Mocka Eclipse Manuals

Eclipse Cot
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Ensure the cot is placed at a reasonable distance from curtains, blinds, heaters
and power points. Keep all medications, string, elastic, small toys or small items,
such as money, out of reach from any position in the cot.
Assembly
Care must be taken when attaching sides. Do not over-tighten screws as this can
cause damage to the cot.
Care and Maintenance
Regularly check all screws for tightness or damage that could render the cot
unsafe. To clean - use a damp cloth, avoiding the use of detergents or abrasives.
Recommended mattress size
This cot has been manufactured for use with a mattress which measures 1300mm
long x 690mm wide x 100mm in thickness.  The width and length are specified
because it is important that gaps between the mattress and the sides and ends
of the cot will not exceed 40mm. This is to minimize the risk of a child’s limb
becoming caught in the gap. The thickness of the mattress has been specified to
ensure that the depth of the cot is greater than 500mm with the mattress base in
the lower position to minimize the risk of a child climbing or falling out of the cot.
Hardware Supplied
B
A
x1
Allen key
x14
screw
Please follow the manufacturer’s assembly instructions in detail
to ensure the safety features of the cot are not compromised.
WARNING:TO PREVENT FALLS,THE MATTRESS BASE
OF THIS COT SHOULD BE ADJUSTED TOTHE LOWEST
POSITION BEFORE THE CHILD CAN SIT UP
Side Panel
Cot Mattress Base
End Panel

Eclipse Buffet
Assembly Instructions
1
Wall Strap
x4
washer
Z
Y
wall
anchor
x2
X
safety
strap x2
W
V
screw
x2
wall
screw
x2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
WARNING:  Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
x16
A
B
C
D
E
F
G
H
J
K
L
M
N
I
O
P
Hardware Supplied
dowel
x20
screw
x6
bolt
x14
screw
x18
screw
x48
locking
nut x 14
wedge
x16
bolt
x10
screw
buffer
plate
 x4
Allen
Key
 x1
Phillips & Flathead screwdrivers
hinge
   x8
screw
x2
 height
adjuster
    x2
handle
x4
handle
screw
x8
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production.  For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz

Eclipse Two Door Cabinet
Assembly Instructions
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
W
V
screw
x1
wall
screw
x1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
x8
A
B
C
D
E
F
G
J
K
L
M
N
I
Hardware Supplied
dowel
x12
screw
x4
bolt
x8
screw
x9
screw
x24
locking
nut x8
wedge
x8
bolt
x8
screw
Allen
Key
 x1
screw
x2
hinge
   x4
H
buffer
plate
 x2
handle
x2
handle
screw
x4
O
shelf
plug
x4
P
WARNING:  Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production.  For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz

Eclipse Console Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
W
V
screw
x1
wall
screw
x1
WARNING:  Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x10
x4
A
B
C
D
E
F
G
H
J
K
L
M
I
Hardware Supplied
dowel
x12
screw
x10
slide
rail x1
slide
rail x1
slide
rail x1
slide
rail x1
locking
nut x10
screw
x6
wedge
x4
screw
Phillips & Flathead screwdrivers
bolt
x12
handle
x1
N
 screw
x1
Allen
Key
x1
O
P
screw
x14
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production.  For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz