Modulex MMT-101/TLF/01 Manuals

Weight 0.34kg The fixture is for indoor use only in general conditions. Can not be used following conditions (Causes of falling, electrocution and fire) ●Ambient temperature under 0℃ and over 35℃ ●High humidity ●Outside ●On the floor ●Insulated inside of ceiling 20cm～ 10cm～ ●Vibrated or shocked areas ●Areas get direct sunlight ●Inclined, uneven surface ●Ceiling which can’t hold the fixture weight ●On the wall ●Places affected by wind or air-conditioner machine ●Near fire ●Dusty areas, corrosive gas outbreaks areas Before installation Warning Caution Please contact if you are not able to judge whether installation environment is suitable to the places or not. Insulator Insulator Insulator To install the fixture safely《 Read carefully and follow all the instructions in the guide 》 Warning : Failure to install the fixture properly could result in personal injury. Failure to install the fixture properly could result in property damage. : Prohibited : Strict observance Caution : Warning Please follow the fixtures’ indication or specification for the distance of irradiated area. (Causes of change in shape, change in color of irradiated objects) At lighting fixture installation Caution Make sure the construction will not affect any fire prevention systems such as sprinkler by heat from the fixture. (Causes for improper operation) Please follow the fixtures’ instruction or this guide to install the fixture and lamp. (Causes of falling・electrification・fire) Make sure to install all the parts of fixtures besides installation and mounting parts will not touch with any objects both inside and outside of ceiling such as lighting track, etc. (Causes of falling・electrification・fire) Do not dismount or remodel fixtures. (Cause of electrification・fire・falling・broken fixtures) hole dimension for mounting 162×162 Conformity ceiling thickness 12.5～25mm TRIMLESS FRAME Installation Guide Mounting Installation Guide Mounting MMT-101/TLF/01