MIMAKI TS300P-1800 Manuals

1 Inkjet printer TS300P-1800 Requests for Care and Maintenance This machine is a precision machine equipped with extremely fine mechanisms. Especially, the nozzle sur- face of the heads from which the ink is discharged is affected even by a slightest attachment of dust or paper powder and the proper printing results could not be obtained. With a view to using this machine in a better condition, we would like to recommend performing the following care and maintenance on daily basis. 1. When to care When to care What to care Reference Page Once a day (at the end of the daily work) Surroundings of the heads P.2 Capping station P.3 Wiper P.4 Media press P.5 Media sensor P.5 Once a week (at the end of the work on weekend) Cleaning the Platen P.6 Exterior P.6 Waste ink tank P.6 Ink Discharge Passage P.7 Replace or clean when it is dirty Replacing the exhaust BOX filter P.8 Replacing the Exhaust BOX P.9 Replace the blow down fan filter P.10 When the Machine Is Not Used for a Long Time Perform “Storage Wash” P.12 Tools required for maintenance • Cleaning stick (SPC-0527) • Cleaning Liquid 03 MAINTENANCE KIT (ML003-2-K1) • Cotton swab • Gloves • Soft fabric

MIMAKI ENGINEERING CO., LTD. URL: http://eng.mimaki.co.jp/ You can also download the latest manual from our website. D202869-13 Original instructions

TS300P-1800 Print Guide (for TxLink3) Thank you for purchasing our inkjet printer TS300P-1800. This “Print Guide” explains the printing method using TS300P-1800 and the software RIP [TxLink3] and items to be checked/set before printing. First, confirm the following items: Before printing, the preparation for TS300P-1800 and the software RIP [TxLink3] is required. First, prepare the followings: About system configuration (Refer to P. 2) The explanation of the system configuration to print is described. Prepare TS300P-1800 (Refer to P. 3) To use TS300P-1800, the items below are explained:  Connect the PC in which the software RIP [TxLink3] has been installed with TS300P- 1800.  Turn on the power supply.  Depending on the media to be set, adjust the print head height etc.  Set the media.  Perform test printing to check whether there is no nozzle clogging etc.  Correct the feeding rate of media.  Correct the ink drop position. Prepare the TxLink3 (Refer to P. 4) The preparation of the software RIP [TxLink3] is explained. For the installation method, refer to the manual of the TxLink3. The printing method using a sample is explained. Here, the printing method using a sample image included in the attached CD. Perform printing (Refer to P. 7) Some typical questions are described. Typical questions (Refer to P. 9)

Mimaki Europe B.V. Textile and Apparel Products 01-10-2017 V1.22EU Product Guide The information in this document is subject to change without notice. Dye sublimation printer for for low cost production 1.8m Roll to Roll Printer for Transfer Dye Sublimation