modway EEI-2988 Manuals

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 6 EEI–2988 ARMLESS CHAIR & OTTOMAN Thank you for purchasing the MODWAY CHAIR AND OTTOMAN！ Before you start, here are some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2.Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for. Approximate assembly time: 45 minutes. 3.Please do not use any tools other than those provided or recommended in these instructions. 4.Please do not throw away any of the packaging or the instruction until you have checked all the components and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and environmentally friendly way. 5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the components from time to time, so please save the tools that have been provided. 6.Please keep all fitting out of reach of children. Hardware: A D Allen Wrench M5 x1 Component: 1 Chair Body x1 3 Chair Back Leg x2 Short Bolt M8x60mm x8 1 4 5 2 B Long Bolt M8x70mm x8 C Flat Washer M8 x16 2 Chair Front Leg x2 3 5 5 4 Ottoman Body x1 5 Ottoman Leg x4 Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 6 EEI–2988 ARMLESS CHAIR & OTTOMAN STEP 1: Put Chair Body (1) and Ottoman Body (4) upside down on a carpeted or padded surface. Open Velcro on bottom of Chair Body (1), Ottoman Body (4) and find the package of Front Legs (2), Back Legs (3), Ottoman Legs (5) and Hardware as shown. Hardware & Tools required Ax2 Bx2 Cx4 Dx1 Package of Chair Front Legs, Chair Back Legs, Ottoman Legs and Hardware 1 Velcro B D STEP 2: Make the position for assembling Chair Front Legs (2) and Chair Back Legs (3) fully visible. Place 2 pieces of Chair Front Leg (2) to the front position of Chair Body (1) as shown. Insert 2 pieces of Short Bolt (A) with 2 pieces of Flat Washer (C) into the bottom pre-drilled holes on Chair Front Legs (2) through the bottom pre-drilled on the front of Chair Body (1). Insert 2 pieces of Long Bolt (B) with 2 pieces of Flat Washer (C) into the top pre-drilled holes on Chair Front Legs (2) through the top pre-drilled on the front of Chair Body (1). Use Allen Wrench (D) to tighten Short Bolts (A) and Long Bolts (B). Do not fully tighten the Bolts (A&B) at this step. Velcro 1 2 C A C 2 2 A C B B C C C A D Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 6 EEI–2988 ARMLESS CHAIR & OTTOMAN STEP 3: STEP 4: Place 2 pieces of Chair Back Leg (3) to the front position of Chair Body (1) as shown. Insert 2 pieces of Short Bolt (A) with 2 pieces of Flat Washer (C) into the bottom pre-drilled holes on Chair Back Legs (3) through the bottom pre-drilled on the front of Chair Body (1). Insert 2 pieces of Long Bolt (B) with 2 pieces of Flat Washer (C) into the top pre-drilled holes on Chair Back Legs (3) through the top pre-drilled on the front of Chair Body (1). Use Allen Wrench (D) to tighten Short Bolts (A) and Long Bolts (B). Do not fully tighten the Bolts (A&B) at this step. D 1 Hardware & Tools required Ax2 Bx2 Cx4 Dx1 3 3 2 2 3 1 A C C B D C A D C B C A C B Carefully turn over the assembled chair. Please put a heavy object or seat one adult on top of the assembled Chair to pressure the chair for leveling. Turn upside down again, then use Allen Wrench (D) to tighten Short Bolts (A) and Long Bolts (B) clockwise until secure. Hardware & Tools required Dx1 Customer Service 908-368-1025︱www.modwayfurniture.com Page 4 of 6 EEI–2988 ARMLESS CHAIR & OTTOMAN STEP 5: Carefully cover the bottom of Chair Body (1) by Velcro as shown. Carefully turn over the assembled Chair. STEP 6: 1