Mitsubishi SD205R Manuals

Value for the Cost Conscious The SD205R is an excellent choice for the cost conscious user who does not want to compromise on performance, quality and reliability. This ultra-portable DLP™ projector only weighs 5.3 lbs, native SVGA resolution, an amazing 2000:1 contrast ratio and shines bright at 2000 ANSI lumens for an impres- sively sharp images. It provides flexible connectivity options for both video and data, and is backed by Mitsubishi’s exclusive ERA Warranty programs. DLP™ technology Native SVGA (800x600) resolution 2000 ANSI lumens and a contrast ratio of 2000:1 Lightweight at only 5.3 lbs Anti-theft security hook Flexible connectivity options with support for monitor loop through 3-years or 10,000-hours on the TI-DLP DMD Chip, 2-years parts and labor, 2-years Express Replacement Assistance (ERA), 90-days lamp warranty The SD205R is designed to be small, lightweight, and at 2000 ANSI lumens it is powerful enough to impress any audience. SD205R SVGA DLP™ PROJECTOR www.mitsubishi-presentations.com ©2006 Mitsubishi Digital Electronics America, Inc. Standard features, options and specifications subject to change without notice. The DLP™ logo and DLP™ medallion are trademarks of Texas Instruments. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. Mac and the Mac logo are trademarks of Apple Computer, Inc, registered in the U.S. and other countries. All other trademarks are the property of their respective holders. *The projector lamp contains mercury. Please dispose of properly. PP6022-05/06-15M-LITSD205R Canada Mitsubishi Electric Sales Canada Inc. Information Technologies Group Phone: 905.475.7728 www mitsubishielectric ca MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. Presentation Products Division Toll Free: 888.307.0349 Email: [email protected] www.mitsubishi-presentations.com SCREEN DISTANCE FROM SCREEN (L) Hd Diagonal Size Width Height Max.Zoom Min.Zoom inch cm inch cm inch cm inch m inch m inch cm 40 102 32 81 24 61 50 1.3 60 1.5 3.5 8.8 60 152 48 122 36 91 76 1.9 91 2.3 5.2 13.3 80 203 64 163 48 122 101 2.6 121 3.1 7.0 17.7 100 254 80 203 60 152 126 3.2 151 3.8 8.7 22.1 150 381 120 305 90 229 189 4.8 227 5.8 13.1 33.2 200 508 160 406 120 305 252 6.4 302 7.7 17.4 44.2 250 635 200 508 150 381 315 8.0 378 9.6 21.8 55.3 300 762 240 610 180 457 378 9.6 - - 26.1 66.3 SD205R SVGA DLP™ PROJECTOR • Composite cable • Owner’s manual (CD-ROM) • Quick Guide Unit measured in millimeters (mm) DISPLAY TECHNOLOGY RESOLUTION BRIGHTNESS CONTRAST RATIO ZOOM/FOCUS PROJECTION LENS THROW RATIO OFF SET AXIS PICTURE SIZE SOURCE LAMP PC COMPATIBILITY VIDEO COMPATIBILITY INPUT TERMINALS OUTPUT TERMINAL COMMUNICATION TERMINAL SCANNING RATE AUDIO SPEAKER HEIGHT ADJUSTER HAND REMOTE UNIT POWER CONSUMPTION DIMENSION WEIGHT POWER REQUIREMENTS FAN NOISE SUPPLIED ACCESSORIES OPTIONAL ACCESSORIES WARRANTY 0.55", 1-Chip DMD, 12 deg. DDR, DDP2000 800 x 600 (Total 480,000 pixels), 500 Video Lines 2000 ANSI lumens (1700lm low lamp mode) 2000 : 1 (on/off) Manual Focus & Zoom Lens F= 2.4 (Wide) 100"@3.2 m (Wide) 1.56 - 1.87 7.9 : -1 up (No variable lens shift) 40-300 diagonal inches 205W (Shut Off Time 2000 Hrs) with Low Mode (164W: Shut Off Time 3000 Hrs) Resolution: 640 x 400 - 800 x 600 + Compressed 1024 x 768 Sync on Green available NTSC/NTSC 4.43/PAL (including PAL-M, N) /SECAM/PAL-60, Component Video; 480i/p (525i/p), 576i/p (625i/p), 720p (750p), 1080i (1125i 60Hz), 1080i (1125i 50Hz) RGB: Mini D-sub 15pin x 1 Audio: Stereo Mini Jack (ø 3.5mm) x 1 Video: RCA x 1 + S-VIDEO x 1 RGB: Mini D-sub 15pin x 1 Audio: Stereo minijack (ø 3.5mm) x 1 (variable lineout) USB terminal for Page Up/Down (with optional cable) [H] 15 - 80 kHz, [V] 50 - 85 Hz, [Dot Clock] max 110 MHz 2 W Mono Rearward lifting leg x 2, Push button front leg x1 1) Projector fully control, 2) Power Point™ Page Up/Down via USB (with optional cable) 280W/2.9A 10.28 x 8.58 x 3.42 inches (L x W x H) 5.29 lbs. AC 100-240V, 50/60 Hz 36 dBA (Low mode: 30 dBA) • Remote control • Power cable • VGA (D-sub) cable Replacement Lamp (VLT-XD205LP), Ceiling Mount (PROJ-UCM), Hard Shell Rolling Case(DKT1-ATAC), Soft Carry Case (XL1-SSCC) 3-years or 10,000-hours on the TI-DLP DMD Chip, 2-years parts and labor, 2-years Express Replacement Assistance (ERA), 90-days lamp warranty

DATA PROJECTOR MODEL XD430U SD430U User Manual This User Manual is important to you. Please read it before using your projector. EN ENGLISH EN-2 The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu- lated "dangerous voltage" within the product’s enclosure that may be of suffcient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING Use the attached specified power supply cord. If you use another power supply cord, it may cause interference with radio and television reception. Use the attached RGB cable with this equipment so as to keep inter- ference within the limit of an FCC Class B device. This apparatus must be grounded. DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE. CAUTION Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75. The attached power cords are to be used exclusively for this product. Never use them for other products. When using the projector in Europe: COMPLIANCE NOTICE This Projector complies with the requirements of the EC Directive 89/ 336/EEC "EMC Directive" as amended by Directive 92/31/EEC and 93/68/EEC, and 73/23/EEC "Low Voltage Directive" as amended by Directive 93/68/ EEC. The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterized by their connection to the public low voltage power supply system. WARNING Use the attached RGB cable with this equipment so as to keep inter- ference within the limits of an EN55022 Class B device. Please follow WARNING instructions. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUT- LET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. NOTE: SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note: This symbol mark is for EU countries only. This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV. Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please, dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic product. Please, help us to conserve the environment we live in! EN-3 ENGLISH Contents Important safeguards................................................................................................................................4 Overview...................................................................................................................................................6 Remote control .........................................................................................................................................8 Installation ................................................................................................................................................9 Basic connections...................................................................................................................................10 Preparation .............................................................................................................................................12 Basic operation.......................................................................................................................................13 Menu operation.......................................................................................................................................15 Image adjustment ...................................................................................................................................18 Advanced feature....................................................................................................................................20 Lamp replacement..................................................................................................................................22 Troubleshooting ......................................................................................................................................23 Indicators ................................................................................................................................................26 Specifications .........................................................................................................................................27 Trademark, Registered trademark Macintosh is registered trademark of Apple Computer Inc. DLP™, Digital Micromirror Device and DMD are all trademarks of Texas Instruments. Other brand or product names are trademarks or registered trademarks of their respective holders. Declaration of Conformity Model Number : XD430U/SD430U Trade Name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road, Irvine, CA 92618 U.S.A Telephone number : +1-(949) 465-6000 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EN-4 Important safeguards Please read all these instructions regarding your projector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions The safety and operating instructions should be retained for future reference. 3. Warnings All warnings on the appliance and in the operating instructions should be adhered to. 4. Instructions All operating instructions must be followed. 5. Cleaning Unplug this projector from the wall outlet before cleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for clean- ing. 6. Attachments and equipment Never add any attachments and/or equipment without the approval of the manufacturer as such additions may result in the risk of fire, electric shock or other personal injury. 7. Water and moisture Do not use this projector near water or in contact with water. 8. Accessories Do not place this projector on an unstable cart, stand, tripod, bracket or table. Use only with a cart, stand, tripod bracket, or table recommended by the manufacturer or sold with the projec- tor. Any mounting of the appliance should follow the manufac- turer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn. 9. Ventilation Slots and openings in the cabinet are provided for ventilation, ensuring reliable operation of the projector and to protect it from overheating. Do not block these openings or allow them to be blocked by placing the projector on a bed, sofa, rug, or book- case. Ensure that there is adequate ventilation and that the man- ufacturer’s instructions have been adhered to. 10. Power sources This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power, please consult your appliance dealer or local power company. 11. Power-cord protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and points where they exit from the appliance. Do not put the power cord under a carpet. 12. Overloading Do not overload wall outlets and extension cords as this can result in a fire or electric shock. 13. Objects and liquids Never push objects of any kind through openings of this projec- tor as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector. 14. Servicing Do not attempt to service this projector yourself. Refer all servic- ing to qualified service personnel. 15. Damage requiring service Unplug this projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: (a) If the power-supply cord or plug is damaged. (b) If liquid has been spilled, or objects have fallen into the pro- jector. (c) If the projector does not operate normally after you follow the operating instructions. Adjust only those controls that are covered by the operating instructions. An improper adjustment of other controls may result in damage and may often require extensive work by a qualified technician to restore the projector to its normal operation. (d) If the projector has been exposed to rain or water. (e) If the projector has been dropped or the cabinet has been damaged. (f) If the projector exhibits a distinct change in performance - this indicates a need for service. 16. Replacement parts When replacement parts are required, be sure that the service technician has used replacement parts specified by the manu- facturer or parts having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 17. Safety check Upon completion of any service or repair to this projector, ask the service technician to perform safety checks determining that the projector is in a safe operating condition.

DATA PROJECTOR MODEL XD205U/XD205U-G/XD205R SD205U/SD205R User Manual This User Manual is important to you. Please read it before using your projector. EN ENGLISH EN-2 The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsu- lated "dangerous voltage" within the product’s enclosure that may be of suffcient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING Use the attached specified power supply cord. If you use another power supply cord, it may cause interference with radio and television reception. Use the attached RGB cable with this equipment so as to keep inter- ference within the limit of an FCC Class B device. This apparatus must be grounded. DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE. CAUTION Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/Data Processing Equipment, ANSI/NFPA 75. The attached power cords are to be used exclusively for this product. Never use them for other products. When using the projector in Europe: COMPLIANCE NOTICE This Projector complies with the requirements of the EC Directive 89/ 336/EEC "EMC Directive" as amended by Directive 92/31/EEC and 93/68/EEC, and 73/23/EEC "Low Voltage Directive" as amended by Directive 93/68/ EEC. The electro-magnetic susceptibility has been chosen at a level that gains proper operation in residential areas, on business and light industrial premises and on small-scale enterprises, inside as well as outside of the buildings. All places of operation are characterized by their connection to the public low voltage power supply system. WARNING Use the attached RGB cable with this equipment so as to keep inter- ference within the limits of an EN55022 Class B device. Please follow WARNING instructions. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUT- LET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. NOTE: SINCE THIS PROJECTOR IS PLUGGABLE EQUIPMENT, THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Note: This symbol mark is for EU countries only. This symbol mark is according to the directive 2002/96/EC Article 10 Information for users and Annex IV. Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and reused. This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of separately from your household waste. Please, dispose of this equipment at your local community waste collection/recycling centre. In the European Union there are separate collection systems for used electrical and electronic product. Please, help us to conserve the environment we live in! EN-3 ENGLISH Contents Important safeguards................................................................................................................................4 Overview...................................................................................................................................................6 Remote control .........................................................................................................................................8 Installation ................................................................................................................................................9 Basic connections...................................................................................................................................10 Preparation .............................................................................................................................................12 Basic operation.......................................................................................................................................13 Menu operation.......................................................................................................................................15 Image adjustment ...................................................................................................................................18 Advanced feature....................................................................................................................................20 Lamp replacement..................................................................................................................................22 Troubleshooting ......................................................................................................................................23 Indicators ................................................................................................................................................26 Specifications .........................................................................................................................................27 Trademark, Registered trademark Macintosh is registered trademark of Apple Computer Inc. DLP™, Digital Micromirror Device and DMD are all trademarks of Texas Instruments. Other brand or product names are trademarks or registered trademarks of their respective holders. Declaration of Conformity Model Number : XD205U/XD205U-G/XD205R/SD205U/SD205R Trade Name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road, Irvine, CA 92618 U.S.A Telephone number : +1-(949) 465-6000 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EN-4 Important safeguards Please read all these instructions regarding your projector and retain them for future reference. Follow all warnings and instructions marked on the projector. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated. 2. Retain instructions The safety and operating instructions should be retained for future reference. 3. Warnings All warnings on the appliance and in the operating instructions should be adhered to. 4. Instructions All operating instructions must be followed. 5. Cleaning Unplug this projector from the wall outlet before cleaning it. Do not use liquid aerosol cleaners. Use a damp soft cloth for clean- ing. 6. Attachments and equipment Never add any attachments and/or equipment without the approval of the manufacturer as such additions may result in the risk of fire, electric shock or other personal injury. 7. Water and moisture Do not use this projector near water or in contact with water. 8. Accessories Do not place this projector on an unstable cart, stand, tripod, bracket or table. Use only with a cart, stand, tripod bracket, or table recommended by the manufacturer or sold with the projec- tor. Any mounting of the appliance should follow the manufac- turer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force and uneven surfaces may cause the appliance and cart combination to overturn. 9. Ventilation Slots and openings in the cabinet are provided for ventilation, ensuring reliable operation of the projector and to protect it from overheating. Do not block these openings or allow them to be blocked by placing the projector on a bed, sofa, rug, or book- case. Ensure that there is adequate ventilation and that the man- ufacturer’s instructions have been adhered to. 10. Power sources This projector should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power, please consult your appliance dealer or local power company. 11. Power-cord protection Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and points where they exit from the appliance. Do not put the power cord under a carpet. 12. Overloading Do not overload wall outlets and extension cords as this can result in a fire or electric shock. 13. Objects and liquids Never push objects of any kind through openings of this projec- tor as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector. 14. Servicing Do not attempt to service this projector yourself. Refer all servic- ing to qualified service personnel. 15. Damage requiring service Unplug this projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: (a) If the power-supply cord or plug is damaged. (b) If liquid has been spilled, or objects have fallen into the pro- jector. (c) If the projector does not operate normally after you follow the operating instructions. Adjust only those controls that are covered by the operating instructions. An improper adjustment of other controls may result in damage and may often require extensive work by a qualified technician to restore the projector to its normal operation. (d) If the projector has been exposed to rain or water. (e) If the projector has been dropped or the cabinet has been damaged. (f) If the projector exhibits a distinct change in performance - this indicates a need for service. 16. Replacement parts When replacement parts are required, be sure that the service technician has used replacement parts specified by the manu- facturer or parts having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 17. Safety check Upon completion of any service or repair to this projector, ask the service technician to perform safety checks determining that the projector is in a safe operating condition.