place such as inside a hot car, under a blazing sun, near fire, a stove, an air-conditioner outlet, etc. • Do not expose to strong magnet fields, electrical noise and put near corrosive chemicals/gas. This may cause damage through melting or the emission of heat/smoke or cause product failure. • Do not place in cooking appliances such as microwave ovens or high-pressure containers. • Do not detach the label on the MMCmicroTM card and adapter. Do not attach other stickers/labels on the MMCmicroTM card and adapter.

MICRODIA Ltd Email: [email protected] Website: http://www.microdia.com MMCmicroTM OPERATING MANUAL SPECIFICATIONS CONFIRMATION OF PARTS LIST Dimension: 14 (L) x 12 (W) x 1.1 (T) mm Weight: Approx. 0.4g Operating Voltage: 1.7V to 1.95V or 2.7V to 3.6V Operating Temperature: -25°C to +85°C Clock Frequency: Minimum 2.4MB/sec Operating Humidity: 5% to 96%RH MMCmicroTM Card MMCmicroTM Adapter Plastic Case Manual NOTE: Specifications are subject to change without notice. REMOVAL OF THE MMCmicroTM CARD AND ADAPTER FROM BLISTER 1. Hold a corner of the blister. 2. Clap the blister on your palm for removing the plastic case. 3. Hold the blister upside down with about an inch of distance between the blister and the table. 4. Use your finger to push the edge of the MMCmicroTM card and adapter. 5. Then MMCmicroTM card and adapter will drop on the table. Step 1 & 2 Step 3 & 4 Step 5 REMOVAL AND STORAGE OF THE MMCmicroTM CARD IN PLASTIC CASE 1. Hold the case with both hands when opening and closing. 2. Unlock and open the lid of the case. 3. Store or remove the MMCmicroTM and adapter card in the tray. Ensure the MMCmicroTM and adapter are placed properly on the tray before closing the case. 4. Lock the plastic case. Step 2 Step 3 PRECAUTIONS FOR HANDLING AND STORAGE • Keep out of the reach of children. Get medical advice immediately if swallowed. • Do not touch the interface pin directly by hands, metal or hard objects. • Do not modify or disassemble the MMCmicroTM card. • Do not wet, heat/fire, impact, drop or bend the MMCmicroTM card. • Do not use or store in a humid and dusty place; in hot place such as inside a hot car, under a blazing sun, near fire, a stove, an air-conditioner outlet, etc. • Do not expose to strong magnet fields, electrical noise and put near corrosive chemicals/gas. This may cause damage through melting or the emission of heat/smoke or cause product failure. • Do not place in cooking appliances such as microwave ovens or high-pressure containers. • Do not detach the label on the MMCmicroTM card and adapter. Do not attach other stickers/labels on the MMCmicroTM card and adapter. DATA PROTECTION • MICRODIA MMCmicroTM Memory Card comes pre-formatted. Make sure to back up all the data on your MMCmicro card before formatting. • Do not remove the MMCmicroTM card and switch off any equipment using the card when data is being read, written and transferred. It can cause data to be destroyed. • Insert the MMCmicroTM card firmly in the correct orientation. The product will not operate correctly if it is inserted in an incorrect orientation or not inserted all the way. • Parental Guidance is needed when a child uses the MMCmicroTM card. Teach the child how to use and protect the product and insure that the child follows your instructions.

MMCmicroTM OPERATING MANUAL SPECIFICATIONS CONFIRMATION OF PARTS LIST Dimension: 14 (L) x 12 (W) x 1.1 (T) mm Weight: Approx. 0.4g Voltage Performance: 1.7V to 1.95V or 2.7V to 3.6V Temperature Performance: -40°C to +85°C Clock Frequency: Minimum 2.4MB/sec Humidity Performance: 5% to 95%RH MMCmicroTM Card MMCmicroTM Adapter Plastic Case Manual NOTE: Specifications are subject to change without notice. REMOVAL THE PLASTIC CASE FROM BLISTER 1. Hold tight the blister. 2. Hold the blister upside down with about an inch of distance between the blister and the table. 3. Use your fingers to push the edges of the plastic case. 4. Then MMCmicroTM card and adapter with plastic case will drop on the table. Step 1 Step 2 & 3 Step 4 REMOVAL AND STORAGE OF THE MMCmicroTM CARD IN PLASTIC CASE 1. Hold the case with both hands when opening and closing. 2. Unlock and open the lid of the case. 3. Store or remove the MMCmicroTM and adapter card in the tray. Ensure the MMCmicroTM and adapter are placed properly on the tray before closing the case. 4. Lock the plastic case. Step 2 Step 3 PRECAUTIONS FOR HANDLING AND STORAGE • Keep out of the reach of children. Get medical advice immediately if swallowed. • Do not touch the interface pin directly by hands, metal or hard objects. • Do not modify or disassemble the MMCmicroTM card. • Do not wet, heat/fire, impact, drop or bend the MMCmicroTM card. • Do not use or store in a humid and dusty place; in hot place such as inside a hot car, under a blazing sun, near fire, a stove, an air-conditioner outlet, etc. • Do not expose to strong magnet fields, electrical noise and put near corrosive chemicals/gas. This may cause damage through melting or the emission of heat/smoke or cause product failure. • Do not place in cooking appliances such as microwave ovens or high-pressure containers. • Do not detach the label on the MMCmicroTM card and adapter. Do not attach other stickers/labels on the MMCmicroTM card and adapter.