Molpir DD-MOL-005 Manuals

Installation manual Date: 28. 9. 2020 NM_DD-MOL-005_000_28092020_EN.doc ©MOLPIR 2020. All rights reserved . Disinfectant dispenser; non-contact; spray; for the pole with diameter 30 mm Ordering code: DD-MOL-005 Thank You for purchasing our product. Read this Installation manual carefully before the installation of the product. Date: 28. 9. 2020 NM_DD-MOL-005_000_28092020_EN.doc Page 2/12 Components list Note: The dispenser ① has already mounted the bracket ③ on its back. Poz. Poz. Poz. Poz. Názov Názov Názov Názov Kód Kód Kód Kód KKKKssss ① Disinfectant dispenser; non-contact; 600 ml; spray; white DD-MOL-000 1 ② Disinfectant dispenser key DD-MOL-302 1 ③ Bracket plate of disinfectant dispenser for the pole with 30 - 35 mm diameter 0811377-M 1 ④ Reduction for clamping on the rod d = 30mm; for non-contact dispenser 0811378-M 1 ⑤ Bracket for the pole with 30 mm diameter 0811379-M 2 ⑥ Rear cover of the dispenser for the pole diameter 30/34/ 35mm 068754-M 1 ⑦ Gasket for the rear cover of the dispenser for the pole diameter 30 mm 0690030-30 2 ⑧ Screw M5x20 mm with round head Torx 25 105BN6404M5x20 4 ⑨ Screw M4x10 mm with round head Torx 20 104BN6404M4x10 4 ⑩ Washer D4,3 mm x D12 mm x H1,6 mm 104BN733D4 4 ⑪ Screw M4x10mm with round head Torx 20 104BN6404M4x10 6 ⑫ Self-tapping screw 4,8x19mm with round head; Philips 104BN18784,8x19 1 ⑬ Disinfectant tank ND-DD-MOL-000.1 1 ⑭ Control unit of the dispenser ND-DD-MOL-000.2 1 Date: 28. 9. 2020 NM_DD-MOL-005_000_28092020_EN.doc Page 3/12 Tools necessary for the installation • screwdriver Torx 20 • screwdriver Torx 25 • scissors • Driver-Drill + Philips bit (for mounting self-tapping screw ⑫) Installation procedure Mount the brackets ⑤ with the screws ⑧. Before Place the dispenser on propper place. Palcing the dispenser to the pole insert the reduction For clamping for the pole diameter 30 mm ④.