Motorola 5440AP - Canopy 5.4 GHz AP Manuals

Canopy® 400 Series User Guide (OFDM AP and SM) Supplement to the Canopy System Release 8 User Guide Version: 1 Issued: April, 2008 Canopy 400 Series OFDM AP and SM User Guide Version 1, April 2008 Page 2 of 40 Notices See important safety notice on exposure distance in Section 6.3 on page 36. See important regulatory and legal notices in Section 2 on page 6. Trademarks, Product Names, and Service Names MOTOROLA, the stylized M Logo, Canopy, and all other trademarks indicated as such herein are registered trademarks of Motorola, Inc. ® Reg. US Pat & Tm. Office. MOTOwi4 is a trademark of Motorola, Inc. All other product or service names are the property of their respective owners. © 2008 Motorola, Inc. All rights reserved http://www.motorola.com/canopy Canopy 400 Series OFDM AP and SM User Guide Version 1, April 2008 Page 3 of 40 Table of Contents 1 Introduction ............................................................................................................... 4 2 Product Description.................................................................................................. 6 3 Planning................................................................................................................... 12 4 Configuring.............................................................................................................. 15 5 Installation ............................................................................................................... 26 6 Regulatory and Legal Notices ............................................................................... 32 List of Tables Table 1: Performance Details........................................................................................ 11 Table 2: Channel Center Frequencies, by Region......................................................... 12 Table 3: Control Slot Settings........................................................................................ 18 Table 4: Release 8.4 Operation based on Region Code ............................................... 19 Table 5: Typical "External Antenna Gain" Values.......................................................... 25 Table 6: US FCC IDs and Industry Canada Certification Numbers and Covered Configurations ........................................................................................................ 33 Table 7: Disclosure Table ............................................................................................. 36 Table 8: Exposure Separation Distances ...................................................................... 36 Table 9: Calculated Exposure Distances and Power Compliance Margins.................... 37 List of Figures Figure 1: Canopy 400 Series OFDM SM (with integrated antenna) or OFDM AP (connectorized, without antenna) 6 Figure 2: Canopy 400 Series OFDM AP (connectorized radio and antenna) 7 Figure 3: LOS, nLOS, and NLOS 8 Figure 4: Dynamic Rate Adapt on AP "Configuration => General" page 16 Figure 5: Region Code on AP “Configuration => General” page 21 Figure 6: Configured Region Code on SM Configuration => General page 22 Figure 7: Active Region Code on SM Home => General Status page 22 Figure 8: Alternate Frequencies, and Antenna Gain on “Configuration => Radio” page 24 Figure 9: Ground lug highlighted on AP 30 Canopy 400 Series OFDM AP and SM User Guide Version 1, April 2008 Page 4 of 40 1 Introduction This Canopy 400 Series OFDM AP and SM Supplement to the Canopy System Release 8 User Guide includes product description, planning, configuration, and installation information specific to the Canopy 400 Series products. It should be especially useful for the experienced Canopy operator as it is focused on the new information associated with the Canopy 400 Series products and assumes significant experience with general Canopy equipment and operation. This supplemental guide is intended to be used along with the Canopy System Release 8 User Guide, which covers general Canopy information including all the features common between Canopy 400 Series and standard Canopy. The Canopy System Release 8 User Guide is available from the “User Guides” section of the Canopy web site, at http://motorola.canopywireless.com/support/library/. In addition to Canopy knowledge and experience, this guide assumes that the reader has general RF (Radio Frequency) and Internet Protocol (IP) knowledge and background. 1.1 ABBREVIATIONS The following abbreviations may be used in these notes: 1X 1X operation, with typical max aggregate (up and down) throughput of 7 Mbps (2 Mbps for 900 MHz) 2X 2X operation, with typical max aggregate (up and down) throughput of 14 Mbps (4 Mbps for 900 MHz) AP Access Point Module BH Backhaul Module, either timing master or timing slave BHM Backhaul Module – timing master BHS Backhaul Module – timing slave CMM Cluster Management Module CNUT Canopy Network Updater Tool DFS Dynamic Frequency Selection for radar avoidance EIRP Equivalent Isotropically Radiated Power ETSI European Telecommunications Standards Institute FSK Frequency Shift Keying MIB Management Information Base for SNMP OFDM Orthogonal Frequency Division Multiplexing PtP Point-to-Point (Backhauls) PtMP Point-to-Multi-Point (AP to SMs) QAM Quadrature Amplitude Modulation QPSK Quadrature Phase Shift Keying RF Radio Frequency SM Subscriber Module 1.2 DOCUMENT CHANGE HISTORY Issue 1 First Issue

Draft for Regulatory Approval Supplement to the Canopy System Release 8 User Guide PMP 400 Series Networks PTP 200 Series Bridges Issue 3 January 2009 PMP 400 and PTP 200 Series Canopy User Guide Supplement Issue 3, January 2009 Page 2 of 45 Notices See important safety notice on exposure distance in Section 6.3 on page 40. See important regulatory and legal notices in Section 2 on page 6. Trademarks, Product Names, and Service Names MOTOROLA, the stylized M Logo, Canopy, and all other trademarks indicated as such herein are registered trademarks of Motorola, Inc. ® Reg. US Pat & Tm. Office. MOTOwi4 is a trademark of Motorola, Inc. All other product or service names are the property of their respective owners. © 2009 Motorola, Inc. All rights reserved http://www.motorola.com/canopy PMP 400 and PTP 200 Series Canopy User Guide Supplement Issue 3, January 2009 Page 3 of 45 Table of Contents 1 Introduction ............................................................................................................... 4 2 Product Description.................................................................................................. 6 3 Planning................................................................................................................... 13 4 Configuring.............................................................................................................. 17 5 Installation ............................................................................................................... 29 6 Regulatory and Legal Notices ............................................................................... 36 List of Tables Table 1: Products and Model Numbers ...........................................................................6 Table 2: Performance Details........................................................................................ 12 Table 3: 5.4 GHz Channel Center Frequencies, by Region........................................... 13 Table 4: 4.9 GHz Channel Center Frequencies............................................................. 13 Table 5: Control Slot Settings........................................................................................ 20 Table 6: Release 8.4 Operation based on Region Code ............................................... 21 Table 7: US FCC IDs and Industry Canada Certification Numbers and Covered Configurations ........................................................................................................ 37 Table 8: Disclosure Table ............................................................................................. 40 Table 9: Exposure Separation Distances ...................................................................... 40 Table 10: Calculated Exposure Distances and Power Compliance Margins.................. 41 List of Figures Figure 1: Radio (with or without integrated antenna) 7 Figure 2: PMP 54400 AP with connectorized radio and antenna 7 Figure 3: PMP 49400 AP with connectorized radio and antenna 8 Figure 4: LOS, nLOS, and NLOS 9 Figure 5: Dynamic Rate Adapt on AP "Configuration => General" page 18 Figure 6: Region Code on AP “Configuration => General” page 24 Figure 7: Configured Region Code on SM Configuration => General page 25 Figure 8: Active Region Code on SM Home => General Status page 25 Figure 9: Ground lug highlighted on AP 34