Modern Flames Pro Series Manuals

Pro Series Remote Power Heat Cycle between High-Low-Off Fade Cycle between all colors Sync All zones sync to flame color Color Select zone then use dial to pick color Reset All zones reset to default setting Flame Select zone then use wheel or bar Ember Bed Select zone then use wheel or bar Downlight Select zone then use wheel or bar 3 Zones Intensity Select zone then slide bar to pick any intensity Pro Series Remote Pairing the Hand Held Remote 1. With the fireplace ON press and hold the fireplace ON/OFF button for about 3 seconds until you hear the buzzer sound twice and the power indicators begin to flash. (power indicators located top right of viewing area). 2. Within 5 seconds on the hand held remote press the ON/OFF(power) button repeatedly until the buzzer sounds again and the indicators flash acknowledging that it has paired. You may also hear another buzzer and the pair is now completed. - Pairing must be done within 5 seconds or the fireplace will time out of pairing mode. - To clear any paired remotes from the unit locate then press and hold the reset button for 3 seconds. You should hear a buzzer letting you know the codes have been cleared so you can now pair a new remote or wall control. (The reset is located next to the manual controls and can be pressed with a paper clip).