Modern Flames SPS-50B-AU Manuals

AC 230V 50Hz 1465W (5000BTUs) BGM20201123.V2 SPECTRUM SLIMLINE WALL MOUNT/RECESSED ELECTRIC FIREPLACE Model# : SPS-50B-AU SPS-60B-AU SPS-74B-AU SPS-100B-AU OWNER’S MANUAL Read and understand this entire owner’s manual, including all safety information, before plugging in or using this product. Failure to do so could result in fire, electric shock, or serious personal injury. Keep this owner’s manual for future reference. If you sell or give this product away, make sure this manual accompanies this product. AFFIX SERIAL NUMBER LABEL HERE FOR FUTURE REFERENCE WARNING CAUTION 2 IMPORTANT SAFETY INFORMATION! WARNING l Read all instructions before installing or using this heater. l Use a dedicated 10 Amp (or higher) breaker. l This heater is hot when in use. To avoid burns, DO NOT let bare skin touch hot surfaces. If provided, use handles when moving this heater. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9m) from the front of the heater, and keep them away from the sides and rear. l Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating and unattended. l Do not operate any heater after it malfunctions. Disconnect power at service panel and have heater inspected by a reputable electrician before reusing. l Do not use outdoors. l To disconnect heater, turn controls to off, and turn off power to heater circuit at main disconnect panel (or operate internal disconnect switch if provided). l Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock, fire, or damage the heater. l To prevent a possible fire, do not block air intakes or exhaust in any manner. l A heater has hot arcing or sparking parts inside. Do not use in areas where gasoline, paint, flammable vapors, or liquids are used or stored. l Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. l This heater may include an audible or visual alarm to warn that parts of the heater are getting excessively hot. If the alarm sounds (or illuminates), immediately turn the heater off and inspect for any objects on or adjacent to the heater that may have blocked the airflow or otherwise caused high temperatures to have occurred. DO NOT OPERATE THE HEATER WITH THE ALARM SOUNDING (OR ILLUMINATING). l ALWAYS plug heaters directly into a wall outlet/receptacle. NEVER use with an extension cord or relocatable power tap (outlet/power strip). l NEVER use this heater in bathrooms, laundry rooms, or any other location where the heater could fall into a bathtub, pool, become damp, or come in contact with water. l AVOID FIRE! Regularly inspect all air vents to make sure they are free from dust, lint, or other blockage. Unplug the unit and clean with a vacuum ONLY. DO NOT rinse or get wet. l ALWAYS mount to wall bracket before use. DO NOT set on the floor, or other surface, to use. l NEVER use a wall mount bracket from another manufacturer. l This product is not intended to be a primary heat source. It is for supplemental heat only. l INDOOR use only! NEVER use this heater outdoors! Doing so may result in electric shock! 3 l ALWAYS disconnect this unit from the power supply before performing any assembly or cleaning, or before relocating the electric fireplace. l NEVER leave this heater unattended. ALWAYS unplug this heater when not in use. l ALWAYS store this heater in a dry location. NEVER use the fireplace if it has become wet. l NEVER plug this heater into an outlet that is old, cracked, or has any loose wires or connections. Plugging this heater into a faulty outlet could result in electric arcing within the outlet that could cause the outlet to overheat or catch fire. l ALWAYS check your heater cord and plug connections with each use. i) MAKE SURE the plug fits tight in the outlet. Faulty wall outlet connections or loose plugs can cause the outlet to overheat. ii) Heaters draw more current than small appliances. Overheating may occur even if it has not occurred with the use of other appliances. iii) During use check frequently to see if the plug outlet or face plate is HOT. iv) If the outlet or face plate is HOT, discontinue use immediately and have a qualified electrician inspect and/or replace the faulty outlets. l SAVE THESE INSTRUCTIONS. Preparation Remove all parts and hardware from the carton and place them on a clean, soft, dry surface. Parts and assembly steps are grouped for wall-hanging or recessing use. Check the parts list to make sure nothing is missing. Dispose of packaging materials properly. Please recycle whenever possible. You will need the following tools (not included): Phillips screwdriver, stud finder, level, tape measure, electric drill, 1/4” wood drill bit, hammer. This product includes a GLASS panel. Always use extreme caution when handling glass. Failure to do so could result in personal injury or property damage.