Midland ct 790 Manuals

1 Content 1 CT 790 transceiver • 1 high gain antenna • 1 Li-ion battery pack • 1 desktop charger • 1 belt clip • 1 hand strap • If any item is missing or have been damaged during the shipment, please notify your MIDLAND dealer. Maintenance Your Two Way Radio is an electronic product of exact design and should be treated with care. The suggestions below will help you to fulfill any warranty obligations and to enjoy this product for many years. Do not attempt to open the unit. Non-expert handling of the unit may damage it. • Do not store the Radio under the sunshine or in hot areas. • High temperatures can shorten the life of electronic devices, and warp or melt certain plastics. • Do not store the radio in dusty and dirty areas • Keep the Radio dry. Rainwater or damp will corrode electronic circuits. • If it appears that the Radio diffuses peculiar smell or smoke, please shut off its power immedia- • tely and take off the charger or battery from the Radio. Do not transmit without antenna. • Main functions Dual Band, Dual Frequency, Dual Display and Dual Standby • Frequency Range: 144-146MHz & 430-440MHz (Rx / Tx). • Working mode: U-V, V-V or U-U available • Same channel: VHF T x & UHF Rx or UHF T x & VHF Rx available • DTMF Encoding • Digital FM Radio (76-108MHz) • CTCSS/DCS Frequency Scan • Output power: 5W VHF /4W UHF • Memory Channel: 128 channels • VOX Function • Stopwatch Function • 105 groups DCS and 50 groups CTCSS • Voice Prompt • SOS Function • Wide/Narrow Bandwidth selection (25KHz / 12.5KHz) • Channel number, Channel + Frequency or Channel name display mode available • Multi-functional Scan • Bright Flashlight illumination • Step (5/6.25/10/12.5/25KHz/50KHz/100KHz) • High/Low Power selection (5W/1W) • High Capacity Li-ion Battery • Intelligent Charger • Offset Frequency setting (0-69.950MHz) • Frequency shift Direction Setting •

English Version To unlock MIDLAND CT790 If you have an old ct 790 (2010 production without red stamp) it is necessary a software and connected the unit  to the PC; if you have a 'new' version of CT790 (after 2010 production with red stamp) to unlock the CT790 it is necessary this procedure: RX unlock: ‐ press hold key '6', switch ON the unit and insert the code '999999'; ‐insert the new operative band (136‐174 MHz VHF and 400‐470 MHz UHF), insert this code: '136174 400470:' ‐the radio will reboot. TX unlock ‐ press hold key '9', switch ON the unit and insert the code '666666'; ‐insert the new operative band (136‐174 MHz VHF and 400‐470 MHz UHF), insert this code: '136174 400470:' ‐the radio will reboot.