Mitsubishi Electric PUHY-P192TSKMU-A Manuals

Job Name: Location: Engineer Name: Contractor: System No.: Date: Model: PUHY-P192TSKMU-A (Consists of One PUHY-P120TKMU-A, One PUHY-P72TKMU-A and One CMY-Y100CBK3 Twinning Kit) OUTDOOR VRF HEAT PUMP SYSTEM FEATURES • 3-phase, 208/230V • Modular variable refrigerant flow (VRF) systems; smaller capacity units can be piped together to form a single, large-capacity two-pipe system • Required Twinning Kit allows for easy field piping connection • Selectable fan static, 0.12 or 0.24"WG external static pressure; factory set to 0"WG • Connects to CITY MULTI indoor units; controlled via CITY MULTI Controls Network (CMCN) • External finish: Pre-coated Galvanized-steel Sheets • Operating Temperature Range Cooling (Outdoor): 23° ~ 115°F (-5° ~ +46°C) DB Heating (Outdoor): -4° ~ +60°F (-20° ~ +16°C) WB OPTIONAL PARTS □ Twinning Kit*.…………………………………...…….CMY-Y100CBK3 □ T-Branch Joint (≤ 72,000 Btu/h)………………..........CMY-Y102SS-G2 □ T-Branch Joint (≤ 144,000 Btu/h)……………….…....CMY-Y102LS-G2 □ T-Branch Joint (≤ 234,000 Btu/h)……………….........CMY-Y202S-G2 □ Header (4-Branch; ≤ 72,000 Btu/h)........………………CMY-Y104C-G □ Header (8-Branch; ≤ 144,000 Btu/h)......………………CMY-Y108C-G □ Header (10-Branch; ≤ 234,000 Btu/h)....………………CMY-Y1010C-G * Twinning Kit is necessary to combine the refrigerant flows of the modules and is sold separately. Specifications System Module 1 Module 2 Unit Type PUHY-P192TSKMU-A PUHY-P120TKMU-A PUHY-P72TKMU-A Nominal Cooling Capacity Btu/h 192,000 120,000 72,000 Nominal Heating Capacity Btu/h 215,000 135,000 80,000 External Dimensions (H x W x D) In. / mm Refer to Module Data 65 x 68-29/32 x 29-5/23 / 1,650 x 1,750 x 740 65 x 36-1/4 x 29-5/32 / 1,650 x 920 x 740 Net Weight Lbs. / kg 1,127 / 511 697 / 316 430 / 195 Electrical Power Requirements Voltage, Phase, Hertz Refer to Module Data** 208 / 230V, 3-phase, 60Hz** Cooling Power Input kW 14.81 Refer to System Data Heating Power Input kW 16.91 Cooling Current (208/230V) R.L.A. 45.6 / 41.3 Refer to System Data Heating Current (208/230V) R.L.A. 52.1 / 47.1 Minimum Circuit Ampacity (MCA)** A Refer to Module Data** 45 / 42** 25 / 23** Maximum Breaker Size** A Refer to Module Data** 50** 30** Maximum Overcurrent Protection** A Refer to Module Data** 73 / 67** 42 / 38** Piping Diameter Refer to System Data From Twinning Kit to Indoor Units (Brazed) (In. / mm) Liquid (High Pressure) 5/8 / 15.88 Gas (Low Pressure) 1-1/8 / 28.58 From Modules to Twinning Kit (Brazed) (In. / mm) Liquid (High Pressure) Refer to Module Data 1/2 / 12.7 3/8 / 9.52 Gas (Low Pressure) 1-1/8 / 28.58 7/8 x 22.2 Indoor Unit Total Capacity 50 to 130% of ODUs Refer to System Data Model / Quantity P06 ~ P96 / 2 to 41 Sound Pressure Levels dB(A) 62.5 60.0 58.0 Fan Refer to Module Data Type x Quantity Propeller Fan x 2 Propeller Fan x 1 Airflow Rate CFM 11,300 6,200 Direct-drive Inverter Motor Output kW 0.92 + 0.92 0.92 Compressor Operating Range 6% to 100% Refer to System Data Compressor Type x Quantity Refer to Module Data Inverter-driven Scroll Hermetic x 1 Inverter-driven Scroll Hermetic x 1 Compressor Motor Output kW 8.1 5.5 Compressor Crankcase Heater kW - - Refrigerant Refer to Module Data R410A Lubricant MEL32 High-pressure Protection Device Refer to Module Data 601 psi / 4.15 MPa 601 psi / 4.15 MPa Compressor / Fan Protection Device Overheat Protection / Thermal Switch Overheat Protection / Thermal Switch Inverter Protection Device Overheat / Overcurrent Protection Overheat / Overcurrent Protection Blue Fin Anti-corrosion Protection: Cellulose- and polyurethane-resin coating treatment applied to condenser coil that protects it from air contaminants; ≥1μm thick; Salt Spray Test Method - no unusual rust development to 480 hours. PUHY-P120TKMU-A ** Each individual module requires a separate electrical connection. Reference electrical data for each individual module. PUHY-P72TKMU-A